Knobs

DAKA-WARE - Davis Molding - 197267A1 - Hardware Fluted Finger Grip Knob.

Heavy Duty Knob for 1/4" (6.35mm) - 28 Shaft.

Twelve Flute Knob

Material: Compression Molded Phenolic (Bakelite)

Stronger & More Durable than Plastic

Color: Black 

Approximate Dimensions: 1.750" OD x 1.015" Depth With 0.075 Pilot Diameter

Molded-In Brass Insert threaded 1/4" - 28 over 0.50" Deep

Genuine Vintage DAKA-WARE - New Old Stock

Made in Chicago USA

 

Learn More

DAKA-WARE - Davis Molding - DAK-P1105-27 - 1914-AS - Hardware, Instrument Knob.

For 1/8" (6.35 mm) shaft, with set screw.

Eight Knurled/Raised/ Ribbed Edges for ease of gripping.

Material: Compression Molded Phenolic Knobs

Black with Silver/Brushed Aluminum Tone Face and pointer.

Dimensions: 0.745"OD x 0.487" high. (21-30 mm)

New Old Stock

Made in Chicago USA

Lot of 2

Learn More

Hardware, Slider Knobs.

For Slide Potentiometers.

For Shaft: 0.159" x 0.060" thick.

Material: Plastic, Black with Silver Top.

With Tiny Pointer on one side.

Dimensions: 0.635" long x 0.390" deep x 0.521" high.

Package of 10.

Learn More

GOULD - 00457313 - Hardware, Knob/Cap.

For pushbutton switches.

Rectangular cap/knob.

Material: PVC, gray.

Dimensions: 7.0 x 2.5mm in front, 8.6x4.0mm flange at back.

ID is approximately 5.1 x 1.5mm.

Package of 10

Learn More

Hardware, knobs. Slide pot knobs. Color: white. Dimensions: 9.8mm wide (0.387") x 5.5mm (0.219") deep x 11.1mm (0.438") high. Red and Black are available also. Note: I actually thick these knobs are better suited for P/B switch banks. They will fit a shaft 3.6mm x 2.4mm, but will sit parallel to slide pot. Package of 10. Learn More

Hardware, knobs. For potentiometers/trimpots, flat style. Color: white. Package of 10. Note: Perfect fit for our P/N: MS-022, SKU 5942 pot, not included. Learn More

Hardware, knobs. For potentiometers/trimpots, flat style. Color: white. Package of 10. Note: Perfect fit for our P/N: MS-022, SKU 5942 pot, not included. Learn More

Hardware, knob. For switch banks with a square 1/8" shaft. material: plastic. Dimensions: 0.29" D x 0.272" high. Color: white. Package of 5. Note: Perfect fit for a switch bank like our SKU 1772, not included. Learn More

Hardware, Dial Knob.

Shaft Diameter 1/4".

Shaft not Flush with Knob.

Dimensions: 7/8" wide x 1/2" high.

Color: Black.

Package of 4 pot knobs.

Learn More

Hardware, knob. Snap-on. Dimensions: 0.5" square x 0.214" high. Color: beige. Package of 25. Learn More

Hardware, knob. Three triangular control surfaces. For 1/4" half flattened shaft. Material: plastic. Dimensions: 0.76"OD x 0.7" tall. Color: black. Package of 10. Learn More

ACME - 6-007 Hardware, Knobs. For slide Potentiometers, Equlizers, Mixers, Bass Heads.

Press-Fit.

Material: Plastic, Black with a White Stripe Indicator.

Dimensions: 0.75" wide x 0.5" with ID of 0.1 x 0.26" maximum.

Vintage New Old Stock

Package of 4

Learn More

Hardware, knob. Button caps, knurled. Socket head cap screw. Snap-on. Material: plastic. Dimensions: 16.1mm D x 4.4mm high. Overall height is 6.3mm. Color: red. Package of 10. Learn More

Hardware, Knob/CAP/Button.

For pushbutton switches with a square shaft 0.189".

Dimensions: 1/2" square x 0.396" high.

Color: Black.

Package of 10.

Learn More

Hardware, Knob/Cap/COver. For Slide Switches.

Overall Exterior Dimenasions: 0.615" Length X 0.298" Width X 0.385" Height

Top Swith Portion Dimensions: 0.325" Lenght X 0.200" Width X 0.150" Height

Shaft Size: 0.200" Length x 0.125" Width X 0.135" Depth, Stepped where Deeper Rectagular slot is 0.150" X 0.078".

Material: Thermoplastic.

Color: Black.

Shape: Retangular

Package of 8.

Learn More

Hardware, knob. For 0.185" D shaft. Spring-clip. Marked: Increase / Set Point. Dimensions: 1-1/8" D x 0.525" high. Color: gray. Package of 5. Learn More

Hardware, knob. For 1/4" flattened shaft. With red indicating line. Dimensions: 0.50"OD x 0.45" tall. Color: white. Package of 5. Learn More

Custom - 8-482-3 - Hardware, Knobs/Caps.

Slide pot knobs.

Color: black.

Dimensions: 12mm wide (0.472") x6mm (0.236") tall x 11mm (0.433") deep.

Red and White are available also.

These knobs are better suited for P/B switch banks.

They will fit a shaft 3.6mm x 2.4mm, but will sit parallel to slide pot.

Package of 10.

Learn More

Hardware, knobs. Slide pot knobs. Color: red. Dimensions: 11.9mm wide (0.471") x 5.5mm (0.223") deep x 10.9mm (0.431") high. Red and White are available also. Note: I actually think these knobs are better suited for P/B switch banks. They will fit a shaft 3.6mm x 2.4mm, but will sit parallel to slide pot. Package of 10. Learn More