Circuit Protection
- LITTELFUSE - 371001A - Fuse Holder, Extractor Post, 15A, 250VREADY TO SHIP - ONLY 80 LEFT IN STOCK!
LITTELFUSE - 371001A - Fuse Holder, Extractor Post
Terminal Material: Brass
Contact Material: Beryllium Copper
Body Material: Molded Plastic, Phenolic
Voltage: 250 V
Current Rating: 10 A
Fuse Type: 3AG, 3AB
Mount: Panel Mount, Screw Slot
Accomodate Fuse Length: 1.00"
Bushing Diameter: 0.500"
Overall Dimensions: L 2.125" X W 0.813"
Alternates: 41 B 720, 1087S, 371001, 40507057ALT8PC42, 40-507-057ALT8PC42, 40507064ALT11PC42, 40-507-064ALT11PC42, 40705782ALT2PC58, 40-705-782ALT2PC58, 6505925918ALT1PC58, 6505-925918ALT1PC58, 65X106488, 5920-00-228-4432, 00-228-4432, 5920002284432, 002284432
NSN: 5920-00-228-4432
Genuine Vintage Littelfuse - New Old Stock
Applications: Instrumentation, Generator Sets, Commercial, Military.
Learn More - LITTELFUSE - 345701A - 03450701H - Fuse Holder, 345 Series Panel Mount Enclosed Fuse Holder. 3AG. 5X20, 2AG Fuses, 10Amp 600VACIN STOCK - MORE THAN 1,000 READY TO SHIP!
LITTELFUSE - 345701A - 03450701H - Fuse Holder
Type: Safe Shock
Mount: Panel Mount - 1 Pole
Fuse Holder, 345 Series Panel Mount Enclosed Fuse Holder, ''Shock-Safe''
Electrical Rating: 20Amp 600VAC
High Profile Screwdriver Head
Right Angle Bottom Terminal
Bottom Terminal is 1/4" Quick Connect
Contact MaTERIAL: bRASS, tIN pLATED
3AG Black Body.
Temperature: -40 C to 85 C
Accepts 3AG, 5 x 20mm, and 2AG fuse sizes
Red Screwdriver Slot Cap (Flush with Holder) with slotted cap, no retaining nut.
Note: 1/2" Plastic Hex Nut with flange Purchased Separately
Alternate 03450701H, 3453HS7-010
- SANKEN - TNR15G560KM - MOV. Metal Oxide Varistor, Radial 15mm. Package of 10.
SANKEN Marcon - TNR15G560KM - MOV, Metal Oxide Varistor.
High Performance TNR G (M) Series
Applied Voltage Continuous: 35VAC, 45VDC.
Varistor Voltage: 56V.
Joules: 10.
Clamping voltage: 103V, 10A.
Capacitance: 5,600pF.
Package: Radial Leads, 14mm.
Mount Type: Through Hole Mount Disk Package
Alternate: GE V56ZA8, Littelfuse V56ZA8P, Multicomp MCV560K14DS
Package of 10.
- ONEIDA - IL-039 - Single Unit Fuse Holder for 10A 250VAC 3AG 1/4" fuses.Out of stock
ONEIDA - IL-039 - Hardware, Fuse Holder.
Single unit Fuse Holder for 10A 250VAC 3AG 1/4" fuses.
Material: Molded thermoplastic.
EZ-mount.
Mount: PCB. Dimensions: 48mm long x 14.mm wide and overall 23.2mm tall.
Note: Oneida / Sato parts.
Alternate: Littelfuse 03540001ZXGY
Learn More - General Electric - SEHA36AT0100 - Circuit breaker. 3P 100A 400VAC.$400.00Circuit breaker. 3P 100A 400VAC. Rating plug type: SRPE100A. Mounted on a galvanized panel 5.7" wide. Dimensions: actual 4-1/8" wide x 6-7/16" deep x 4-1/16" high. Listed: UL/CSA. Learn More
- CKE - Z15L560 - MOV, Metal Oxide Varistor, 0.1 Watt 56V.IN STOCK - MORE THAN 500 READY TO SHIP!
CKE - Z15L560 - MOV, Metal Oxide Varistor. Surge Suppressor.
56V 0.1 Watt 10 Joules (35VAC/45VDC).
Clamping Voltage: 110V.
Clamping Current: 10 A
Capacitance: 4500pF.
Package: Radial Disc.
Item Number: Z15L560
Brand: CKE
Item Category: Metal Oxide Varistors
Subcategory: Radial Lead
Series: L
Max Applied Voltage RMS: 35 Volts AC
Max Applied Voltage DC: 45 Volts DC
Energy (Joules): 10 Joules
Varistor Volts @ 1ma DC:56 (50-62)
Max Clamping Volts: 105 Volts
Max Clamping Volts-Amps: 10 Amps
Peak Current (Amps): 1,000 Amps
Operating Temperature: -55 C to 125 C
Typical Capacitance (pf): 4,500 PicoFarads
Picture No.: CKE_MOV_L67
Marking on Part: Z15L560
Lead Spacing: 0.3 Inches
Lead Diameter: 0.031 Inches
H x W x D:.67 in x .67 in x .16 in
- NTE Electronics Inc. - NTE1V035 - MOV, metal oxide varistor.$3.00MOV, metal oxide varistor. 35VAC 45VDC. 2.7 Joules. Dissipation: 250mW. Operating temperature: -40 to 85 Deg C. Package: 8.5mm radial leads. Note: Cross ECG1V035. Learn More
- General Electric - GE8431-3 - Fuse Holder. 3 Pole 1-30Amp 250VAC.$16.95 As low as $12.98IN STOCK - MORE THAN 100 READY TO SHIP!
General Electric - GE8431-3 - Fuse holder. 3 Pole 1-30Amp 250VAC.
Status: Discontinued
Body Style: Side barrier type
Terminal Material: Brass
Terminal Surface Treatment: Nickel plated
Overall Height: 1.375 inches
Overall Width: 3.125 inches
Mounting Hole Diameter: 0.219 inches
Mounting Hole Quantity: 2
Base Thickness: 0.375 inches
Mounting Hole Style: In-line along the length
Contact Material: Beryllium copper
Contact Surface Treatment: Any acceptable
Fuse Accommodation Quantity: 3
Accommodated Fuse Length: 1.250 inches
Accommodated Ferrule Diameter: 0.250 inches
Center To Center Distance Between Outside Mounting Holes Along Length: 2.500 inches
Current Carrying Rating In Amps: 30.0
Internal Circuit Configuration And Pole Quantity: 3 pole, mainline, fused
Fuse Terminal Type Accommodated: Ferrule
Voltage In Volts: 250.0
Made in the USA.
Alternates: 2400-105, 66U1-2531-3, F30A3, F30A35, F30A3S
NSN 5920-00-177-1972
Learn More - Eaton Cooper/Bussmann - HTC-50M - Fuse holder. 6.3Amp 250VAC, 2.5 watt.READY TO SHIP - ONLY 36 LEFT IN STOCK!
Eaton Cooper/Bussmann - HTC-50M Fuse holder.
6.3Amp 250VAC, 2.5 watt.
Mount: PCB, PC Pins, Horizontal.
2 Part, For 5 x 20mm Fuse.
Solerability: In accordance with IEC 68-2-20
Molded materials: UL94 V-0
Lead Free.
RoHS Compliant.
Alternates: Newark 84Y5906, H15
Learn More