Circuit Protection

NTE Electronics - NTE2V300 - MOV, Metal Oxide Varistor.

280VAC / 370VDC 79 Joules 600mW.

Case: 16mm D disc.

New.

Alternate: ECG2V300.

Mini Circuit Labs - BHP-50 - Coaxial High Pass Filter.

Rugged Shielded Case

50 Ohm 41-800Mhz,

Stop Band, MHz (Loss>40dB) DC-20, (Loss>20dB) 20 - 26

fco Mhz, Nom. (Loss 3dB) 37

Case Style: FF55

BNC Male to BNC Female.

Dimensions: Length 65.79mm, Diameter 13.72mm

Applications: Lab Use, Transmitters/Receivers, Radio communications

New Old Stock

More info: https://www.minicircuits.com/WebStore/dashboard.html?model=BHP-50%2B

Made in USA

TE Connectivity / Corcom - PE0S0DLXC - EMI Filter Power Switch

10A/40ºC, 120/250V, 50-60HZ , Mount - Snap In or Flange Panel, Quick Connect, UL, CSA, VDE Approved,  

Datasheet: http://datasheetz.com/data/Connectors/Power%20Entry%20-%20Modules/PE0S0DLXC-datasheetz.html

Eaton - Cuttler Hammer - Westinghouse - HMCP007C0 - Adjustable 21-70 Amps 3-pole MOTOR CIRCUIT PROTECTOR

• Ranges from 15-2500 amperes
• High‑speed "blow‑open" action
• Available for 600 VAC or 250 VDC systems
• Current ratings up to 2500A
• Outperform calculations listed in IEEE

Motor Circuit Protector; 3 Pole; Series C; K Frame; 600 VAC

480VAC -7Amp Continuous.

Trip Range: 21-70 Amp.

F-Frame.

UPC 786679150719

New Old Stock

TE Connectivity / Potter & Brumfield - W23-X1A1G-40 Circuit Breaker.

W23 Series - Single Pole

Thermal Push/Pull 40 Amp 250VAC

Voltage: 50VDC Max.

Mount: Panel Mount

UL, CSA Approved

Dimensions: See Attached Diagram

New Old Stock

Proudly Made in USA

SIEMENS P&B - W58XA4A12B-20 Circuit breaker.

SP 20Amp 250VAC/50VDC.

Thermal-type.

Single hole mount.

Recessed button can not be pulled out to disconnect circuit.

Continuously carries 100% of rated load.

Dimensions: 1.394" wide x 0.660" deep x 1.381" high, plus threaded bushing 0.292" long.

Contacts: 1/4" quick connect terminals.

SCHAFFNER - FN-372-6 - 6Amp AC Power Line Entry Module / EMI RFI Fused Filter

Schaffner Line Filter 6Amp with Dual Fuse Holders, AN IEC 320 inlet. 2- 0.18mHy 2 x 2200pF,

Panel Mount, Solder Lug, Weight  2 Oz, Max Voltage 250V 50/60 Hz, MTBF @ 40C/230V (Mil-HB-217F) 550,000 hours.

UL, (Fuses purchased separately), 

Input Power: 4 Power Inputs  (100, 120, 220, 240 VAC Drum Selectable)

Connector Style: EC 320-C14        

Connector Type Receptacle, Male Blades - Module              

Current: UL 6A          

Voltage: UL 250VAC Max.

Filter Type: Filtered (EMI, RFI) - Commercial

Accommodates a Fuse Yes (Not Included 20mm x 5mm 6 Amp)

Mounting Type: Panel Mount, Snap-In   

Termination: Quick Connect  

Features: Voltage Selector              

Fuse Holder, Drawer: Fuse Holder, Twin Fused              

Panel Cutout Dimensions: 28.5 x 56mm     

Panel Thickness 0.031" ~ 0.126" (0.79mm ~ 3.20mm)      

Material Flammability Rating: UL94 V-2             

Ingress Protection: IP40      

Approval Agency: CSA, UL, VDE

Made in Switzerland with Germany Components

Alternates: Mouser 631-FN372-6-21, Digi-Key 817-1170-ND, Newark 11B3185

Typical Uses - Electrical Equipment, Consumer goods, EDP and office equipment, Single-phase Power supplies, Switch mode power supplies, Test and measurement equipment, & medical equipment.

Schaffner - 1FN610-6/06 Filter, line.

6Amp 110/250VAC 50/60Hz/HPF (2 x 0.75mH).

Operating Frequency: DC to 400 Hz

Enclosed.

Operating Temperature: -25 to +85 C.

Dimensions: 1.313" long x 1.746" deep x 0.75" high, with 1/4" male QC terminals.

Alternate: FN2010-6-06

SATO PARTS - F-7135 Fuse Block.

F-7135 is a 250-V, 20-A Fuse Holder. A safe and reliable product made in Japan.

Insulation Resistance (MΩ): 100 or more (DC500V)

Number of Poles: 1Pole

Rating: 250V-20A

Withstand Voltage: AC 1500V (1 minute)

Type: Horizontal Type

Heavy Duty

Material (Insulator): Phenolic (UL94V-0)

Applicable Standard: RoHS compliant

Color (Body): Black

Applicable Fuse Tube Size (mm): Φ10.31×38.1mm (0.40" X 1.5")

Connections: Two Quick Connect.

Dimensions: 2-1/4" long x 13/16" deep x 1-1/8" tall.

Made in Japan

Alternate: F-200-N

SCHAFFNER - FN372-2/A - Filter, Power Entry Module.

The FN 370 power entry module combines an IEC inlet, a mains filter with a single or dual- fuse holder
and a voltage selector. Choosing FN 370 product line brings you the rapid availability of a standard filter
associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution
helping you to pass EMI system approval in a short time.

Connector Style: IEC 320-C14

Connector Type: Receptacle, Male Blades - Module

Current – UL: 2A

Voltage – UL: 12.5/250VAC

Filter Type: Filtered (EMI, RFI) - Commercial

Accommodates a Fuse: Yes

Number of Positions: 3

Mounting Type: Panel Mount, Snap-In

Termination: Quick Connect

Panel Thickness: 0.031" ~ 0.126" (0.79mm ~ 3.20mm)

Material Flammability Rating: UL94 V-2

Ingress Protection: IP40

Approval Agency: CSA, UL, VDE

Applications: Portable electrical and electronic equipment,Consumer goods,EDP and office equipment
Single-phase power supplies, switch-mode power,supplies,Test and measurement equipment Medical equipment. 

Made in Switzerland & Germany

SCHAFFNER EMC - FN 363-4/01 Filter.

Voltage/Current Ratings: 4Amp 110/250 50/60Hz Single Phase 3 Prong.

Filter: HPF 4A. 0.047uF(X2)SH 2x00.48mH. 400uH 2 x 2200pF(Y).

Max. voltage: 250 VAC

Fuse Protection

Termination Method: Spade/Solder

Number of Contacts: 3 Prong Plug

Mounting: Flange

Gender: Male

Operating Temp.: -25 to 85 C

With AC Power Outlet.

Made in Switzerland

New Old Stock

Applications: Instrumentation, Test Equipment, Computers, Switching Power Supplies, Motor Controllers, PWM Circuits, Induction Cooking, Commercial, Medical, Industrial.

Potter & Brumfield - W69X2Q1-2-30 Circuit breakers.

3P 30Amp 277VAC 50/60Hz.

Curve 2.

Mount: Panel, 4 holes at approximately 2.224" centers.

Dimensions: 2.228" long x 2.006" high x 1.513" deep, plus terminals.

Male 1/4" QC terminals.

Listed: UL/CSA.

TE Connectivity/AMP - Potter & Brumfield - 2-1393253-4 - W68-X2Q110-30 Circuit breaker.

Dual 30Amp 2-Pole 277VAC-max, 50/60Hz. Curve 10.

Type: Magnetic (Hydraulic Delay)

Mount: Panel.

Four hole mount: 2 top screw distance: 0.750" (19.05m) and distance between top and bottom screw: 1.660" (42.16mm).

Dimensions: Overall 1.500" (38.1mm) wide x 2.016" (51.2mm) Height x 1.640" (41.66mm) deep.

Listed: UL/CSA.

TDK Lambda - L-12-OV-5 Overvoltage Protection.

12 A 30 Volt 1.0% range: 33.5Volts +/- 1V.  A temperature compensating hybrid circuit that resets itself when normal conditions resume.

Temperature Compensated Trip Point

Suitable for any Current Rated Device

No Additional Components Required

Mount: Flange Mount

12Amp 5V Hybrid Device

Trip 6.6V, +/-0.3V.

Case: PCB Mount 1.5" x 0.750" base x 0.676" tall with 1.168" mounting centers.

Genuine TDK Lambda - New Old Stock

E-T-A (ETA) - 45-000-P-H - 2.5 Amp Circuit Breaker. SP 2.5Amp 250VAC

SP 2.5Amp 250VAC.

With reset button.

Mount: 2 hole panel, front flange 49.9mm long x 17.9mm wide and 40.0mm centers.

Dimensions: 31.2mm wide x 14.0mm x 49.5mm behind panel.

Contacts: (2) 1/4" male quick connect terminals.

Listed: UL/CSA.

Made in Germany

CUTLER-HAMMER - HMCP400W5W Circuit Breaker.

3 Pole 400Amp 600VAC/250VDC.

Family: Series C,  Nema Type 3, Molded Case.

Phase: 3

Poles: Three - Pole Magnetic Trip

Voltage: 600

Amperage: 400

Connection: Bolt-On

Protection: Magnetic Only

Functions: I - Instantaneous

AIC Rating: 35kA@480V

Frame Size: K Frame

Magnetic Trip Range : 1250-2500 Amp.

Motor Protector. - Approvals: UL, CSA

Dimensions: Height 10.13" X Length 4.1" X Width 5.5"

Weight: 11 Lb 5 Oz

Used / Removed From Equipment

Note: Difficult to find Item 

Made in USA

TE Connectivity / AMP / CORCOM - 20ESK6, F7585 Filter, AC Line.

SK Series, Status: Active

EMI & RFI 20 Amp 120/250V 50/60Hz, 10kHz-30MHz SEV VDE UL544.

Low Leakage

Operating Temperature: -10C to 40C

Inductance: 0.06 mH  

Housing: Chrome.

Mount style: Flange 2-holes 4.0"spacing.

Connections: Threaded Bolts 8-32 Torque 18lbf-in (2.03 M-m) Max.

UPC: 061068421787

Alternate: 20ESK6, F7585 S0, AMP 1-6609035-3

Dimensions: 5.09" Long x 2.25" Wide x 1.78" High, with Stud Contacts.

Each is Test Dotted.

Weight: 1.2 lbs without packaging.

Application: Electro-Mechanical Noise, Switching Power Supplies.

RoHS Compliant.

Factory New

CLARE - CM3P-350L Gas Tube Arrestor.

DC Breakdown Voltage: 350V.

Tolerance: 20%.

Transient Protector.

Impulse Breakdown Voltage: 1200V max.

Capacitance: 2pF max.

Material: Ceramic tube sealed at both by electrodes, and inside it is filled by inert gas.

Package: 3 radial leads.

Lead spacing: 6mm.

EATON - COOPER BUSSMANN - 1B0024 - Now H60030-1S - Fuse Holders.

One (1P) Single Cartridge Fuse Holder, 30Amp 600V.

Wire Connector Style: Screw with Clip.

Material: Thermoplastic.

Construction Size: UL Class K5

Breaking Capacity: 10kA

Wire size leads: #10 - #8 (10 & 8 AWG)

Dimensions: 6.25in.(L) 1.54in.(W) 1.73in.(H).

Max. Rating: 200,000 RMS

Alternate:  R60030-1SR.

Approvals: CE, UL Listed, CSA

New Old Stock

Proudly Made in USA

Sensata AIRPAX - 209-3-22848 - Circuit Breaker.

3Pole 60Amp 240VAC 50/60Hz.

Special Purpose not for general use.

Back Connected Stud Terminal.

Mount: Panel, Each Individual Breaker has 2 Mount Holes.

Overall Centers is approximately 3.5".

Dimensions: 3.1" wide x 5.125" high x 3.55" deep.

Note: T29-467.

Issue LN-1233.

New.

Sensata Airpax - 209-2-6467-4 - Circuit Breaker.

2Pole 240VAC 75Amp.

Mount: Panel.

Dimensions: Overall 2.072" wide x 3.55" deep x 5.125" high.

Use on Vertical Surface.

Marked for Special Use Only.

New.

AIRPAX - UPL211-1REC2-8966-1 Circuit breakers.

3 Pole 400Hz 8 Amp F.L., T.A.12

250VAC 400 cycle, delay 41,

AUX switch 10A-250VAC,

AUX coil 12VDC.

Additional Data: https://www.sensata.com/sites/default/files/media/documents/2018-04-26/ourproducts_apl_upl_series_datasheet.pdf

Sensata Airpax - PP11-62F-2.00A-24458-2-V

Hydraulic Magnetic Circuit Protectors (SNAPAK®)

2Amp Push - Pull Circuit Breakers

Single Pole

Switch Trip/Amp 2.00 Ampere

250VAC 50/60Hz

Frequency & Delay: Slow 50/60 Hz

(2) 1/4" male QC mounting and dress nut included

 0.680" x 1.375" x 1.960" behind panel

Weight 1.0 oz 

Highly Discounbted - New Old Stock

Additional Information: https://datasheet.octopart.com/PP11-62F-2.00A-24458-2-V-Sensata---Airpax-datasheet-68313446.pdf

Alternate: TE Connectivity W23-X1A1G-2

Proudly Made in USA

E-T-A - ETA - 1658-A00-00-P10-20A - Circuit Breaker. Type 1658, 20Amp 120/125VAC, 28VDC, Self Resetting.

Series: 1658       

Type: Thermal Overcurrent        

Current Rating: 20 A      

Voltage Rating AC: 120/125 VAC        

Voltage Rating DC: 28 VDC          

Number of Poles: 1 Pole

Actuator Type: Self-Reset            

Operating Temperature: - 20 C to + 60 C

Dimensions: Height: 14 mm, Length: 27 mm, Width: 32 mm        

Mounting Style: Panel Mount    

Termination Style: Blade     

Unit Weight: 1.304431 oz

Approvals: CSA C22.2 No 235, IEC 60934, UL1077, UL1500