Circuit Protection
- SIEMENS - 3VF4231-1DF41-7KA0 - 3-Ph 125A Adj Thermal Magnetic Circuit Breaker$379.00Out of stock3VF & Meter #3VF4231-1DF41-7KA0 50/60Hz 415V/40/40kA 690V 14/7 Excellent Condition - UL-E167267 CSA-LR44511 VDE-0660 IEC-947-2 Trip Thermal Magnetic Circuit Breaker Learn More
- Mini Circuit Labs - BHP-50 - Coaxial High Pass Filter. 41 to 800 MHz, 50 Ohm.
Mini Circuit Labs - BHP-50 - Coaxial High Pass Filter.
Rugged Shielded Case
50 Ohm 41-800Mhz,
Stop Band, MHz (Loss>40dB) DC-20, (Loss>20dB) 20 - 26
fco Mhz, Nom. (Loss 3dB) 37
Case Style: FF55
BNC Male to BNC Female.
Dimensions: Length 65.79mm, Diameter 13.72mm
Applications: Lab Use, Transmitters/Receivers, Radio communications
New Old Stock
More info: https://www.minicircuits.com/WebStore/dashboard.html?model=BHP-50%2B
Made in USA
Learn More - TE Connectivity Potter & Brumfield - W23-X1A1G-40 - Circuit Breaker. Thermal Push/Pull 40 Amp. 240VAC, 50VDC Panel MountREADY TO SHIP - ONLY 62 LEFT IN STOCK!
TE Connectivity / Potter & Brumfield - W23-X1A1G-40 Circuit Breaker.
W23 Series - Single Pole
Thermal Push/Pull 40 Amp 250VAC
Voltage: 50VDC Max.
Mount: Panel Mount
UL, CSA Approved
Dimensions: See Attached Diagram
New Old Stock
Proudly Made in USA
Learn More - SIEMENS/P&B - W58XB1A4A-1.50 - Circuit breaker. 1.5Amp 250VAC / 50VDC.$4.95Out of stock
Circuit breaker. 1.5Amp 250VAC / 50VDC with recessed button that can not be pulled out to disconnect circuit - 10-45 second trip time - Carries 100% of rated current, 1/4" QC Terminals.
Learn More - SIEMENS P&B - W58XA4A12B-20 - Circuit breaker. SP 20Amp 250VAC/50VDC.IN STOCK - MORE THAN 100 READY TO SHIP!
SIEMENS P&B - W58XA4A12B-20 Circuit breaker.
SP 20Amp 250VAC/50VDC.
Thermal-type.
Single hole mount.
Recessed button can not be pulled out to disconnect circuit.
Continuously carries 100% of rated load.
Dimensions: 1.394" wide x 0.660" deep x 1.381" high, plus threaded bushing 0.292" long.
Contacts: 1/4" quick connect terminals.
Learn More - SCHAFFNER - FN-372-6-21 - AC Power Line Entry Module / EMI RFI Fused Filter, 6 AmpIN STOCK - MORE THAN 100 READY TO SHIP!
SCHAFFNER - FN-372-6 - 6Amp AC Power Line Entry Module / EMI RFI Fused Filter
Schaffner Line Filter 6Amp with Dual Fuse Holders, AN IEC 320 inlet. 2- 0.18mHy 2 x 2200pF,
Panel Mount, Solder Lug, Weight 2 Oz, Max Voltage 250V 50/60 Hz, MTBF @ 40C/230V (Mil-HB-217F) 550,000 hours.
UL, (Fuses purchased separately),
Input Power: 4 Power Inputs (100, 120, 220, 240 VAC Drum Selectable)
Connector Style: EC 320-C14
Connector Type Receptacle, Male Blades - Module
Current: UL 6A
Voltage: UL 250VAC Max.
Filter Type: Filtered (EMI, RFI) - Commercial
Accommodates a Fuse Yes (Not Included 20mm x 5mm 6 Amp)
Mounting Type: Panel Mount, Snap-In
Termination: Quick Connect
Features: Voltage Selector
Fuse Holder, Drawer: Fuse Holder, Twin Fused
Panel Cutout Dimensions: 28.5 x 56mm
Panel Thickness 0.031" ~ 0.126" (0.79mm ~ 3.20mm)
Material Flammability Rating: UL94 V-2
Ingress Protection: IP40
Approval Agency: CSA, UL, VDE
Made in Switzerland with Germany Components
Alternates: Mouser 631-FN372-6-21, Digi-Key 817-1170-ND, Newark 11B3185
Typical Uses - Electrical Equipment, Consumer goods, EDP and office equipment, Single-phase Power supplies, Switch mode power supplies, Test and measurement equipment, & medical equipment.
Learn More - SATO PARTS - F-7135 - Fuse Block. Holders 20Amp 250V.
SATO PARTS - F-7135 Fuse Block.
F-7135 is a 250-V, 20-A Fuse Holder. A safe and reliable product made in Japan.
Insulation Resistance (MΩ): 100 or more (DC500V)
Number of Poles: 1Pole
Rating: 250V-20A
Withstand Voltage: AC 1500V (1 minute)
Type: Horizontal Type
Heavy Duty
Material (Insulator): Phenolic (UL94V-0)
Applicable Standard: RoHS compliant
Color (Body): Black
Applicable Fuse Tube Size (mm): Φ10.31×38.1mm (0.40" X 1.5")
Connections: Two Quick Connect.
Dimensions: 2-1/4" long x 13/16" deep x 1-1/8" tall.
Made in Japan
Alternate: F-200-N
Learn More - SCHAFFNER - EMC - FN 363-4/01 - Filter. 4Amp Single Phase 3 Prong, 110/250 50/60Hz.IN STOCK - MORE THAN 100 READY TO SHIP!
SCHAFFNER EMC - FN 363-4/01 Filter.
Voltage/Current Ratings: 4Amp 110/250 50/60Hz Single Phase 3 Prong.
Filter: HPF 4A. 0.047uF(X2)SH 2x00.48mH. 400uH 2 x 2200pF(Y).
Max. voltage: 250 VAC
Fuse Protection
Termination Method: Spade/Solder
Number of Contacts: 3 Prong Plug
Mounting: Flange
Gender: Male
Operating Temp.: -25 to 85 C
With AC Power Outlet.
Made in Switzerland
New Old Stock
Applications: Instrumentation, Test Equipment, Computers, Switching Power Supplies, Motor Controllers, PWM Circuits, Induction Cooking, Commercial, Medical, Industrial.
Learn More - Heinemann / Eaton - AM1-Z204-64 - Circuit breaker. SP 5.5Amp 65VDC.Special Price $3.67 Regular Price $4.89Circuit breaker. SP 5.5Amp 65VDC. Trip amp: 6.87Amp. Auxiliary switch: 5Amp 250VAC. Note: Double marked: AM1-B1-A. Learn More
- Heinemann / Eaton - JC2S-A3-LJ-01-W-A-PN - Circuit breaker. 2P 15Amp 250VAC.$25.00READY TO SHIP - ONLY 35 LEFT IN STOCK!
Circuit breaker. 2P 15Amp 250VAC. Delay: 2. Mount: panel.
Learn More - Heinemann / Eaton - JB1-A3-A - Circuit breaker. SP 0.5Amp 250VAC.Special Price $8.98 Regular Price $16.95Heinemann / Eaton - JB1-A3-A - Circuit Breaker. SP 0.5Amp 250VAC. JB Snap-In Mount Series, Toggle. Trip amp: 0.625Amp. Delay: 3. Mount: panel, snap-in. Dimensions: 0.761" wide x 2.65" (actual 2.012") high, behind panel. Listed: UL/CSA. J Series can be used in a wide variety of applications including telecom, rail, marine and mobile equipment. These breakers are small and lightweight, saving valuable space in crowded control panels or weight in portable equipment. Status: Discontinued, New Old Stock. Learn More
- Heinemann / Eaton - AM3SD3-A-0015-03E - Circuit breaker. 3P 15A 250VAC.Special Price $49.95 Regular Price $65.00Circuit breaker. 3P 250VAC/65VDC. Trip amp: 20.3Amp. Delay: 3. Learn More
- E-T-A - ETA - 41-04-PR-6.0A - Thermal Overcurrent Circuit Breakers. 250VAC 6Amp.IN STOCK - MORE THAN 1,000 READY TO SHIP!
E-T-A - ETA - 41-04-PR-6.0A - Thermal Overcurrent Circuit Breakers. 250VAC / 48 VDC 6Amp.
Circuit Breakers Miniaturised single pole thermal circuit breaker with push-to-reset tease free, trip-free, snap action mechanism (R-type TO CBE to EN 60934) for PCB mounting. Approved to CBE standard EN 60934 (IEC 60934).
Status: Discontinued
Thermal Overcurrent Circuit Breakers, 1 Pole.
Solder Terminal Pins for PCB Mount
Max. Voltage: 250VAC / 48VDC
Current Rating: 6Amp.
Internal Resistance: =/< 0.05 ohm
Insulation Resistance: > 100 MΩ (DC 500 V)
Actuator Type: Button
Mount: PCB.
Dimensions: 0.75" Wide x 0.44" High x 1.6" Deep Overall. (27.6mm X 11mm X 19.2mm)
Applications: Motors, transformers, solenoids, printed circuit boards, hand-held machines and appliances, marine applications, caravans.
Approvals: UL CSA
New Old Stock
- ECS INC - ZTA-3.58MG - Ceramic Resonator 3.58MHz. Package of 10.
ECS INC - ZTA-3.58MG - Filter/Resonator.
Ceramic Resonator 3.58MHz,
Impedance: 30 Ohm. Tolerance: 0.5%.
Supply Voltage: 100V
Dimensions: 10mm wide x 5mm deep x 7.5mm High.
Package: 2 Pin Radial Leads.
Lead Spacing: 5mm.
Note: Extended Temperature Range.
Additional Information: https://ecsxtal.com/store/pdf/ZTAR.pdf
Package of 10.
- E-T-A - 45-000-P-H - 2.5 Amp Circuit Breaker. SP 2.5Amp 250VAC.IN STOCK - MORE THAN 100 READY TO SHIP!
E-T-A (ETA) - 45-000-P-H - 2.5 Amp Circuit Breaker. SP 2.5Amp 250VAC
SP 2.5Amp 250VAC.
With reset button.
Mount: 2 hole panel, front flange 49.9mm long x 17.9mm wide and 40.0mm centers.
Dimensions: 31.2mm wide x 14.0mm x 49.5mm behind panel.
Contacts: (2) 1/4" male quick connect terminals.
Listed: UL/CSA.
Made in Germany
Learn More - CORNELL DUBILIER - IF-24 "QUIETONE" - 277V AC/DC QUIETONE NO PCB'S 60HZ W/2-8" LEADS ($2.50277V AC/DC QUIETONE NO PCB'S 60HZ WITH (2) 8 INCH LEADS Learn More
- TE Connectivity / AMP / CORCOM - 20ESK6, F7585 - Filter, AC Line. EMI & RFI 20Amp 120/250V 50/60Hz.READY TO SHIP - ONLY 79 LEFT IN STOCK!
TE Connectivity / AMP / CORCOM - 20ESK6, F7585 Filter, AC Line.
SK Series, Status: Active
EMI & RFI 20 Amp 120/250V 50/60Hz, 10kHz-30MHz SEV VDE UL544.
Low Leakage
Operating Temperature: -10C to 40C
Inductance: 0.06 mH
Housing: Chrome.
Mount style: Flange 2-holes 4.0"spacing.
Connections: Threaded Bolts 8-32 Torque 18lbf-in (2.03 M-m) Max.
UPC: 061068421787
Alternate: 20ESK6, F7585 S0, AMP 1-6609035-3
Dimensions: 5.09" Long x 2.25" Wide x 1.78" High, with Stud Contacts.
Each is Test Dotted.
Weight: 1.2 lbs without packaging.
Application: Electro-Mechanical Noise, Switching Power Supplies.
RoHS Compliant.
Factory New
Learn More - EATON COOPER BUSSMANN - 1B0024 - Now H60030-1S - Fuse Block, 600V 30Amp.
EATON - COOPER BUSSMANN - 1B0024 - Now H60030-1S - Fuse Holders.
One (1P) Single Cartridge Fuse Holder, 30Amp 600V.
Wire Connector Style: Screw with Clip.
Material: Thermoplastic.
Construction Size: UL Class K5
Breaking Capacity: 10kA
Wire size leads: #10 - #8 (10 & 8 AWG)
Dimensions: 6.25in.(L) 1.54in.(W) 1.73in.(H).
Max. Rating: 200,000 RMS
Alternate: R60030-1SR.
Approvals: CE, UL Listed, CSA
New Old Stock
Proudly Made in USA
- AIRPAX - UPL211-1REC2-8966-1 - Circuit breakers. 3 Pole 400Hz 8 Amp.Special Price $39.98 Regular Price $68.50READY TO SHIP - ONLY 23 LEFT IN STOCK!
AIRPAX - UPL211-1REC2-8966-1 Circuit breakers.
3 Pole 400Hz 8 Amp F.L., T.A.12
250VAC 400 cycle, delay 41,
AUX switch 10A-250VAC,
AUX coil 12VDC.
Additional Data: https://www.sensata.com/sites/default/files/media/documents/2018-04-26/ourproducts_apl_upl_series_datasheet.pdf
Learn More - Sensata Airpax - PP11-62F-2.00A-24458-2-V - 2Amp Push-Pull Circuit BreakersIN STOCK - MORE THAN 1,000 READY TO SHIP!
Sensata Airpax - PP11-62F-2.00A-24458-2-V
Hydraulic Magnetic Circuit Protectors (SNAPAK®)
2Amp Push - Pull Circuit Breakers
Single Pole
Switch Trip/Amp 2.00 Ampere
250VAC 50/60Hz
Frequency & Delay: Slow 50/60 Hz
(2) 1/4" male QC mounting and dress nut included
0.680" x 1.375" x 1.960" behind panel
Weight 1.0 oz
Highly Discounbted - New Old Stock
Additional Information: https://datasheet.octopart.com/PP11-62F-2.00A-24458-2-V-Sensata---Airpax-datasheet-68313446.pdf
Alternate: TE Connectivity W23-X1A1G-2
Proudly Made in USA
Learn More - E-T-A - ETA - 1658-A00-00-P10-20A - Circuit Breaker. Type 1658, 20Amp 120/125VAC, 28VDC, Self Resetting.READY TO SHIP - ONLY 65 LEFT IN STOCK!
E-T-A - ETA - 1658-A00-00-P10-20A - Circuit Breaker. Type 1658, 20Amp 120/125VAC, 28VDC, Self Resetting.
Series: 1658
Type: Thermal Overcurrent
Current Rating: 20 A
Voltage Rating AC: 120/125 VAC
Voltage Rating DC: 28 VDC
Number of Poles: 1 Pole
Actuator Type: Self-Reset
Operating Temperature: - 20 C to + 60 C
Dimensions: Height: 14 mm, Length: 27 mm, Width: 32 mm
Mounting Style: Panel Mount
Termination Style: Blade
Unit Weight: 1.304431 oz
Approvals: CSA C22.2 No 235, IEC 60934, UL1077, UL1500
- Busman - 8-013 - S8000 Series - Fuse Block, 8-Position
Busman - 8-013 - S8000 Series - Fuse Block, 8-Position
They're used with glass fuses for protecting low-current circuits or ceramic fuses for protecting high-current circuits. These blocks have an open top for access to fuses, clips for securing fuses within the block, and terminals for connecting to the circuit. Their one-piece clip-and-terminal design is compact to save installation space. They bolt into place for a secure hold.
8-Pole/Fuse Capability.
Fuse blocks for (8) Eight 3AG Series Glass for 8 3AG and similar Glass/Ceramic Fuses.
Fuse Compatibility: 311, 312, 313, 314, 315, 322, 326, 3AG, ABC, ACG, GAB, GBB, GDL, GDV, GGC, GSA, MDA, MDL, MDQ, MDV, MDX, MMB
Voltage/Current Ratings: 300 VDC/VAC / 25Amp
1/4" (0.25") X 1.250" Fuses (6.3mm X 32mm).
Mount: Chassis Mount
Quick Connect Terminals on a Black Bakelite (Phenolic) Board.
Dimensions: Base is 124.4mm (4.9") x 41.2mm (1.624") x 5.1mm (0.204") high.
(The contacts extend outward giving the overall dimensions 2.130" wide x 0.725" high).
Custom Customer Order - Having Fuse Identification Markings: XF1 thru XF8
Vintage Bussman - New Old Stock
UL Recognized, CSA Certified
Note: Heavily Disconted due to some having slight age related corrosion on base metal.
Alternate: BK/S-8001-8
Learn More - Littelfuse - 101-001 - Rivet / Eyelet Mount Fuse Clips For 1/4" 3AG Fuses, Package of 50$4.98
Littelfuse- 101-001 - Rivet / Eyelet Mount Fuse Clips For 1/4" 3AG Fuses.
Body Material: Brass, Nickel Plated
Mount: PCB Chassis Mount
Current Rating: 15 A
Voltage: 250 V
Voltage Rating: 600 V
RoHS: Compliant
New Old Stock
Package of 50
Learn More - Littlefuse - 02810005H - 4-466 - Micro Fuse Holder pcb mt - Package of 10IN STOCK - MORE THAN 5,000 READY TO SHIP!
Littlefuse - 02810005H Micro Fuse Holder, Package of 10.
Body Material: Thermoplastic
Case/Package: Radial
Color: White
Contact Material: Copper, Silver
Contact Plating: Silver
Number of Pins: 2
Current Rating:5 A
Operating Temperature: 40 C to 100 °C
Packaging: Bulk
Termination: PC Pin
Voltage Rating: 125 VDC/VAC
Dimensions: Diameter 6.35 mm X Height 6.6548 mm X Length 8.13 mm
Compliance: Approvals UL
UPC 013227543120
New Old Stock
Package of 10
Learn More