DC Fans

Fan, axial. 24VDC 0.10A. (12-30VDC 11-29CFM) 2.5 Watt, 11-29CFM. Fan : 2 Wire 62.2mm square x 26.0mm deep. 7 Plastic blade. Mounted on removable plastic frame (overall 4.674" long), with four holes underneath, 70.2mm (2.767") centers. Complete with finger guard. Weight: 5 oz. Note: Brushless electronic motor, polarity protected. There is a four pin connector on the fan (AMP 1-480702-0 with the red positive wire on position 1 and the blue negative wire on position 2 and an interlock jumper between positions 3 and 4). A mating connector is AMP 1-480702-1 with 350690-1 pin contacts. EBM Papst. Made in Germany.

MATSUSHITA - Panaflo - FBH-09A24LB  Fan, axial. 24VDC 0.10A, DC Brushless.

Dimensions: 3.6" square x 1" deep.

4.5" mount diagonal - 4 hole.

7 plastic blades.

2 wire leads.

Double marked 7BO5D4-B.

Weight: 5 oz.

TRW GLOBE - 19A2689 Fan, Axial. Xerox 127P1668 

A Vaneaxial fan consisting of a disk-type wheel within a cylinder with a set of air guide vanes. It has a higher efficiency than any other type of axial-flow fans and more expensive to manufacture.

24VDC.

Vaneaxial.

Dimensions: Round 2.620" D x 2.577" deep.

Mounts in hole with instrument-style flange front, four holes 2.111" apart, 3" centers.

Four plastic blade.

Two wire, 5" long with a 2 position Molex connector.

Made in USA

Protechnic Magic - MGT8024HB-O25 - IP68 Waterproof Fan

DC Brushless Fan, Axial with Lock Rotor Protection.

28VDC 0.16 Amp. 3 Wire

Dual Ball Bearing

3000 RPM +/- 10%

Airflow: 41.34 CFM

Noise: 33.2dB (A), Max. 36.2 dB(A)

Life Expectancy: 70,000 hrs at continuous 40C 

Mount: 4 hole with 4" centers and 18" wire leads of which 8" is Watertight.

Housing material: Plastic with 7 plastic blades.

Dimensions: 80X80X25mm

Ingress Protection Rating: IP68 

Operating Temp. -10 to 70C, Storage Temp. -40 to 70C

TOYO - TFDD8024RXA - Fan, Axial.

Supply Voltage: 24VDC

Supply Current:0.145 Amp.

DC Brushless, Ball Bearing.

Mount: 4 hole with 4" centers and (2) 10' wire leads.

Housing material: plastic with 7 plastic blades.

Dimensions: 3.17" Square x 0.91" (23.1mm) deep. (80 X 80 X 25 mm)

Note: Ball bearing.

Made in Japan

EG&G-ROTRON - SD24B1 - Fan, Axial.

Rotron DC fans feature outstanding airflow performance in high pressure systems and all include a permanent split capacitor motor. An extended ball bearing life ensures fault-free use for a significant period of time and ensures Rotron DC fans provide a flexible and dependable cooling solution.

24VDC 0.12Amp, 35CFM. 2 wire 12".

Metal housing, 7 plastic blades.

Mount: 4 hole 4" centers.

Dimensions: 80 x 80 x 38mm (3-1/4" square x 1-5/8" deep).

Ball bearing. DC Brushless.

Air Flow: 59m³/h (35CFM)

Noise Level: 47.6dB

Fan Speed: 3500rpm

Bearing Type: Ball

Polarity protected. Sprite.

Approvals: UL, CSA, TUV.

New Old Stock

Made in USA

DC CENTAUR - CNDC24K4-601 Fans, Axial.

24VDC 11 Watt.

Brushless, Ball Bearing, 5 Plastic blade.

Dimensions: 120 x 39mm.

Bearng Type: Ball Bearing

Housing: Aluminum Cast.

Used/removed from Equipment.  Old Stock

Dimensions: Width: 1 in, Height: 4.7 in, Length: 4.7 in (36mm X 120 mm X 120Mm)

[Note: These fans have three wires, the Red and White wires connect to +24VDC, the Black wire connects to the negative side of the 24VDC source.

Made in Japan

Retail for $75