Line Filter

Filters, EMI. 115/250VAC 47-63Hz 15Amp. Dimensions: 6.6" long x 3.75" wide x 2.75" high. Used/Removed from equipment. Learn More

CAPTOR CORP - A1501 - Filter, RF.

5Amp 100VDC

85 Degree C.

Mount: Bushing.

Contacts: Solder Terminals.

Dimensions: Overall 7/16" D x 1-3/4" long, including terminals.

Learn More

PASS BAND 0 to Fe / STOP BAND 1.5Fe & Higher. 10K to 10K. Shielded - about 1.7" x 1.2" x 2.5" high, with 4 screw terminals for mounting. Learn More

SCHAFFNER - FN406-0.5-02 - Filters, Line.

125/250 VAC 50-60 Hz. 0.5A@40DegC / -25 + 85DegC.

Inductance, 24mH.

Mount PCB 5 pin Ultra Compact.

Filter Type: PCB Filter    

Voltage Rating: 250 VAC              

Current Rating: 500 mA

Mounting Style: Through Hole    

Termination Style: Solder Pin     

Leakage Current: 190 uA              

Approvals: UL, CSA, IEC/EN         

Operating Frequency: 0 Hz to 400 Hz      

Unit Weight: 1.269863 oz

 

Learn More

Filter, EMI. 1Amp 250VAC 50/60Hz. Power entry module with an IEE male plug. Listed: UL/CSA. Learn More

Filter, EMI. Suppression. LC high frequency 240pF. DC Resistance: 3.5 Ohm. Tolerance: 20%. Series: EMIFIL�. Type: low pass. Number of channels: 1. Frequency: 20MHz (Cutoff). Current: 100mA. Current max: 2A. Values: L = 700nH, C = 240pF. Filter order: 3rd. Package: SMD 0805 (2012 metric), 3 PC Pad. Dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm). Height: 0.037" (0.95mm). Operating temperature: -55 to 125 Deg C. Note LS; Low cut off frequency type for UHF band noise which affects to digital TV tuner. Learn More

MURATA - LFB212G45BA1A220 Filter, bandpass.

Signal conditioning 2.45GHz.

Impedance type: 50 Ohm.

Package: 0805 SMD.

Package of 10.

Learn More

Murata Erie - CFW455F Filter, ladder. 455KHz.

Insertion loss 6 dB.

Input/output impedance 2K Ohm.

Damping width: 12 kHz.

Pass bandwidth: 6 kHz.

Spurious Emission Attenuation: 35 dB.

Application: These steep-edge filters are used in high-quality amateur radio and TV receivers.

Package: Miniature 5 pin dip. (Actual 4-Pin one side/ one pin opposite side).

Dimensions: (L x W x H) 11,7 x 7 x 8,5 mm.

Learn More

Filter, low pass. 50 Ohm. DC to 81MHz. Package: 8 Dip, hermetically sealed. Learn More

X2 Frequency multiplier. 50-Ohm. Output: 0.1 to 300MHz. Case: L20. More info: http://www.minicircuits.com/pdfs/GK-3.pdf Learn More

Golledge - CFU455D2 Filter, ceramic. 0.455 MHz.

Mount: PCB, 3 pin.

Dimension: 8mm x 7mm x 8mm high.

New.

Note: More info: http://pdf1.alldatasheet.com/datasheet-pdf/view/87505/ETC/CFU455B2.html

Learn More

6A 250VAC Filters with attached wire harness. RFE/Used Learn More

8 x 1.19uF 600VDC 12-Terminal / heavy solder hooks. Hermetically sealed silver box - Capacitor NW-713 Learn More

EMI Filter. 20Amp 120/250VAC 50-60Hz. Mount: Panel. Listed: UL/CSA. Note: Tyco P/N 1-1609021-1. Learn More

CORCOM - 20EK1 - EMI Filter.

20Amp 120/250VAC 50-60Hz.

Mount: Panel.

Listed: UL/CSA.

More info: http://www.te.com/catalog/products/en?q=20EK1

Learn More

CORCOM - 20K6 EMI Filters

20Amp 115/250VAC 50/60HZ

2" x 2" x 1-1/2"

New

Learn More

Carter Craft Communications - 90-012 - CB/HAM Radio Alternator / Generator Filter, 3 to 30 MHz.

Radio Noise Suppressor Filter

Maximum Current: 25 Amps

Filters "Whining" Noise from Generator Brushes

Easily Installed in Minutes

Large Inductor and Tunable Ceramic Capacitor design for maximum efficiency

For 6, 12 or 24 VDC Systems

Installation instruction attached and on Packaging.

New Old Stock - Made in USA

Alternate / Equivalent: Monarch GNF-1

Learn More

KHz band ceramic IF filters. Frequency: 450-460KHz. Package: 3 Pin. Learn More

Filter, RF. Radio frequency., A 1314. 50 Ohm, 2Amp 280VAC 60 Hz, 60 CPC. Enclosed. Dimensions: overall 1.5" D x 6.0" long. Note: Alt P/N: B10403-2. Military NSN 5915-00-906-9787. Learn More

DALE - IH10-05  5uH 10Amp 10% Inductors/Coils.

Noise filtering for switching regulators, power amplifiers, power supplies and SCR and TRIAC Control circuits.

DCR = 0.01-OHM

SRF = 30Mhz

1.125" x 0.687" x 0.812" (80 per manuf bx NEW @ $1.00 each piece/$80.00)

Additional Information: https://www.vishay.com/docs/34013/ih.pdf

Learn More

Lot of 10 - LIVINGSTON INDUSTRIAL - MEX/TENTA -MKPX224K275A01 -  XRY MKP X2 Capacitor, AC.

Metalized Polypropylene capacitors have the ability to “repair” themselves. This so-called "self-healing" ability applies when a capacitor with metallized films has the foils exposed to each other due to dielectric breakdown under voltage stress.

Capacitors for Electromagnetic Interference Suppression Class X2

Ratings: 0.22uF 275VAC.

Tolerance: 10%

Radial EMI/RFI Suppression Capacitor.

Material: Non-Inductive Construction, Metallized Polypropylene film with flame retardant plastic case and epoxy resin seal (UL94V-0).

High Pulse Withstanding.

Self-Healing Property.

Excellent High Frequency Characteristics.

Excellent Temperature Characteristics.

Approximate Dimensions; 15.8mm Tall, 25mm leads with 23mm Lead Spacing.

Applications: General Industrial Applications, Antenna-coupling and line-by-pass, Radio and across-the-line interference Suppression, Spark killer circuit, Switching Power Supplies, EMI filters, Audio and TV Circuits, Lighting.

RoHS Compliant.

Alternates: MKP-X2 2.2/275/20 PCM27.5, MPX224K305G

Package of 10.

Learn More

Filter, ultramin. Each with a different MOD Number. Example: MOD: XB4PP150/10. Each with an individual serial number. Mount: PCB. Package: Gold rectangular module, 6 leads, 0.601" long x 0.303" wide x 0.246" high. New. Note: LC Filter. Learn More

On Semi - NUF6410MNT1G - ESD Suppressors, TVS Diodes, , Filter, EMI. 6 Line with ESD protection. 3 Channel Voltage: 5.25 V cD: 55 pF ESD Contact: 8 kV ESD Air Gap: 15 kV Temperature: -55 C to 125 C Termination: SMD/SMT Package: TSOP-6 Case: DFN12 SMD. RoHS Compliant. Learn More

Filter, ultramin. Each with a different MOD Number. Example: MOD: T8B5PP475/50. Each with an individual serial number. Mount: PCB. Package: Metal can 4 leads, 0.147" (3.7mm) long. Note: LC Filter. Maybe used, see description on leads. Learn More