Hardware

Plast-A-Matic - Project Box Enclosure.

Instrument Enclosure, 2 piece top & bottom.

Snaps together, requires 4 screws (not included).

Front panel would be approximately 5.25"wide x 2.5" tall (not included).

Material: Plastic.

Actual Dimensions: 138 x 71 x 130mm deep.

Color: Gray.

Learn More

Hardware, knobs. Slide pot knobs. Color: white. Dimensions: 9.8mm wide (0.387") x 5.5mm (0.219") deep x 11.1mm (0.438") high. Red and Black are available also. Note: I actually thick these knobs are better suited for P/B switch banks. They will fit a shaft 3.6mm x 2.4mm, but will sit parallel to slide pot. Package of 10. Learn More

Hardware, knobs. For potentiometers/trimpots, flat style. Color: white. Package of 10. Note: Perfect fit for our P/N: MS-022, SKU 5942 pot, not included. Learn More

Hardware, knobs. For potentiometers/trimpots, flat style. Color: white. Package of 10. Note: Perfect fit for our P/N: MS-022, SKU 5942 pot, not included. Learn More

Hardware, knob. For switch banks with a square 1/8" shaft. material: plastic. Dimensions: 0.29" D x 0.272" high. Color: white. Package of 5. Note: Perfect fit for a switch bank like our SKU 1772, not included. Learn More

HOFFMAN - 6960B - wall Mount Steel Enclosure.

Heavy Duty.

Material: Mild Steel.

Seams continuously welded and ground smooth.

Four Internal Weldnuts provided for mounting optional panels or terminal block kits.

External Mount: 4-hole wall mounting flange 0.75" wide on each end (4) - 7/8" conduit holes, two on one long side, one at either end. Steel thickness: 0.085".

Approximate Dimensions: 8" wide x 10.0" high x 4.00" deep. (ID: 7-3/4" x 8-3/4" x 3-7/8" high).

Color: Gray.

Application: Ideal for a broad range of applications, the enclosure’s screw cover is not included but would have been secured in each corner for a positive seal but easily removed. 

Note: Does not include Screw-on Cover.

Note: Enclosure are very heavy and require additional shipping charges dependent upon destintation. 

Learn More

BUD INDUSTRIES - 60-2380-WH - Rack Shelf.

From steel to aluminum, plastic to fiberglass, the Bud line of enclosures and racks is the most extensive and often the most affordable.  Shelves are one-piece, 16-gauge steel with flanged front and rear to support up to 200 lbs. All shelves come with necessary mounting hardware. Additional brackets are furnished to allow flexibility in mounting. Shelves allow sufficient room in rear for cables and power outlet strips. 

Racks & Rack Cabinet Accessories Non-Ventilated Shelf

19" White RAK Shelf 19" across x 19.25" deep and 0.75" high.

Unit Weight: 7.5 lbs.

Note: Orders over 5 lbs require additional shipping charge dependent upon destination.

Alternate P/Ns: Mouser 563-SH-2380, Newark 05M4595 

Learn More

Hardware, knob. For splined shaft 0.215" - 0.225". Material: plastic. Dimensions: 0.212" (5.6mm) to 0.235 (6.0mm) at base ID and 0.404" (10.2mm) at the top and 0.451" (11.4mm) OD base. The knob has a solid center with a sunken area in the top, approximately 1/8" deep. Color: Light gray. Learn More

Hardware, knob. For 1/4" shaft, with two set screws. Knurled grip, with position indicator. No center cover. Dimensions: 18mm D x 19mm high. Color: gray.

Learn More

SIFAM - SP211-125 - Hardware, Knobs.

For 1/8" shaft, with Indicator, 21mm.

No Cap Insert.

Dimensions: Overall Body is 0.833 inch OD x 0.676 inch tall.

Color: Gray.

Learn More

EDWARDS SIGNALING PRODUCTS - 349 Hardware, Enclosure.

The 349 is a weatherproof Mounting Box is perfect for mounting a variety of Edwards signaling appliances such as bells, horns and sirens. It is made from die-cast aluminum and finished at the factory with a baked sage gray enamel finish.

• Rugged Die-Cast aluminum

• Tapped for 3/4" (19 mm) conduit

• Molded neoprene gasket

• Corrosion resistant finish.

Back Mounting Box.

Construction: Rugged Die-Cast Aluminum 

For Edwards Signaling 340 6" or 10" Adaptahorns.

Color: Gray.

Size 6-1/2 Inch Diameter X 1-5/8 Inch Width

Applications: Fits 6”, & 10” 340, 435, 439D, 5520 Series Bells, Duotronic horn/siren

UL Listed for outdoor use.

More info: http://www.edwards-signals.com/index.cfm?pid=185

UPC: 782640242001

Alternate: Newark 92F6379

Learn More

ACME - 6-007 Hardware, Knobs. For slide Potentiometers, Equlizers, Mixers, Bass Heads.

Press-Fit.

Material: Plastic, Black with a White Stripe Indicator.

Dimensions: 0.75" wide x 0.5" with ID of 0.1 x 0.26" maximum.

Vintage New Old Stock

Package of 4

Learn More

Hardware, dial. For rotary switches with a 1/8" half flattened shaft. Material: plastic. Marked 1 through 8. Color: white. Note: Perfect fit for Grayhill switch 031-0413-00, our SKU 1682, not included. Learn More

Hardware, knob. For 0.185" D shaft. Spring-clip. Marked: Increase / Set Point. Dimensions: 1-1/8" D x 0.525" high. Color: gray. Package of 5. Learn More

Enclosure. NEMA 12. Material: steel, gray. Dimensions: 4 x 4 x 3. Junction box. Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. Provides a degree of protection from falling dirt, dust, oil and water. Learn More

HOFFMAN - A403 - Heavy Duty Enclosure. Weatherproof Electrical Junction Box

Status: Discontinued - Similar to A403DSC

Seams Continuously Welded and Ground Smooth

Nema 4 Wall Mount (IP65)

Complete with inside Cover Rubber Seal.

Oil-Resistant Gasket

Screw Cover

Wall Mount - Mounting Brackets have (4) slotted holes 2.0" Apart.

Material: Mild Steel 14 Gauge (0.083").

Color: Metallic Gray.

Internal Mount: Four 1/8" Tapped Mounting Holes

Approximate Overall Dimensions: W 3 5/64" X  L 4 15/32" x D 2 15/16".

A 0.675" Hole in One End and a 0.865" Hole in the Opposite End.

New Old Stock

Weight: 1 lb 8 Ounces without packing.

Applications: Typically utilized to protect a standard IT networking series of connection, automated electronics, or equipment used for transportation signal controls, phone and cable network distribution, and security or communications equipment.

Used to protect equipment in automation control or electronic system drives, this also includes the equipment used in packaging, material handling, and non-corrosive process control in manufacturing plants.

Alternate/Similar: Hammond 1414 SC, Similar to Hoffman's Current A403DSC 

Learn More

RITTAL CORP. - PK9519-000 - Enclosures.

Dimensions: 182mm x 180mm x 165mm.

Material: Polycarbonate plastic.

Gasket : Polyurethane.

Protection Class: IP66.

Color: Light Gray.

Alternate: Allied Stock 70476045

Learn More

Hardware, knob. For 1/4" flattened shaft. With red indicating line. Dimensions: 0.50"OD x 0.45" tall. Color: white. Package of 5. Learn More

Enclosure. Gray Nema Type 4x Fiberglass. NIB. No Subpanel. Dimensions: 20.19x20.25x8in.513x514x203mm.Specifications: Fiberglass-reinforced material has excellent temperature and chemical resistance qualities and exhibits outstanding physical properties. Hinged with Quick-release latch versions feature fiberglass-reinforced polyester latches with integral Type 316L stainless steel padlocking hasp Seams are sealed; no holes or knockouts. More info: http://www.hoffmanonline.com/stream_document.aspx?rRID=105042&pRID=4310 Learn More

HOFFMAN - MS-209 - Enclosure. Weatherproof Electrical Connector Junction Box

Seams Continuously Welded and Ground Smooth

3/4" to 1/2" Conduit Splice Adapter Box.

Complete with inside Cover Rubber Seal.

Oil-Rsistant Gasket

Screw Cover

Wall Mount

NEMA IP65

Material: Mild Steel.

Color: Metallic Gray.

Dimensions: Overall: 3.08" x 5.23".

Inside 2-3/4" x 4" x 2-1/2" deep, 0.085" thick.

Mounting Brackets have (4) slotted holes. A 0.68" hole in one end and a 0.867" hole in the Opposite end.

New Old Stock

Learn More

Gary Plastic Packaging Co. - 5-502 Enclosure.

Hinged project box.

Material: Plastic, White.

Dimensions: 7-1/16" long x 3-5/8" wide x 3/4" high.

Note: Same as our P/N: 5-502-1 SKU151452, except color.

Package of 3.

Learn More

EAO SWITCH - 61-9681.7 - Hardware, Knob. For switches.

Clear Plastic Housing, White Top.

Mount: Snap - on.

Dimensions: 0.942" (23.9mm) long x 0.706" (17.9mm) wide x 0.225" (5.7mm) high.

Learn More

Enclosure, utility cabinet. Dimensions: 6.25 long x 3.75" wide x 4.25" high (overall height is 4-7/16"). Material: steel. Color: gray. Note: Each side is removable. Learn More

Rak panel kit. Used with Models: C10, C20A, CAM, CSM, CFC-1. Material: Metal, gray. Panel dimensions: 19" (48.3cm) x 3-1/2" (22.2cm). Cotout: 11-7/16" (29cm) x 2-29/64" (6.2cm). Side panel depth: 6-13/32" (16.3cm). Learn More