Battery Connector

Keystone Electronics - 5-428 - Battery Accessories.

"AA" battery clip.

Material: Nickel Plated Spring Steel.

Single ended. Three mounting holes.

One solder tab.

Dimensions: 0.7" long x 0.54" wide x 0.6" high.

Alternate: Digi-Key 36-99-ND

C-Cell Battery Bay or Charging Holder for Six C Size Batteries

Battery Holder, for Six "C" Cells.

Configuration: 1.5 VDC  X 6 Batterys in Series = 9 VDC

Batteries are securely clamped in place by the holder.

Dimensions: 2.25" x 6.25"L.

Color: Black

Connections: With  Two Wire (Red & Black) 8" leads & Connector.

Made in Taiwan

Applications: Widely used in the toy, lamp, other projects or use as a perfect external power source

MDP Battery Accessory.

Holder for two D or UM-1 cells. Side by side.

Connection: Solder Lugs

Mount: Chassis Mount

Dimensions: Approx. 70 X 70 X 30 mm

Material: Plastic. 

Operating Temperature: -10C to 100C

Applications: For Soldering /Connecting. can be used as a perfect external power source

Alternate: BH2DL, BH121B

Keystone Electronics - 184 - 30 Volt Battery Holder, Aluminum New

An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Recommended for use where shock or severe vibration is encountered. 

Clips: Spring Steel, Nickel Plate

Phenolic Base: Type PBE, Per MIL-P-3115C

Contact Eyelets: Brass, Nickel Plate

Frame and Clips: Aluminum 2024-T3

Insulating Washers: Moisture Proof, Resin Impregnated Fibre

Solder Lugs: Brass, Tin Plate

Numer of Cells: 2

Mounting Type: Chassis Mount

Termination Style: Solder Lugs

Battery Cell Size: 2/3A

Battery Holder Dimensions: See Attached Illustration.

Two mounting holes on Bottom 1.912" Spacing.

Chassis Mount.

Solder Lug Terminals.

Heavy Duty - New Old Stock.

Made in USA

Battery Cross Reference: Eveready 413, NEDA 210 

Alternates: Digi-Key 36-184-ND, Mouser 534-184, Newark 35F1638

Keystone Electronics - 2173 - Rugget Steel Battery Holder, Cylindrical.

An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Retainer clips are available to lock batteries in place and prevent shifting or loosening. Recommended for use where shock or severe vibration is encountered. 

• Ideal for NiCd, Alkaline, NiMH, Carbon, Zinc and Lithium Cells
• Corrosion Resistant, Nickel Plate
• Brass Contacts, Nickel Plate
• Moisture Proof Resin Impregnated, Fibre Insulating Washers

Single "C" Cell Battery Holders

Battery Cross Reference ICE LR14, ANSI/NEDA 14A

Battery Dimensions: Diameter 0.531"- 0.565" X Length 1.906" - 1.988" (13.4-14.5mm X 48.4-50.5mm)

2100 Series with Insulated Contacts from Metal Housing.

Two mounting holes on Bottom 1.34" Spacing.

Chassis Mount.

Solder Lug Terminals.

Heavy Duty - New Old Stock.

Alternates: Digi-Key 36-2173-ND, 2224, 36-224-ND

BPI - 11-420 - Battery Tester.

Batteries and accessories.

1.5V. Metal bracket with a 1.5V light bulb.

Vintage New Old Stock

Proudly Made in USA

EMERSON - OBC02 - NI-CD Battery Charger for "AAA" "AA" "C" "D" & 9V Batteries.

Charging Time: 7-8 Hours

Output: 2.4VDC/240ma & 9VDC @ 15ma.

( 1 per box with instuctions )

AA Battery Holder.

Holds 4 AA batteries in a 2-by-2 pattern.

Series-connected for 6 volt output.

Dimensions 2-1/4" x 1" x 1-1/8".

Includes a mating snap-on connector, to which leads may be soldered.