Enclosure

Project Box Enclosure.

ideal solution for virtually any plastic project box application. Designed for indoor use, ABS cases are molded from high-quality, flame-retardant ABS plastic.

Black ABS Plastic Box with Mostly Transparent Cover.

Dimensions: 3.3"square 1.4"D overall OD, 3.0" square x 1.1"Deep ID.

One slot in the side for an RJ jack 0.56 x 0.68" and an oval hTransparent Coverole about 1.5" high in the back for mounting. 2.5 oz.

Learn More

MS-308 Enclosure.

Flange Mount with Lids.

Material: Sturdy Ridgid Plastic, Black.

Dimensions: 7.5" x 4.5" x 2.25" OD less 0.7" wide flanges with four mounting holes.

Metal inserts for seccuring front cover panel.

Box has irregular 1" x 1.16" hole for Molex connector or other exit and three 0.157" holes in bottom.

Learn More

Hardware, enclosure. Material: plastic. Dimensions: 2.4" wide x 1" deep x 4.6" high. Has one slot 1.9" x 0.1" in one end, and one mounting tab with 0.2" hole. Color: black. Complete with lid. Package of 2. Learn More

MS-232 Enclosure, Project Box.

Ribbed Box with Battery Compartment.

Material: Durable Plastic.

Dimensions: 4.9" long x 4.6" wide x 1.3" high with 3 mount feet.

Overall 6" wide with feet.

Color: Black.

Learn More

Russell - Hazel - BoxORC1 Enclosure.

Tool case with snap lid.

Material: Vinyl, slightly padded and reinforced.

Dimensions: 7 x 4 x 1" deep.

Application: For your keepsakes, small tools, replacement parts, etc.

Color: Black.

Learn More

TF-020215 Enclosure. Project box, without lid.

Dimensions: 1.85" long x 1.83" wide x 1.46" high.

Mounting ears each side.

Color: Black. No lids.

Learn More

Project Enclosure. Two part.

Material: Durable Plastic.

Dimensions: 5.5" x 4.5" x 1.75".

Two long mounting holes, small 1.6" wide access slot in rear 0.3" high.

Color: Black.

Learn More

new SHIPPING CONTAINER with nice black foam inside. OD: 23"w x 20"d x 14"h Learn More

0270062-03 Extruded Aluminum U-channel with cover.

Dimensions: 5.2" long x 2" wide x 2.5" deep.

The aluminum is 0.068" in thickness.

There are no holes or cut-outs except for 2-56 tapped holes in end corners.

The covers are natural aluminum, brushed and Black Anodized. 

Learn More

Enclosure. Material steel. Dimensions: approximately 17.5" long x 8.5" high x 7.0" deep. Color: black. Learn More

PACTEC -71894-510-000 - LH64-130-000 - Universal Enclosure. LH Series

The LH series is a family of desktop enclosures with a wide range of sizes. The LH housings have robust flush panels and slightly radiused sides. Applications Include: Network Equipment, Test Equipment, Medical Devices, Scientific Instruments

Material: ABS Plastic (Acrylonitrile Butadiene Styrene)

Color: Black

Flammability Rating: UL 94 HB

Dimensions: 107 mm L x 155 mm W x 38.1 mm H (4.2" x 6.1" x 1.5")

Unit Weight: 9.439312 oz

Four (4) piece set = top, bottom, rear and front panel.

Separate panel part numbers: Top 71572-01. Bottom 71573-01. Rear and Front 71884-02-028.

Military ICN #: 92853-501000.

Internal standoffs in bottom and top for PCB-mount.

Vertical slots in top about 3/8-inch behind front and back panel slots for vertical PCB's.

Top and bottom are held together by two 4 x 1/2" sheet metal screws (included) with bottom access.

 

 

Learn More

MIDWEST SERVICE - 9-085 Enclosure.

Project box.

Material: plastic, black and reads, "The Force".

Dimensions: 2-13/16" long x 2-1/4" wide x 1' High. Plus 2 mount feet with 3-1/3" centers.

Has four small holes on top/in front.

The top fits directly on the base, and is snug.

Learn More

Enclosure. Bakelite box. Dimensions: 3-3/4" x 2-5/8" x 1-7/8" ID high. .Color: black.

Learn More

 8-043 Enclosures, Project Box.

Material: Plastic.

One semicircular hole about 11/16" x 3/8" for wires.

Bottom plate lifts off with five pins holding it securely in place.

Inside dimensions 2-3/4" square x 1-1/4" deep.

Two mounting flanges on opposite sides of bottom, mounts on 3-1/4" centers.

Color: Black.

Package of 2.

Learn More