DC Fans
- Comair Rotron - ST12B3QDNX - 032942 - Fans, Axial. 12 VDC, 0.28 Amp. 3400 RPMSpecial Price $8.98 Regular Price $12.95Out of stock
Comair Rotron - 032942 - ST12B3QDNX - Fans, Axial.
Sprint 12VDC 0.28 Amp, 3.4 watt (Operates with 6 to14 VDC)
3400RPM, 34CFM.
Plastic blades & housing, ball bearings.
Noise 41dB
Connections: Red + Positive, Black - Minus, Blue Stall
PTC and Polarity Protected - 10sec. Delay from stall until output goes Low
Dimensions: (80 x 32mm).
Fan Stall Output: Open Collector (Requires Pull-Up Resistor) 15mA max Sinking
OverallDimensions: 3.15" x 3.15" x 1.3".
3.15" (80mm) square with four 6-32 threaded inserts on strut side at 2.81"centers.
Weight: 0.45 lb
Newark Stock No. 91B3081
UL, CSA Listed
- SHICOH IC FAN - 0610-12 - 0610-12HHV - Fan, Axial. 12VDC 0.15A, 60 X 10mm.Out of stock
SHICOH IC FAN - 0610-12 - 0610-12HHV - 12VDC 2 Wire Brushless Fan, Axial.
In Japanese Shicoh means “thinking” it is the working philosophy of everyone at Shicoh Engineering.
- Compact design, light weight
- Silent Running
- Energy efficient
- Anti Burnout Device and Low electrical Interference
12VDC 0.15A. (230mW) 3.5".
Termination: 2 Wire, 22 AWG Female Connector
11 Plastic Blade Ultra Quiet Server Square Fan.
Brushless Ball Bearing Motor
4 hole 2" Spacing.
Overall Dimensions: 2.35" x 2.35" X 0.425". (60mm X 60mm X 10.3mm)
Opening: 2.3".
Mounting: 4 Hole 2" (50mm) Spacing
Weight: 0.9 oz.
Silent at 6VDC, Lots of air Flow at 12VDC
Air Flow @ 12VDC: 12.7 CFM (m3/min)
RPM: 3300
Very Thin, Silent on 6V, Lots of Air at 12V.
Number Fan Blades: 11
Material-Venturi / Propeller: UL94V-0 Plastic
Static Pressure (Max): 12.7 / 0.33(m3/min)
Noise: 16.7 (dBA)
Weight: 0.9 Ounce
Life Expectancy-MTBF: 50,000 Hours @ 25C
Applications: Computer/Server/IC/CPU Cooling
Quality Made in Japan prior to current product line transfer to China.
New Old Stock.
Approval: UL/CSA
Alternates: Dynatron F6010AP-12LCWDF126010BL, Quick Cool E232190, F6010AP-12LCW
- GLOBE - D47-B10A-04W2-000 0.32Amp - Fans, DC. 12V 7-blade 120x25mm RFE$1.95Out of stockFan, axial. Voltage: 12VDC. Current: 0.32Amp 3.8 Watt, RevA. 7 Blade. Dimensions: 120mm square x 25mm (4.7" sq x 1" deep). Note: Computer cooling fans. Some may have less than 1" leads. Used/Removed from equipment. Learn More
- Globe - D47-B10B-04W49-00 - Fan, axial. 12VDC 0.44A.Special Price $6.98 Regular Price $14.50READY TO SHIP - ONLY 50 LEFT IN STOCK!
Globe - D47-B10B-04W49-00 Fan, axial.
Power: 12VDC 0.44amp, 3.6 Watt
Air flow: 88 CFM.
Ball bearing.
Material: Plastic.
Dimensions: 1" x 4.7" square (120mm x 120mm x 26mm), 7 blades.
Weight: 6 oz (218.291g)
Used/Removed from equipment.
- GLOBE - D47-B10A-04W2-000 - Fan, Axial. 12VDC 0.20A, 80 CFM, 20mm, RFESpecial Price $4.98 Regular Price $8.50IN STOCK - MORE THAN 500 READY TO SHIP!
GLOBE - D47-B10A-04W2-000 Fan, Axial.
Power Input: 12VDC 0.20A. (Range: 6.0 - 13.8 VDC)
Termination/Connections: 2 Wire Leads.
Speed: 2200 RPM.
Air Flow: 80 CFM.
Lifetime Lubricated Ball Bearing.
Construction: Reinforced Polybutylene
UL-94V.
4 Mounting holes 4.13" spacing.
Dimeensions: 4.69" x 1". (120mm X 120mm X 25mm)
Opening: 4.2".
Weight: 7 oz.
Electronic locked rotor and polarity protected some leads may be short.
Made in Thailand
Life Expectancy: >75,000 Hours
Note: Used/Removed from Equipment - Sell New $26
Approvals: UL CSA VDE CE
Learn More - GLOBE - D24-B10A-04W3-000 - Fans, DC. 12VDC 0.13Amp 1.4 watt, 60 X 25mm.IN STOCK - MORE THAN 100 READY TO SHIP!
GLOBE - D24-B10A-04W3-000 Fan, Axial.
Features:
- Solid State Brushless Motor Design Provides:
- Improved Performance
- High Efficiency
- Auto Restart
- Low Input Power
- Lower Operating Voltages - Precision Ball Bearing System Provides:
- Longer Life
- Higher Temperature Extremes
- Lower Noise Over Time
- Maximum Shock and Vibration Resistance - Designed to Meet the Rigid Standards of UL, CSA, VDE, and CE
- Electronic Locked Rotor Protection
- 12VDC 0.13Amp, 3600 RPM, 17CFM, 1.44 Watt.
- Efficient extra low current draw.
- Low noise, ball bearing, 28dBA.
- Dimensions: 2.36" x 2.36"x 1" (60mm X 60mm x 25mm),
- Maximum Operating Temperature 70C
- Minimum Operating Temperature -10C
- Rotation CW
- 2.3 Oz.
- 5 blade. Material: Plastic. 2 Wire leads.
- RoHS Compliant
Used/RFE.
- Solid State Brushless Motor Design Provides:
- COMAIR ROTRON - MC12B7X - 12VDC 5-Blade 120mm Muffin - Used
COMAIR ROTRON - MC12B7X - 12VDC Muffin Fan 0.66Amp
Voltage Range: 6 VDC to 14 VDC
Power: 7.9Watt
Nominal Speed: 3700 RPM
Airflow: 102 CFM
PTC & Polarity Protected
Three (3) wire - The 3rd is a 5 Volt TTL Tachometer Output - Two Pulses per Revolution
Blades: 5-Blade Plastic
Dimensions: 4.72" Square X 1.26" (120mm x 120mm X 30mm)
Mounting Holes 4.125" Square
Weight: 0.85 Pounds
Excellent Condition - Lightly Used - Removed from Equipment.
Alternate: 031414
Note: Newer Production Comair Rotron Fans are inferior and made in China.
- NIDEC-TORIN - TA225DC - A31390-10 - Fan, Axial. 12VDC 0.08A.Special Price $6.98 Regular Price $9.50READY TO SHIP - ONLY 42 LEFT IN STOCK!
NIDEC-TORIN - TA225DC - A31390-10 Fan, Axial.
Input Power: 12VDC 0.08A. 2 Wire/Pin.
Speed: 2600 RPM.
Air Flow:12 CFM.
Construction: 9 plastic blades metal frame.
Mounting: 2 hole 2.78" spacing.
Dimensions: 2.37" x 2.71" x 0.8".
Opening: 2.25".
Ball Bearings.
Weight: 3.6 oz.
Terminals Out Top, Solder or Small Quick Connect
Model A31390-10.
Made in Japan
Learn More - NMB Minebea - 2410ML-04W-B20 - Micro Boxer Axial Fan, 12VDC 0.16A.IN STOCK - MORE THAN 100 READY TO SHIP!
NMB Minebea - 2410ML-04W-B20 Micro Boxer Axial Fan
Auto restart/Polarity Protection
3600 RPM
12VDC 0.16A,
16.9 CFM,
Ball Bearing construction
7 plastic blades, 4 hole 2" spacing.
Dimensions: 2.36" x 1", 2 wire.
Operating Temperature -10C to +70C
Opening: 2.25".
Weight: 2.2 oz.
Low noise, 28 dB
Used/Removed from equipment, some may have short 1" leads.
Made in Thailand
Learn More - COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial. 12VDC 0.12Amp 1.4 watt, 33CFM.
COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial, Sprint DC.
12VDC 0.12Amp 1.4 watt,
Airflow: 33 CFM.
Sprint DC.
Plastic 5 blades.
PTC & Polarity Protected
Mount: Panel 4 holes with 2.82" centers.
Dimensions: 80mm Square x 32mm wide.
Note: Alt P/N: 031504.
UL, CSA Listed
Condition: LN Used/Removed from equipment.
Mixed length on lead wires. Some slightly dusty/dirty.
Weight 7 oz.
Learn More - Miniebea NMB - 4710NL-05W-B50 - 24 VDC Axial Fan, 119X119x25.5mm, Case Cooling FanREADY TO SHIP - ONLY 17 LEFT IN STOCK!
Miniebea NMB - 4710NL-05W-B50 - 24 VDC Axial Fan, 119X119X25.5mm, Case/Server Cooling Fan
Brand: NMB-Minibea DC Brushless Fan Motor
Dual Ball BearingSize: 120*120*25mm
Air Flow: 114.7 CFM
Speed: 2800 RPM Noise: 41.3 dB
Power: 6.96 Watts
Operating Temperature: 14 to 140F (-10 to 60C)
Mean Time to Failure (MTTF): 180,000 hours
Rated voltage: 24 VDC - 2 Wire, 0.31 AmpsApprovals: CE, CSA, UL, VDE
Learn More - NMB - 3110KL-04WB57 - 12VDC FAN 80x33mm w/ fingerguard$4.50READY TO SHIP - ONLY 13 LEFT IN STOCK!12VDC Fan 0.35A brushless (RFE/Used) mixed manuf JMC/DA-TECH 0825-12HBT, etc 3.155" (80.1mm) x 3.155" (80.1mm) x 0.982" (24.9mm) deep with one finger guard attached and a 3-cond 4" wire Learn More
- ETRI - 681DH1LP11000 - Fan, DC. 12VDC 0.2Amp 2.4 watt.$5.50Out of stockFan, DC. 12VDC 0.2Amp 2.4 watt. Thin, 7 blade. All plastic. Mount: 4 holes at 4" centers. Dimensions: 3.156" long x 3.162" high x 0.602" deep. Two (2) wire, short leads with a 2 position female connector. Note: Model 681DH. Gently used, dusty. Learn More
- COMAIR ROTRON - FN12B3QDN 032885 - Fans, axial. 12VDC 0.21Amp, 3.7 watt.$6.95Out of stockFans, axial. 12VDC 0.21Amp, 3.7 watt. Flight II. Dimensions: 3-5/8" square x 1" deep (92 x 26mm), 7 plastic blade. Cross: 032885. Learn More
- COOLTRON - FD4010B12W7-81-2N - Fan, Axial. 12VDC 2.16 watt, 9 Blade, 40X40X10mm.Out of stock
COOLTRON - FD4010B12W7-81-2N Fan, Axial.
12VDC 130mA 2.16 watt, 9 blade.
Operating Voltage: 6.0 to 13.8 VDC
Ball Bearing.
Air Flow: 5.5 to 8.6 CFM.
Static Pressure: 3.7 (mmH20).
Noise: 28.60 dBA.
Material: Thermoplastic, PBT, UL 94V-0
Operation Temp: -20℃~70℃ (Humidity 15%-90%RH)
Storage Temp: -40℃~85℃ (Humidity 15%-90%RH)
Insulation Resistance: 10MΩ, 500VDC/min between bare wire and frame
Dielectric Strength: 5mA max. 500VAC/min between bare wire and frame
Dimensions: 1.6" square x 0.412" deep, (40 x 40mm x 10.5mm deep).
Mount: 4 hole, 1.77" (32.0mm) Centers.
With 2 conductor #28 AWG wire leads.
Life Expectancy: 80,000 Hours @ 40C
Alternate: FD4010-81 Series
UL, CUL, TUL Approvals
Applications: Server and General Equiment Cooling
Additional information: http://www.cooltron.com/uploads/soft/20150811/1439267854.pdf
https://www.datasheetarchive.com/whats_new/669a1639db195bddfc0eef380b68db3d.html
http://www.cooltron.com/stockshow/pdf/FD4010B12W7-81-2N2.pdf
https://www.youtube.com/watch?v=fH_2Jjzqzxg
- EBM Papst - W2G076-BD01-13 - Fan, Axial. 12VDC, 6-16VDC 1.7 watt, 5 blade.Special Price $8.98 Regular Price $12.95READY TO SHIP - ONLY 46 LEFT IN STOCK!
EBM Papst - W2G076-BD01-13 - Fan, Axial, Ball Bearing.
Voltage: 12VDC
Nominal Voltage Rating: 6 -16 VDC
Power: 4.0 watt
Air Flow: 67 m3/h
Speed: 4200 RPM
Sound Power Level: 5.8B
Sound Pressure Level: 43
Numer of Blades:5 Blade
Construction Material: Glass-fiber reinforced PBT/PA Plastic.
Temperature: -20 C to 75 C
Connections: Quick Connect
Dimensions: 3.15" square x 1.26" deep (80mm x 32mm).
Service Life: 62500 Hours
Protection: IP54 / IP68
Approvals: VDE, CSA, UL, CE
Used/Removed from equipment.
EBM Papst.
Learn More - TAIWAN - CPU Cooler - Fan, DC. 12VDC Pentium II cooler.$9.00Out of stockFan, DC. 12VDC Pentium II cooler. Heatsinked unit. Dimensions: 5" long x 2-1/4" wide x 1-1/2" high. fan is ball bearing/impedance protected. Listed: UL/CSA. NIB. Learn More
- Intel / Sanyo Denki - 109X7712T1S04 - Fan, axial. 12VDC 0.17Amp. A50441-002.$29.99Fan, axial. 12VDC 0.17Amp. Plastic, 7 blade. Complete with (unattached) heatsink 2.909" long x 2.525" wide x 1.003" high. New. Note: Double marked A50441-002. New. Learn More
- Intel / Nidec - F07R-12B4S1 - Fan, Axial. A50933-003- 12VDC 0.17Amp, 3 Pin CPU Cooling Fan.Special Price $19.98 Regular Price $29.50
Intel / Nidec - F07R-12B4S1 - Fan, Axial A50933-003.
3 Pin CPU Cooling Fan
Voltage/Current: 12VDC 0.17Amp.
Socket Compatibility: Socket 370
Fan DIameter: 75mm
Ball Bearing
Material: Thermoplastic
Color: Black
Plastic, 7 blade.
Complete with (unattached) heatsink 2.909" long x 2.525" wide x 1.003" high.
New in Blister Pack.
Note: Double marked A50933-003 and 03AC1.
Applications: Pentium 3 and others.
Learn More - SANYODENKI - 109P0412B301 - Fan, axial. 12VDC 3.36W.$8.99Fan, axial. 12VDC 3.36 watt 13.42CFM 10300RPM 40dBA. With tach. Dimensions: 40 x 40 x 28mm. Note: Mini. Learn More
- EBM PAPST - RG90-18/12N/19 - Fan, Radial Centrifical Blower. 12VDC 580mA 7 watt.Special Price $16.98 Regular Price $49.95Out of stock
EBM PAPST - RG90-18/12N/19 - Fan, Radial Centrifical Blower.
EBM Papst Radial Fan, Blower. RG90DC Series
12VDC (7 - 15VDC Range) 580mA 7 watt. 32.4 CFM, 55db, Ball bearing.
Dimensions: 5-5/16" square x 1-1/2" deep (135mm x 135mm x 38mm).
Galvanised Sheet Steel Housing.
Operating Temerature --30 to 75C,
Oxidation on metal housing from damp storage. Excellent for spot cooling.
DC Radial blower with electronically commutated external rotor motor.
Electronic protection against reverse polarity, blocking and overloading by PTC-resistor, partially impediance protected.
Spiral housing and blower of fiberglass reinforced plastic.
Radial air exhaust through housing port.
Electrical connection via 2 leads AWG22, TR64.
UL, CSA, VDE Approved, Rohs Compliant.
Used/As Removed from Equipment.
Made in Germany
Learn More