Heat Sinks

202-297 - Hardware, Heatsink For TO-220 Components, Package of 10.

10 Fin.

Material: Aluminum, Black Anodized.

Vertical Mount.

Fin Style: Radial

Thermal Resistance: 7.5°C/W

Fin Style, Extruded Radial

Dimensions: 1.18" x 1"wide x 0.5" high.

Pre-drilled for devise with one 0.15" / 3.8mm hole, bottom is flat, no tabs or nubs.

Package of 10.

Alternate: HSS-B20-NPS-01, Aavid Thermalloy 507302B00000G, 01M6666

Learn More

Aavid Thermalloy - 2228B - NSN 5999-00-873-3812 - TO-39 / TO-5 Heatsink.

Low cost, easily installed, push-on heat sink. This device may be installed after assembly and takes up little additional board space.

Passive heat sink with 3 cooling fins for increased thermal performance

For TO-39 or TO-5 components.

Thermal Resistance: 40 C/W  - 3.0 Watt

Material: Black Anodized Aluminum.

Nominal Dimensions: 0.75" D x 0.4" high. (22.23mm x 13.49mm)

RoHS Compliant

NSN 5999-00-873-3812

Material Document and Classification: QQ-A-225/6 fed spec single material response

Surface Treatment Document and Classification MIL-A-8625, type 2, class 2 mil spec single treatment response.

Alternates: 078907-0001, 1205-0213, 1205-0213, 166267-1, 352-9619-110, 3522 500 23261, 505413, 802099-003, G03920

Replacement for NTE401

Similar to 322805B0000 

New Old Stock

Learn More

Thermalloy/Aavid - 507222B00000 - Hardware, heatsink.

For two TO-220 Components.

Dewscription: 12 Fin.

Material: Black Anodized Aluminum.

Dimensions: 1.47 x 1.75" x 0.38" tall (37.4mmL x 44.5mmW x 9.7mm).

Vertical or horizontal Mount. 

Thermal Resistance: 9.6 C / W.

Power dissipation 8W @ 70 Degree C.

Rohs Compliant.

More info: www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=507222b00000g

Rohs Compliant

Cross Reference: 6072B, Digi-Key HS114-ND

 

Learn More

Thermalloy Aavid - THM6054B-SE1 - 6054B - Hardware Heatsink for TO-3 Transistors and other Components.

Black, Anodized aluminum.

Dimensions: 45.8mm (1.806") square x 32.2mm (1.271") tall

20-fins, 5 each side. ID 1.67" and has (2) 6/32 threaded rivets on bottom.

Learn More

Thermalloy/Aavid - 531202B02500 Hardware, Heatsink.

Heat Sinks Extruded Heat Sink, Notch Base, TO202, Radial Fin, Vertical, 7.5C/W, 2.67mm Hole

TO-202 Package 7.00 C/W Thermal Resistance Heat Sink with Radial Fins

For TO-220 Components.

Natural convectiopn Thermal resistance: 7.5

Black Anodized.

Vertical Mount.

Dimensions: 2" tall, 0.5" thick x 1.4" wide.

Two 2.5mm pins 1" apart. Other Aavid P/N is 6100B.

 

Learn More

Unidentified MFG - PT-584 - TO-220

Bolt-On Mountable

Black Anodized Aluminum Heatsink

Dimensions: Overall 1.635" wide + 1"deep + 0.710" off board.

Alternates / Similar: ATS-PCBT1094, PSC2T2CB, PSC22CB, 574502B03200G, 574502B00000G, HSS-B20-NP-02, HSS-B20-074H

Learn More

Hardware, Heatsink.

Status: Discontinued

Assembly consists of With (2) attached Hybrid Voltage Regulators, SH323KC TO-3 Steel, 2 Bridge Rectifiers, TO-3 Sockets, TO-3 Insulator Caps, Large Heat Sink.

Positive 5V 3Amp 50Watt.

Overload Protected

Internal Short Circuit Protection

Material: Nice Black Anodized Aluminum 

Heat Sink Dimensions: 6-1/2" x 3-3/4".

Used/Removed from New Old Stock Chromascan Equipment.

Alternates: NTE931, LM323K, SK9067, SG323

Applications: Great parts for Regulator Projects 

Learn More

AAVID Thermalloy - 5925 - TO-220 Heat Sink - Series 5925

PCB mount for TO-220 Single Gauge devices, Transistors/SCrs, Etc...

Mounting Style: Through Hole   

Heatsink Material: Aluminum Anodized    

Fin Style: Twisted Fin     

Natural Thermal Resistance: 22 C/W 

Dimensions: L 6.35 mm, Width:  22.2 mm, H: 31.75 mm 

Color: Black        

Alternates: 042005, 592502B03400G            

Unit Weight: 0.098767 oz

Learn More

Hardware, heatsink. For TO-3 components. Black. 8 Fin. Dimensions: 4-1/16" long x 3" wide x 1" high, rectangular. Learn More

Thermalloy/Aavid - 534202B03453 Heatsink.

For TO-220, TO-218 or TO-247 components.

Mounting Style: Through Hole

Heat Sink Matewrial: Aluminum

Color: Black

More info: http://www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=534202b03453g

Learn More

Thermalloy Aavid - THM6054 - 505403B00000G - Hardware, Heatsink for TO-3 Transistors and other components.

Material: Black Anodized Aluminum, Thin. 

With five 1" Fins per side.

Thermal Resistance: 6.00

Square Basket Heat Sink featuring Straight Fins

Dimensions: 1.78" square x 1.25" high. (45.21mm X 31.75mm)

Mount centers: 1-3/16".

New Old Stock

Learn More

CTS IERC - UPI-TO3B - Hardware, Heatsink for TO-3 Devices.

UP1 Series for TO-3 Outline and Stud Mount Devices.

Natural Conv. (°C/W): 10.4

Forced Air (°C/W): 3.2

Black Anodized Aluminum.

Dimensions: 1.78" square x 0.50" high, with 5-staggared fins each of four sides.

Vintage - New Old Stock

Learn More

CONCORD - 12-14255-04 Hardware, Heatsink.

Aluminum Extrusion with Ten Cooling Fins

Heatsink with fasteners for Two - TO-3 Device (Transistor, Diodes, Voltage Regulators, SCRs, LEDs, etc.)

Dimensions: 3.306" long x 1.758" wide x 1.810" high.

Mount centers: 2.962".

Marked THM 12-14255-05.

Heavy Duty

9

Learn More

Wakefield Engineering - 690-3B - Hardware, Heatsink.

These low-cost heat sinks provide the most power dissipation at the lowest unit cost and are
available in three standard types to mount and cool one TO-3 or TO-66 metal power semiconductor type or two plastic package TO-220 power semiconductor types.

For TO-3 & TO-66 Components.

Material: Aluminum.

Color: Black Aanodized.

Mount: SMD.

Dimensions: 1.839" wide x 1.852" deep x 1.310" high.

Alternate: Mouser 567-690-3B

Learn More

Thermalloy Aavid - THM6073 - 507302B00000G - Hardware, Heatsink

Economy, narrow base, low profile channel style heat sink is perfect for use on printed circuit boards with 0.500 inch centering. When mounted horizontally, the total height of the heat sink is just 0.380

Heatsinks for TO-220 black 3/4" x 3/4" and 7/8" deep (19X19X9MM)

TO-220 & SCR mounting

Additional Information http://www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=507302j00000g

Learn More

Thermalloy/Aavid - 529802B02500 Heatsink.

Extruded 5290 is a series of dual radial board level heat sinks designed to cool TO‐218, TO‐220, and TO‐247 devices.

Status: Discontinued

For one TO-220 type component.

Material: Aluminum, Black Anodized.

Mount: bolt on or PCB vertical with pins.

Dimensions: 41.91mm x 25.40mm x 38.1mm (1.5") high.

Power Dissipation @ Temperature Rise10W @ 50C.

Thermal Resistance @ Forced Air Flow 3.0C/W @ 200 LFM.

Thermal Resistance @ Natural 3.7C/W.

Learn More

Heatsink. For TO-220 components. Mounting clip. Fin type: channel. Material: Tin plate, copper. hermal Resistance: 28.3 C / W. Dimensions: 13.08mm long x 13.21mm wide x 19.81mm high. Learn More

Thermalloy Aavid - 6015B - Hardware, Heatsink for TO-3 Transistors and other devices.

4 Fins each side of a diamond shape.

Material: Black Anodized Aluminum.

Dimensions: 47.5mm long x 35.8mm wide x 25.2mm high.

New Old Stock

Learn More

Thermalloy/Aavid - 577102B00000 - Heatsink.

For TO-220 components.

Material: Anodized Aluminum.

Dimensions: 0.752" (19.1mm) high x 0.520" (13.2mm) wide x 0.390" (9.9mm) deep. 5 Fin each side.

Color: Black.

Package of 10.

Learn More

Hardware, heatsink. For TO-220 components. Material: anodized aluminum. Mount: vertical. Dimensions: 0.75 x 0.25". More info: http://www.aavid.com/products/standard/577002b00000g Learn More

Heatsink. For TO-220 components. Material: anodized aluminum. Dimensions: 0.714" high x 1.00" wide x 0.50" deep. 3 Fins each side. Color: black. Note: Alt P/N: 6107B-14.

Learn More

Hardware, heatsink. For TO-220 components. 3 Fins each side. Material: anodized aluminum. Mount: horizontal. Dimensions: 25.4mm long x 18.2mm deep x 12.7mm high. ID is 22.9mm long x 18.0mm deep x 11.6mm high. Note: Alt P/N: 6107B-14. More info: http://www.aavid.com/products/standard/530714b00000g Learn More

Thermalloy/Aavid - 2225B - 322505B00000G - Hardware, Heatsink.

Case/Package: TO-39 or TO-5  

Material: Black Anodized Aluminium, Anodized

Mount: Press Fit - 2 Fin

Shape Fins, Rectangular: Technical

Natural Thermal Resistance: 35 °C/W

Thermal Resistance: 56 C/W

Thermal Resistance @ Forced Air Flow (100 LFM): 20 °C/W

Dimensions: Diameter - 8.0264 mm, Height-12.7 mm,

Height Off-Base-10.16 mm, Length- 19.05 mm, Width- 19.05 mm

Dimensions: 0.755" D x 0.398" high.

Alternate:322505B00000G, AAV322505B00000G.

Learn More

Thermalloy/Aavid - 2226B Heatsink.

For TO-5, TO-39 components.

Single fin. Snap-on, press-fit.

Meterial: anodized, black.

Dimensions: 19.2mm OD x 6.2mm high (overall) x 0.8mm thick.

Alternate P/N: BP7-10.

More info: http://www.thermalloy.com/products/standard/322605b00000g

Learn More