Enclosure

Plast-A-Matic - Project Box Enclosure.

Instrument Enclosure, 2 piece top & bottom.

Snaps together, requires 4 screws (not included).

Front panel would be approximately 5.25"wide x 2.5" tall (not included).

Material: Plastic.

Actual Dimensions: 138 x 71 x 130mm deep.

Color: Gray.

Learn More

Project Box Enclosure.

ideal solution for virtually any plastic project box application. Designed for indoor use, ABS cases are molded from high-quality, flame-retardant ABS plastic.

Black ABS Plastic Box with Mostly Transparent Cover.

Dimensions: 3.3"square 1.4"D overall OD, 3.0" square x 1.1"Deep ID.

One slot in the side for an RJ jack 0.56 x 0.68" and an oval hTransparent Coverole about 1.5" high in the back for mounting. 2.5 oz.

Learn More

MS-308 Enclosure.

Flange Mount with Lids.

Material: Sturdy Ridgid Plastic, Black.

Dimensions: 7.5" x 4.5" x 2.25" OD less 0.7" wide flanges with four mounting holes.

Metal inserts for seccuring front cover panel.

Box has irregular 1" x 1.16" hole for Molex connector or other exit and three 0.157" holes in bottom.

Learn More

Hardware, enclosure. Material: plastic. Dimensions: 2.4" wide x 1" deep x 4.6" high. Has one slot 1.9" x 0.1" in one end, and one mounting tab with 0.2" hole. Color: black. Complete with lid. Package of 2. Learn More

Gencon Plastic - MS-232 - Enclosure, Ribbed Project Box, 4.9"x4.6"x1.3" ABS Plastic.

Acorn-Gencon® Plastics provides complete injection-molded product solutions from concept to completion. Engineered design services combined with complete manufacturing capabilities ensure the best project production flow from concept to completion.

Ribbed Box with Battery Compartment.

Material: Durable Plastic.

Shape: Slightly Rectangular

Material: ABS Plastic

Dimensions: 4.9" Long x 4.6" Wide x 1.3" High with 3 Mount Feet.

Overall 6" Wide with Feet.

Removeable Slide Section 

Color: Glossy Black.

Applications: Suitable for Electronics

New Old Stock - Made in USA

Note: Screws not included

Learn More

Russell - Hazel - BoxORC1 Enclosure.

Tool case with snap lid.

Material: Vinyl, slightly padded and reinforced.

Dimensions: 7 x 4 x 1" deep.

Application: For your keepsakes, small tools, replacement parts, etc.

Color: Black.

Learn More

HOFFMAN - 6960B - wall Mount Steel Enclosure.

Heavy Duty.

Material: Mild Steel.

Seams continuously welded and ground smooth.

Four Internal Weldnuts provided for mounting optional panels or terminal block kits.

External Mount: 4-hole wall mounting flange 0.75" wide on each end (4) - 7/8" conduit holes, two on one long side, one at either end. Steel thickness: 0.085".

Approximate Dimensions: 8" wide x 10.0" high x 4.00" deep. (ID: 7-3/4" x 8-3/4" x 3-7/8" high).

Color: Gray.

Application: Ideal for a broad range of applications, the enclosure’s screw cover is not included but would have been secured in each corner for a positive seal but easily removed. 

Note: Does not include Screw-on Cover.

Note: Enclosure are very heavy and require additional shipping charges dependent upon destintation. 

Learn More

TF-020215 Enclosure. Project box, without lid.

Dimensions: 1.85" long x 1.83" wide x 1.46" high.

Mounting ears each side.

Color: Black. No lids.

Learn More

Project Enclosure. Two part.

Material: Durable Plastic.

Dimensions: 5.5" x 4.5" x 1.75".

Two long mounting holes, small 1.6" wide access slot in rear 0.3" high.

Color: Black.

Learn More

EDWARDS SIGNALING PRODUCTS - 349 Hardware, Enclosure.

The 349 is a weatherproof Mounting Box is perfect for mounting a variety of Edwards signaling appliances such as bells, horns and sirens. It is made from die-cast aluminum and finished at the factory with a baked sage gray enamel finish.

• Rugged Die-Cast aluminum

• Tapped for 3/4" (19 mm) conduit

• Molded neoprene gasket

• Corrosion resistant finish.

Back Mounting Box.

Construction: Rugged Die-Cast Aluminum 

For Edwards Signaling 340 6" or 10" Adaptahorns.

Color: Gray.

Size 6-1/2 Inch Diameter X 1-5/8 Inch Width

Applications: Fits 6”, & 10” 340, 435, 439D, 5520 Series Bells, Duotronic horn/siren

UL Listed for outdoor use.

More info: http://www.edwards-signals.com/index.cfm?pid=185

UPC: 782640242001

Alternate: Newark 92F6379

Learn More

new SHIPPING CONTAINER with nice black foam inside. OD: 23"w x 20"d x 14"h Learn More

0270062-03 Extruded Aluminum U-channel with cover.

Dimensions: 5.2" long x 2" wide x 2.5" deep.

The aluminum is 0.068" in thickness.

There are no holes or cut-outs except for 2-56 tapped holes in end corners.

The covers are natural aluminum, brushed and Black Anodized. 

Learn More

Enclosure. NEMA 12. Material: steel, gray. Dimensions: 4 x 4 x 3. Junction box. Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. Provides a degree of protection from falling dirt, dust, oil and water. Learn More

HOFFMAN - A403 - Heavy Duty Enclosure. Weatherproof Electrical Junction Box

Status: Discontinued - Similar to A403DSC

Seams Continuously Welded and Ground Smooth

Nema 4 Wall Mount (IP65)

Complete with inside Cover Rubber Seal.

Oil-Resistant Gasket

Screw Cover

Wall Mount - Mounting Brackets have (4) slotted holes 2.0" Apart.

Material: Mild Steel 14 Gauge (0.083").

Color: Metallic Gray.

Internal Mount: Four 1/8" Tapped Mounting Holes

Approximate Overall Dimensions: W 3 5/64" X  L 4 15/32" x D 2 15/16".

A 0.675" Hole in One End and a 0.865" Hole in the Opposite End.

New Old Stock

Weight: 1 lb 8 Ounces without packing.

Applications: Typically utilized to protect a standard IT networking series of connection, automated electronics, or equipment used for transportation signal controls, phone and cable network distribution, and security or communications equipment.

Used to protect equipment in automation control or electronic system drives, this also includes the equipment used in packaging, material handling, and non-corrosive process control in manufacturing plants.

Alternate/Similar: Hammond 1414 SC, Similar to Hoffman's Current A403DSC 

Learn More

Enclosure. Material steel. Dimensions: approximately 17.5" long x 8.5" high x 7.0" deep. Color: black. Learn More

RITTAL CORP. - PK9519-000 - Enclosures.

Dimensions: 182mm x 180mm x 165mm.

Material: Polycarbonate plastic.

Gasket : Polyurethane.

Protection Class: IP66.

Color: Light Gray.

Alternate: Allied Stock 70476045

Learn More

PACTEC -71894-510-000 - LH64-130-000 - Universal Enclosure. LH Series

The LH series is a family of desktop enclosures with a wide range of sizes. The LH housings have robust flush panels and slightly radiused sides. Applications Include: Network Equipment, Test Equipment, Medical Devices, Scientific Instruments

Material: ABS Plastic (Acrylonitrile Butadiene Styrene)

Color: Black

Flammability Rating: UL 94 HB

Dimensions: 107 mm L x 155 mm W x 38.1 mm H (4.2" x 6.1" x 1.5")

Unit Weight: 9.439312 oz

Four (4) piece set = top, bottom, rear and front panel.

Separate panel part numbers: Top 71572-01. Bottom 71573-01. Rear and Front 71884-02-028.

Military ICN #: 92853-501000.

Internal standoffs in bottom and top for PCB-mount.

Vertical slots in top about 3/8-inch behind front and back panel slots for vertical PCB's.

Top and bottom are held together by two 4 x 1/2" sheet metal screws (included) with bottom access.

 

 

Learn More

MIDWEST SERVICE - 9-085 Enclosure.

Project box.

Material: plastic, black and reads, "The Force".

Dimensions: 2-13/16" long x 2-1/4" wide x 1' High. Plus 2 mount feet with 3-1/3" centers.

Has four small holes on top/in front.

The top fits directly on the base, and is snug.

Learn More

Enclosure. Gray Nema Type 4x Fiberglass. NIB. No Subpanel. Dimensions: 20.19x20.25x8in.513x514x203mm.Specifications: Fiberglass-reinforced material has excellent temperature and chemical resistance qualities and exhibits outstanding physical properties. Hinged with Quick-release latch versions feature fiberglass-reinforced polyester latches with integral Type 316L stainless steel padlocking hasp Seams are sealed; no holes or knockouts. More info: http://www.hoffmanonline.com/stream_document.aspx?rRID=105042&pRID=4310 Learn More

HOFFMAN - MS-209 - Enclosure. Weatherproof Electrical Connector Junction Box

Seams Continuously Welded and Ground Smooth

3/4" to 1/2" Conduit Splice Adapter Box.

Complete with inside Cover Rubber Seal.

Oil-Rsistant Gasket

Screw Cover

Wall Mount

NEMA IP65

Material: Mild Steel.

Color: Metallic Gray.

Dimensions: Overall: 3.08" x 5.23".

Inside 2-3/4" x 4" x 2-1/2" deep, 0.085" thick.

Mounting Brackets have (4) slotted holes. A 0.68" hole in one end and a 0.867" hole in the Opposite end.

New Old Stock

Learn More

Enclosure. Bakelite box. Dimensions: 3-3/4" x 2-5/8" x 1-7/8" ID high. .Color: black.

Learn More

Enclosure, utility cabinet. Dimensions: 6.25 long x 3.75" wide x 4.25" high (overall height is 4-7/16"). Material: steel. Color: gray. Note: Each side is removable. Learn More

Rak panel kit. Used with Models: C10, C20A, CAM, CSM, CFC-1. Material: Metal, gray. Panel dimensions: 19" (48.3cm) x 3-1/2" (22.2cm). Cotout: 11-7/16" (29cm) x 2-29/64" (6.2cm). Side panel depth: 6-13/32" (16.3cm). Learn More

 8-043 Enclosures, Project Box.

Material: Plastic.

One semicircular hole about 11/16" x 3/8" for wires.

Bottom plate lifts off with five pins holding it securely in place.

Inside dimensions 2-3/4" square x 1-1/4" deep.

Two mounting flanges on opposite sides of bottom, mounts on 3-1/4" centers.

Color: Black.

Package of 2.

Learn More