Fans
Small Cooling Fans for Electronics
Electronic Surplus carries small cooling fans for electronics that are reliable and efficient. We have both AC and DC fans in stock. DC fan uses less energy and has a higher speed than an AC fan; however, an AC fan provides a more direct and consistent airflow throughout the day. Fortunately, whether you choose an AC or DC small cooling fans for electronics, you’ll get the cool air flow that you desire.
We distribute DC and AC powered fan accessories, as well. Our accessories range from finger guards to grills. Our manufacturers include Qualtek Electronics, Comair Rotron, and more, and we offer their products at surplus prices. If we don’t have the product you need in stock, please submit a part request and we’ll get back to you shortly.
Shop our selection of DC and AC powered blower fans and accessories below.
- Comair Rotron - ST12B3QDNX - 032942 - Fans, Axial. 12 VDC, 0.28 Amp. 3400 RPMSpecial Price $8.98 Regular Price $12.95Out of stock
Comair Rotron - 032942 - ST12B3QDNX - Fans, Axial.
Sprint 12VDC 0.28 Amp, 3.4 watt (Operates with 6 to14 VDC)
3400RPM, 34CFM.
Plastic blades & housing, ball bearings.
Noise 41dB
Connections: Red + Positive, Black - Minus, Blue Stall
PTC and Polarity Protected - 10sec. Delay from stall until output goes Low
Dimensions: (80 x 32mm).
Fan Stall Output: Open Collector (Requires Pull-Up Resistor) 15mA max Sinking
OverallDimensions: 3.15" x 3.15" x 1.3".
3.15" (80mm) square with four 6-32 threaded inserts on strut side at 2.81"centers.
Weight: 0.45 lb
Newark Stock No. 91B3081
UL, CSA Listed
- SHICOH IC FAN - 0610-12 - 0610-12HHV - Fan, Axial. 12VDC 0.15A, 60 X 10mm.Out of stock
SHICOH IC FAN - 0610-12 - 0610-12HHV - 12VDC 2 Wire Brushless Fan, Axial.
In Japanese Shicoh means “thinking” it is the working philosophy of everyone at Shicoh Engineering.
- Compact design, light weight
- Silent Running
- Energy efficient
- Anti Burnout Device and Low electrical Interference
12VDC 0.15A. (230mW) 3.5".
Termination: 2 Wire, 22 AWG Female Connector
11 Plastic Blade Ultra Quiet Server Square Fan.
Brushless Ball Bearing Motor
4 hole 2" Spacing.
Overall Dimensions: 2.35" x 2.35" X 0.425". (60mm X 60mm X 10.3mm)
Opening: 2.3".
Mounting: 4 Hole 2" (50mm) Spacing
Weight: 0.9 oz.
Silent at 6VDC, Lots of air Flow at 12VDC
Air Flow @ 12VDC: 12.7 CFM (m3/min)
RPM: 3300
Very Thin, Silent on 6V, Lots of Air at 12V.
Number Fan Blades: 11
Material-Venturi / Propeller: UL94V-0 Plastic
Static Pressure (Max): 12.7 / 0.33(m3/min)
Noise: 16.7 (dBA)
Weight: 0.9 Ounce
Life Expectancy-MTBF: 50,000 Hours @ 25C
Applications: Computer/Server/IC/CPU Cooling
Quality Made in Japan prior to current product line transfer to China.
New Old Stock.
Approval: UL/CSA
Alternates: Dynatron F6010AP-12LCWDF126010BL, Quick Cool E232190, F6010AP-12LCW
- GLOBE - D47-B10A-04W2-000 0.32Amp - Fans, DC. 12V 7-blade 120x25mm RFE$1.95Out of stockFan, axial. Voltage: 12VDC. Current: 0.32Amp 3.8 Watt, RevA. 7 Blade. Dimensions: 120mm square x 25mm (4.7" sq x 1" deep). Note: Computer cooling fans. Some may have less than 1" leads. Used/Removed from equipment. Learn More
- Globe - D47-B10B-04W49-00 - Fan, axial. 12VDC 0.44A.Special Price $6.98 Regular Price $14.50READY TO SHIP - ONLY 50 LEFT IN STOCK!
Globe - D47-B10B-04W49-00 Fan, axial.
Power: 12VDC 0.44amp, 3.6 Watt
Air flow: 88 CFM.
Ball bearing.
Material: Plastic.
Dimensions: 1" x 4.7" square (120mm x 120mm x 26mm), 7 blades.
Weight: 6 oz (218.291g)
Used/Removed from equipment.
- GLOBE - D47-B10A-04W2-000 - Fan, Axial. 12VDC 0.20A, 80 CFM, 20mm, RFESpecial Price $4.98 Regular Price $8.50IN STOCK - MORE THAN 500 READY TO SHIP!
GLOBE - D47-B10A-04W2-000 Fan, Axial.
Power Input: 12VDC 0.20A. (Range: 6.0 - 13.8 VDC)
Termination/Connections: 2 Wire Leads.
Speed: 2200 RPM.
Air Flow: 80 CFM.
Lifetime Lubricated Ball Bearing.
Construction: Reinforced Polybutylene
UL-94V.
4 Mounting holes 4.13" spacing.
Dimeensions: 4.69" x 1". (120mm X 120mm X 25mm)
Opening: 4.2".
Weight: 7 oz.
Electronic locked rotor and polarity protected some leads may be short.
Made in Thailand
Life Expectancy: >75,000 Hours
Note: Used/Removed from Equipment - Sell New $26
Approvals: UL CSA VDE CE
Learn More - GLOBE - D24-B10A-04W3-000 - Fans, DC. 12VDC 0.13Amp 1.4 watt, 60 X 25mm.IN STOCK - MORE THAN 100 READY TO SHIP!
GLOBE - D24-B10A-04W3-000 Fan, Axial.
Features:
- Solid State Brushless Motor Design Provides:
- Improved Performance
- High Efficiency
- Auto Restart
- Low Input Power
- Lower Operating Voltages - Precision Ball Bearing System Provides:
- Longer Life
- Higher Temperature Extremes
- Lower Noise Over Time
- Maximum Shock and Vibration Resistance - Designed to Meet the Rigid Standards of UL, CSA, VDE, and CE
- Electronic Locked Rotor Protection
- 12VDC 0.13Amp, 3600 RPM, 17CFM, 1.44 Watt.
- Efficient extra low current draw.
- Low noise, ball bearing, 28dBA.
- Dimensions: 2.36" x 2.36"x 1" (60mm X 60mm x 25mm),
- Maximum Operating Temperature 70C
- Minimum Operating Temperature -10C
- Rotation CW
- 2.3 Oz.
- 5 blade. Material: Plastic. 2 Wire leads.
- RoHS Compliant
Used/RFE.
- Solid State Brushless Motor Design Provides:
- COMAIR ROTRON - MC12B7X - 12VDC 5-Blade 120mm Muffin - Used
COMAIR ROTRON - MC12B7X - 12VDC Muffin Fan 0.66Amp
Voltage Range: 6 VDC to 14 VDC
Power: 7.9Watt
Nominal Speed: 3700 RPM
Airflow: 102 CFM
PTC & Polarity Protected
Three (3) wire - The 3rd is a 5 Volt TTL Tachometer Output - Two Pulses per Revolution
Blades: 5-Blade Plastic
Dimensions: 4.72" Square X 1.26" (120mm x 120mm X 30mm)
Mounting Holes 4.125" Square
Weight: 0.85 Pounds
Excellent Condition - Lightly Used - Removed from Equipment.
Alternate: 031414
Note: Newer Production Comair Rotron Fans are inferior and made in China.
- NIDEC-TORIN - TA225DC - A31390-10 - Fan, Axial. 12VDC 0.08A.Special Price $6.98 Regular Price $9.50READY TO SHIP - ONLY 42 LEFT IN STOCK!
NIDEC-TORIN - TA225DC - A31390-10 Fan, Axial.
Input Power: 12VDC 0.08A. 2 Wire/Pin.
Speed: 2600 RPM.
Air Flow:12 CFM.
Construction: 9 plastic blades metal frame.
Mounting: 2 hole 2.78" spacing.
Dimensions: 2.37" x 2.71" x 0.8".
Opening: 2.25".
Ball Bearings.
Weight: 3.6 oz.
Terminals Out Top, Solder or Small Quick Connect
Model A31390-10.
Made in Japan
Learn More - NMB Minebea - 2410ML-04W-B20 - Micro Boxer Axial Fan, 12VDC 0.16A.IN STOCK - MORE THAN 100 READY TO SHIP!
NMB Minebea - 2410ML-04W-B20 Micro Boxer Axial Fan
Auto restart/Polarity Protection
3600 RPM
12VDC 0.16A,
16.9 CFM,
Ball Bearing construction
7 plastic blades, 4 hole 2" spacing.
Dimensions: 2.36" x 1", 2 wire.
Operating Temperature -10C to +70C
Opening: 2.25".
Weight: 2.2 oz.
Low noise, 28 dB
Used/Removed from equipment, some may have short 1" leads.
Made in Thailand
Learn More - COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial. 12VDC 0.12Amp 1.4 watt, 33CFM.
COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial, Sprint DC.
12VDC 0.12Amp 1.4 watt,
Airflow: 33 CFM.
Sprint DC.
Plastic 5 blades.
PTC & Polarity Protected
Mount: Panel 4 holes with 2.82" centers.
Dimensions: 80mm Square x 32mm wide.
Note: Alt P/N: 031504.
UL, CSA Listed
Condition: LN Used/Removed from equipment.
Mixed length on lead wires. Some slightly dusty/dirty.
Weight 7 oz.
Learn More - Miniebea NMB - 4710NL-05W-B50 - 24 VDC Axial Fan, 119X119x25.5mm, Case Cooling FanREADY TO SHIP - ONLY 17 LEFT IN STOCK!
Miniebea NMB - 4710NL-05W-B50 - 24 VDC Axial Fan, 119X119X25.5mm, Case/Server Cooling Fan
Brand: NMB-Minibea DC Brushless Fan Motor
Dual Ball BearingSize: 120*120*25mm
Air Flow: 114.7 CFM
Speed: 2800 RPM Noise: 41.3 dB
Power: 6.96 Watts
Operating Temperature: 14 to 140F (-10 to 60C)
Mean Time to Failure (MTTF): 180,000 hours
Rated voltage: 24 VDC - 2 Wire, 0.31 AmpsApprovals: CE, CSA, UL, VDE
Learn More - NMB - 3110KL-04WB57 - 12VDC FAN 80x33mm w/ fingerguard$4.50READY TO SHIP - ONLY 13 LEFT IN STOCK!12VDC Fan 0.35A brushless (RFE/Used) mixed manuf JMC/DA-TECH 0825-12HBT, etc 3.155" (80.1mm) x 3.155" (80.1mm) x 0.982" (24.9mm) deep with one finger guard attached and a 3-cond 4" wire Learn More
- ETRI - 681DH1LP11000 - Fan, DC. 12VDC 0.2Amp 2.4 watt.$5.50Out of stockFan, DC. 12VDC 0.2Amp 2.4 watt. Thin, 7 blade. All plastic. Mount: 4 holes at 4" centers. Dimensions: 3.156" long x 3.162" high x 0.602" deep. Two (2) wire, short leads with a 2 position female connector. Note: Model 681DH. Gently used, dusty. Learn More
- COMAIR ROTRON - FN12B3QDN 032885 - Fans, axial. 12VDC 0.21Amp, 3.7 watt.$6.95Out of stockFans, axial. 12VDC 0.21Amp, 3.7 watt. Flight II. Dimensions: 3-5/8" square x 1" deep (92 x 26mm), 7 plastic blade. Cross: 032885. Learn More
- COOLTRON - FD4010B12W7-81-2N - Fan, Axial. 12VDC 2.16 watt, 9 Blade, 40X40X10mm.Out of stock
COOLTRON - FD4010B12W7-81-2N Fan, Axial.
12VDC 130mA 2.16 watt, 9 blade.
Operating Voltage: 6.0 to 13.8 VDC
Ball Bearing.
Air Flow: 5.5 to 8.6 CFM.
Static Pressure: 3.7 (mmH20).
Noise: 28.60 dBA.
Material: Thermoplastic, PBT, UL 94V-0
Operation Temp: -20℃~70℃ (Humidity 15%-90%RH)
Storage Temp: -40℃~85℃ (Humidity 15%-90%RH)
Insulation Resistance: 10MΩ, 500VDC/min between bare wire and frame
Dielectric Strength: 5mA max. 500VAC/min between bare wire and frame
Dimensions: 1.6" square x 0.412" deep, (40 x 40mm x 10.5mm deep).
Mount: 4 hole, 1.77" (32.0mm) Centers.
With 2 conductor #28 AWG wire leads.
Life Expectancy: 80,000 Hours @ 40C
Alternate: FD4010-81 Series
UL, CUL, TUL Approvals
Applications: Server and General Equiment Cooling
Additional information: http://www.cooltron.com/uploads/soft/20150811/1439267854.pdf
https://www.datasheetarchive.com/whats_new/669a1639db195bddfc0eef380b68db3d.html
http://www.cooltron.com/stockshow/pdf/FD4010B12W7-81-2N2.pdf
https://www.youtube.com/watch?v=fH_2Jjzqzxg
- EBM Papst - W2G076-BD01-13 - Fan, Axial. 12VDC, 6-16VDC 1.7 watt, 5 blade.Special Price $8.98 Regular Price $12.95READY TO SHIP - ONLY 46 LEFT IN STOCK!
EBM Papst - W2G076-BD01-13 - Fan, Axial, Ball Bearing.
Voltage: 12VDC
Nominal Voltage Rating: 6 -16 VDC
Power: 4.0 watt
Air Flow: 67 m3/h
Speed: 4200 RPM
Sound Power Level: 5.8B
Sound Pressure Level: 43
Numer of Blades:5 Blade
Construction Material: Glass-fiber reinforced PBT/PA Plastic.
Temperature: -20 C to 75 C
Connections: Quick Connect
Dimensions: 3.15" square x 1.26" deep (80mm x 32mm).
Service Life: 62500 Hours
Protection: IP54 / IP68
Approvals: VDE, CSA, UL, CE
Used/Removed from equipment.
EBM Papst.
Learn More - TAIWAN - CPU Cooler - Fan, DC. 12VDC Pentium II cooler.$9.00Out of stockFan, DC. 12VDC Pentium II cooler. Heatsinked unit. Dimensions: 5" long x 2-1/4" wide x 1-1/2" high. fan is ball bearing/impedance protected. Listed: UL/CSA. NIB. Learn More
- Intel / Sanyo Denki - 109X7712T1S04 - Fan, axial. 12VDC 0.17Amp. A50441-002.$29.99Fan, axial. 12VDC 0.17Amp. Plastic, 7 blade. Complete with (unattached) heatsink 2.909" long x 2.525" wide x 1.003" high. New. Note: Double marked A50441-002. New. Learn More
- Intel / Nidec - F07R-12B4S1 - Fan, Axial. A50933-003- 12VDC 0.17Amp, 3 Pin CPU Cooling Fan.Special Price $19.98 Regular Price $29.50
Intel / Nidec - F07R-12B4S1 - Fan, Axial A50933-003.
3 Pin CPU Cooling Fan
Voltage/Current: 12VDC 0.17Amp.
Socket Compatibility: Socket 370
Fan DIameter: 75mm
Ball Bearing
Material: Thermoplastic
Color: Black
Plastic, 7 blade.
Complete with (unattached) heatsink 2.909" long x 2.525" wide x 1.003" high.
New in Blister Pack.
Note: Double marked A50933-003 and 03AC1.
Applications: Pentium 3 and others.
Learn More - SANYODENKI - 109P0412B301 - Fan, axial. 12VDC 3.36W.$8.99Fan, axial. 12VDC 3.36 watt 13.42CFM 10300RPM 40dBA. With tach. Dimensions: 40 x 40 x 28mm. Note: Mini. Learn More
- EBM PAPST - RG90-18/12N/19 - Fan, Radial Centrifical Blower. 12VDC 580mA 7 watt.Special Price $16.98 Regular Price $49.95Out of stock
EBM PAPST - RG90-18/12N/19 - Fan, Radial Centrifical Blower.
EBM Papst Radial Fan, Blower. RG90DC Series
12VDC (7 - 15VDC Range) 580mA 7 watt. 32.4 CFM, 55db, Ball bearing.
Dimensions: 5-5/16" square x 1-1/2" deep (135mm x 135mm x 38mm).
Galvanised Sheet Steel Housing.
Operating Temerature --30 to 75C,
Oxidation on metal housing from damp storage. Excellent for spot cooling.
DC Radial blower with electronically commutated external rotor motor.
Electronic protection against reverse polarity, blocking and overloading by PTC-resistor, partially impediance protected.
Spiral housing and blower of fiberglass reinforced plastic.
Radial air exhaust through housing port.
Electrical connection via 2 leads AWG22, TR64.
UL, CSA, VDE Approved, Rohs Compliant.
Used/As Removed from Equipment.
Made in Germany
Learn More