Other Hardware
- Mueller - BU-P3770-0 - Commercial Binding Post, Test Jack. Black Deluxe 5-Way Connector, Gold Plated Tellurium Copper.IN STOCK - MORE THAN 1,000 READY TO SHIP!
Mueller - BU-P3770-0 - Commerical Binding Post, Test Jack. Black Deluxe 5-Way Connector, Gold Plated Tellurium Copper.
Binding posts are used to make quick attachments with test lead wire, connecting them to electronic test instruments. One common design for binding posts is called a universal or five-way style. This style allows for the joining of multiple types of connectors such as unshrouded or retractable 4mm banana plugs, bare wire, or spade, pin connectors, uninsulated wire, and more. Tellurium copper reduces EMF noise for a cleaner signal.
Head Style: Knurled
Termination: Threaded and Turret
Termination Thread: 8-32
Current Rating (Amps): 15 A
Voltage: Hands-free testing to 2500 VRMS
Contact Material: Tellurium Copper, Gold Plated
Plating: Gold
Color: Black
Cross Hole Diameter: 0.096" (2.43mm)
Head Size: 0.440" OD (11.18mm)
Material – Insulation: Polycarbonate (PC)
Nut Material: Brass, Gold Plated
Panel Thickness: 0.070" ~ 0.250" (1.77mm ~ 6.35mm)
Temperature: -50 C to 115 C (-58 F to 239 F)
RoHS 3 Compliant
Alternates: Digi-Key 314-1200-ND, Mouser 548-BU-P3770-0, Allied 70272537, Pomona 3770, Pomona 3750, Keystone 4097, Keystone 7017, S-H266H, 004136, BU-P3750-0, DS-BU-P3770, BP21B, Abbatron 1517, 1514, 6937K62
Applications: Special Effects Equipment, Analytical Instruments, Test Equipment, Loudspeakers, Audio Amplifiers
- TACTEC - Stickyone - PT-041 - Phenolic Isulation Board. Package of 25.IN STOCK - MORE THAN 5,000 READY TO SHIP!
Tactec - Stickyone - PT-041 - Phenolic Insulation Board.
Phenolic Insulation Boards Phenolic insulation boards are the most effective type of rigid insulation boards currently available. Phenolic insulation board is manufactured by a process in which a plastic foam forms an insulating core between two flexible facing layers.
Excellent Insulation and thermal Properties.
8 x 3"/ Thin 0.011" / 0.2mm phenolic board (tan/orange) used as insulation / circuit board protection in hand held radios and other items requiring insulation.
Has 6 notches cut out of it, about 1/2" wide.
Package of 25.
Learn More - Motorola - MNT62312B1 - Hardware, Pole / Post Mount Bracket with Two U-Bolts, Lock Washers and Nuts.IN STOCK - MORE THAN 500 READY TO SHIP!
Motorola - MNT62312B1 Antenna Mounting Hardware.
Status: Discontinued
Aluminum Direct Post Mounting Bracket.
Right-Angle 2-5/8" Wide x 4-3/8" Long with 1 -1/8" Diameter Hole.
Base has with four 1/2" x 1/4" slots
U-Bolts for 1 1/2" Diameter Pipe
Two 2" x 3", U-Bolts Threaded 1/4"-20 with Lock Washers and Nuts,
Zinc-plated steel U-bolts have good corrosion resistance in most environments.
Quality Motorola Product.
Application: Motorola MNT62312B1 bracket for gcntm20a3a and others.
Weight: 0.5 lbs.
Note: Commonly sold as an option with various Motorola antennas such as GPS Timing and Tetra Mobile Antennas.
- BIRD - 5-1357-3 - Connector, Electronics Solder Eyelet, Rivet/Eyelet/Terminal. Package of 100.
BIRD - 5-1357-3 Connector, Electronic Solder Eyelet, Rivet/Eyelet/Terminal.
Electronic eyelets are flanged tubular metal conductors inserted into a printed circuit board. They make electrical continuity between the circuitry on both sides of the board, and are an attachment point for soldering component leads.
Type: Solder.
Appears to be Silver Plated Brass (High thermal and electrical conductivity)
Metric Dimensions: Outside lip is 6.1mm OD, 2.9mm ID with a shaft 3.5mm round and 6.7mm tall under Lip.
Inch Dimensions: Outside lip is 0.240" OD, 0.114" ID with a shaft 0.138" round and 0.264" tall under Lip.
Applications: Secure High Current Electrical and Ground Connections or repairs to chassis and PWBs.
Chose the proper eyelet keeping the following in mind:
LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of PCB(this allows the for the right length after the flange is formed)
ID Eyelet inside diameter should be 0.003-0.020”/0.075-0.500mm greater than the component lead diameter for proper fit of the eyelet through-hole component lead.
FD The flange diameter should be sized so that it does not protrude out onto other pads or conductors in the vicinity
OD The clearance in the PCB hole should allow the eyelet to be inserted without undue force but, but should not exceed 0.125mm greater than the eyelet outside diameter.Additional Information: http://www.intl-eyelets.com/short_course_on_electronic_eyelets.htm
Genuine Vintage Bird Electronics Hardware - New Old Stock
Package of 100.
Learn More - Unidentified MFG - 8-436 - Steel Lanyard Tethers, Vinyl Coated. 36" Length.
Steel Lanyard Tethers, Vinyl Coated.
Tethers, also called lanyards, are simple metal or composite cables with loops at each end. They can be attached to any object for added security and are frequently used in the commercial and agricultural industry to provide attachment between a pin and its mating part to minimize lost hardware.
Overall 35-3/8" Length Hole-to-Hole
Mounting Loop and Swivel Hangar
Tough.
With Clear Jacket 0.063" / 1.5mm OD. (1/16")
Applications: GoPro Camera Lanyard. Secure cables and adapters in boardrooms, workstations and other areas to help prevent against costly theft or accidental loss.
Learn More - SOUTHCO - 6-302 - Hardware, Magnetic Door Latch.
SOUTHCO - 6-302 - Hardware, Magnetic Door Latch.
Gain a lot of flexibility in applications where you can use these magnetic fastening latches instead of mechanically actuated latches. They are spring loaded for added versativity, are great for light or heavy sheet metal doors and enclosures, tolerate misalignment, and can even be used with non-metallic enclosures by adding a steel strike plate.
A heavy duty magnet 1.23" long x 0.36" thick including steel sides, with a heavy duty spring loaded push button 0.3"square that will push your door open when you push on it.
Will require a mating 1/4" or larger steel tab on door cabinet, when pushed the magnet pulls back.
Dimensions: 3" long x 1" x 0.5" thick.
Materal: Tough Polypropylene
Mounts with two slots approximately 2.7" apart.
Note: Spring loaded to push open.
New Old Stock
Learn More - ANSELL AlphaTec SOL-VEX - 37-175 11 - 15 Mil Gloves, Green Nitrile. Size 11. Package of 12 Pr.Special Price $16.98 Regular Price $29.95READY TO SHIP - ONLY 36 LEFT IN STOCK!
ANSELL AlpaTec SOL-VEX - 37-175-11 - 15 Mil Gloves, green Nitrile. Size11. Package of 12 Pr.
Applications: Chemical Plants and Transportation, Chemical Processing, Oil Refining and Petrochemicals, Cleaning and Degreasing, Exposure to Chemicals, Solvents, Hazardous Liquids, PVC Cements or Standing Water, Janitorial and Maintenance Work
Gloves, Green Nitrile. Size: 11.
Flock-lined, Straight cuff.
Sandpatch Grip Design.
12 - 13" Length.
15.00 mil Thickness. ANSI/ISEA Puncture Level: 3
Industry Standards: ANSI 0 (Cut), EN388 3101, EN374 AKL, EN374 Micro, FDA 21 CFR 177.2600
High performance Nitrile - Reliable chemical protection. Reduced chemical burns and caustic exposure. Puncture and abrasion protection. Reduced hand injuries. Cotton flock liner - Moisture absorption, Reduced dermatitis and increased comfort.
Component Materials Comply with 21 Cfr 177.2600 for Food Contact
Marked: For protection against OTTO Fuels.
USDA Accepted. FSN: 8415-01-147-6263.
Package of 12 Pr.
Learn More - PICKER INTERNATIONAL - 189564 - Hardware, Plexiglass/Acrylic Sheet . 4.5" x 4.5" x 0.5."
Picker International - Marconi - 189564 Hardware, Plexiglass / Acrylic Sheet.
Shatter-resistent or lightweight alternative for glass.
Plexiglas sheet is an excellent electrical insulator with a high dielectric constant.
More Heat thermal shock resisant than glass but also has thermal movement 8 times higher than glass.
Dimensions: 4.5" Square x 0.5" thick.
Clear.
Former Application Manufacturer of advanced medical diagnostic imaging systems.
Learn More - LORD MANUF. - 204PHC18-100 - Rubber Anti-vibration Isolator Cup Shock Mount 3".Special Price $5.98 Regular Price $12.50IN STOCK - MORE THAN 100 READY TO SHIP!
LORD MANUFACTURING. - 204PHC18 -100 Hardware, Shock Mount.
Size: 3" square.
Mount: Threaded 5/16" Hole.
Material: Rubber and Steel.
Learn More - BUD INDUSTRIES - 60-2380-WH - 3/4'' Tall White 19'' Rack Shelf
BUD INDUSTRIES - 60-2380-WH - Rack Shelf.
From steel to aluminum, plastic to fiberglass, the Bud line of enclosures and racks is the most extensive and often the most affordable. Shelves are one-piece, 16-gauge steel with flanged front and rear to support up to 200 lbs. All shelves come with necessary mounting hardware. Additional brackets are furnished to allow flexibility in mounting. Shelves allow sufficient room in rear for cables and power outlet strips.
Racks & Rack Cabinet Accessories Non-Ventilated Shelf
19" White RAK Shelf 19" across x 19.25" deep and 0.75" high.
Unit Weight: 7.5 lbs.
Note: Orders over 5 lbs require additional shipping charge dependent upon destination.
Alternate P/Ns: Mouser 563-SH-2380, Newark 05M4595
Learn More - FMC - Anaconda Flexcon - 5-183 - Stainless Steel Flexible Conduit, Spiral Interlock, 1 Inch Outer Diameter.IN STOCK - MORE THAN 100 READY TO SHIP!
FMC - Anaconda Flexcon - Stainless Steel Flexible Conduit, Spiral Interlock, 1 Inch Outer Diameter.
VA single metal strip is loosely double interlock-wound to create an extremely flexible interlocked metal hose.
Rust and corrosion resistant due to chromium content.
Superior durability and strength.
Smooth interior for easy wire pulling.
Extremely flexible for easy installation.
Excellent crush proof qualities.
Withstand approximately 750 degrees F.
Excellent toughness even to low temperatures.
Good forming and welding properties.
For Dry locations.
Dimensions: 1" D x 15.5" long.
Contracted length is 12 1/2".
Inside Diameter: 0.850", Outer Diameter of end fitting: 1.075"
Bending radius 4".
Extremely well suited to protect wiring.
Used for heating elements, thermocouples, automotive,communications, robotics, and aircraft industries.
High Quality - New Old Stock - Bulk Packaged
Note: See SKU 5840 for THOMAS & BETTS - 78-6210-05234 - 5234-TB - Connector for connecting to Box.
Learn More - Warner Electric - ECM 550-DISC-KIT - (5)412-0027 and (6)412-0026Special Price $149.98 Regular Price $250.00Out of stock
Warner Electric - ECM 550-DISC-KIT - Disc. Kit.
Sets of (Five Quantity): 412-0027 and (Six Quantity): 412-0026.
Learn More - Unidentified MFG - PT-241 - HARDWARE PACKET$3.00HARDWARE PACKET with 8 pcs 1 1/2 inch. long #8 philip head screws & 8pcs. #8a speed nut. Learn More
- Unidentified MFG - 00383-91-20008 - MS-034 - Hardware, Handle. Equipment Handle/Strap.
Hardware, Strap Handle.
Heavy Duty Equipment Handle/Strap.
Material: Plastic/Rubber.
Flexible. Dimensions: 1" wide x 6" long.
With Metal/Zinc Support Ends.
Overall length: 7-3/4" long.
P/N: 00383-91-20008.
NOTE: We do NOT include screw harware for mounting.
Alternate/Similar: Reliable Hardware Company RH-0585-A
Learn More - Unidentified MFG - 8-002 - Hardware, Roller. Mounted on a SS bracket.IN STOCK - MORE THAN 100 READY TO SHIP!
Hardware, Roller.
Mounted on a stainless steel bracket with 2 holes 0.625" (15.8mm) centers.
Dimensions: Overall 1.240" (31.5mm) wide x 1.163" (29.5mm) high, including roller.
Applications: Mechanical Projects, Robotics,
Very nice.
Learn More - Unidentified MFG - 8-648 - Hardware, Ceiling Light and/or Fan Pull String. Package of 10.
Hardware. Pull String for Ceiling Lights and/or Ceiling Fans.
Length: 34" Braided String
Chain Connect on One End, Bell Style Brass Pull on Other.
Alternate: Midwest Fastener 64633, SATCO 90/1034, Jandorf 60313Vintage - New Old Stock
Package of 10.
Learn More - Nielsen Hardware - 112-11 -Series Chest Handle - Recessed Chest Handle, Spring Loaded. Pull-Up-To-Grasp. Heavy DutyREADY TO SHIP - ONLY 8 LEFT IN STOCK!
Nielsen Hardware - 112-11 -Series Chest Handle - Steel Formed Grip Chest Handle with Retun Spring.
Nielson's most popular chest handle. These are used regularly for tack and other wooden box applications. The bail stops at 90° when lifting and incorporates two return springs to assure that the bail returns to the recessed position.
Recessed Handle, Spring Loaded.
Pull-Up-To-Grasp.
Material: Steel, Chrome Plated.
Mount: 3 holes with 2-1/16" centers.
Steel Formed Contoured Handle for comfort
Dimensions: Mount Plate 5.00" Long x 3.64" High x 0.564" Depth.
Weight: Over 10 Ounces Each
Perfect for Large Heavy Tool Chest, Commercial Speaker Cabinets, Flight Cases, Heavy Tool Cases or other application requiring a strond durable handle.
Made in USA - New Old Stock
Alternate: Chineese Alternate Replacement HA1121STCZ130, Part #:32855892
- Unidentified MFG - 9-089 - Italian White Marble. 3" Square.Special Price $0.98 Regular Price $1.50Out of stock
Italian White Marble.
Dimensions: 2.975" long x 3.018" wide x 0.750" high.
Application: A very nice paper weight, or material for crafts or carving.
Learn More - Southco - 84-29-101-10 - Coupler, Lock Nut Fractional Turn Fastener, 3-pc 0.25'' x 0.20''
Southco - 84-29-101-10 - Coupler.
1/4 Turn
Knurled Type Head
Lock Nut Fractional Turn Fastener
1-set contins 3-pieces
2-Plastic 1-Rubber
0.3'' long x 0.4" D x Expandable 0.20" ID.
Alternate: SOU84-29-101-10
RoHS Compliant
Learn More - SDP/SI - A6R6-110012 - Hardware, Timing Belt.
SDP/SI - A6R6-110012 - Hardware, Timing Belt.
Resistance to dirt, grease, oil, and moisture. Polyurethane has excellent abrasion resistance, so these belts don’t create dust while they runIt has fiberglass tensile cords for strength, durability, and resistance to elongation, and it has a polyurethane tooth facing for quieter operation and resistance to wear.
Pitch: 0.0816" (40D.P.).
Number of Grooves/Teeth: 110.
Width: 1/8" (0.125") 3mm
Material: Polyurethane.
Tension Member: Fiberglass.
Pitch Length: 8.98" (228.092mm).
Single Sided.
Learn More - ROBINSON AVIATION - K166-8D - Hardware, Shock Vibration Isolation Spring Mount. 0.19" ID Hole.IN STOCK - MORE THAN 100 READY TO SHIP!
ROBINSON AVIATION - K166-8D Hardware, Shock Vibration Isolation Spring Mount, Metallic Dampener.
Anti-Vibration Compression Spring Mount
0.19" ID Hole.
Spring Supported
Flange-Mount on 1.385" Centers.
Mounting Hole Diameter: 0.138
Learn More - LORD MANUF. - 150PH14-18 - J-2049 - Hardware, Rubber Vanti-Vibration Isolator Cup Shock Mount.Special Price $2.98 Regular Price $5.95Out of stock
LORD MANUF. - 150PH14-18 - J-2049 - Hardware, Rubber Anti-Vibration Isolator Cup Shock Mount, Platform Mount.
LORD Plateform Mounts provide effective isolation against vibration. The contour of the fl exing element was developed to provide uniform stress distribution.
Hardware, Shock Mount, Cup Style
Mount Resilient Wea
With Steel Housing, 2-5/8" (Mount).
Old Stock
Alternate: 5342-00-959-0679
Learn More - ITW - 4041-00-5075 U-41 - Rubber Bumpers/Feet, Self-Adhesive. Sheet of 105 Pieces Total.Special Price $4.98 Regular Price $8.50READY TO SHIP - ONLY 96 LEFT IN STOCK!
ITW - 4041-00-5075 U-41 - Rubber Bumpers/Feet, Self-adhesive. 1 Sheet
High quality molded rubber Bumper stops are used on thousands of different applications and are made in various shapes and sizes to suit the needs of our customers. These crack-resistant, non-skid bumper pads do not contain plasticizers, oils or fillers. Additionally, they will not mar, scratch, or stain any surface. These bumpers feature an acrylic-based adhesive for long-term adhesion that has excellent solvent and ultraviolet resistance and have high shear strength.
- Abrasion resistant
- Excellent resistance to skidding and coefficient of friction
- Vibration and shock dampening
- Crack-resistant and resilient
- UL-recognized
Each Sheet contains a total of 105 Bumpers = 30 and 75 Self-adhesive Black PVC Round Bumpers
Dimensions: 30 Pieces 0.30" Diameter Tapered, 0.200" High and 75 Pieces Round, Dome Shaped 0.25" Diameter 0.085" High.
Not prepunched, must be cut out of sheet (Approximately 6" x 3").
One sheet of 105 Pieces.
Suggested Applications: Project boxes, under computers desktop calculators keyboards telephones and speakers to prevent vibration skidding or marring surfaces, under cutting boards to prevent skidding, crafts projects and many other uses.
Proudly Made in USA
Learn More - HILTI - 00306636 - Hardware. CLH Series 3/4" Copper Swivel Ring Hangers, Clevis Loop Hanger.READY TO SHIP - ONLY 85 LEFT IN STOCK!
HILTI - 00306636 - Hardware. CLH Series 3/4" Copper Swivel Ring Hangers, Clevis Loop Hanger.
Sprinkler Pipe Hanger
Hilti CLH Series 3/4" Copper plated hangers.
Recommended for suspension of non-insulated stationary copper tube.- Pre-assembled insert nut on hanger
- Can be installed with one hand: pipe and pipe ring don't have to be swivelled around when screwing onto the threaded rod 3/8"-16
- No special nut required
- System approved / listed by VdS, FM and UL
Difficult to find in Copper plated with Hilti quality