Other Hardware
- Mueller Electric Co - BU-60 Series - Hardware, Alligator Clips. 10 Amp. Package of 25.Special Price $4.98 Regular Price $7.00IN STOCK - MORE THAN 100 READY TO SHIP!
Mueller Electric Co - BU-60 series Hardware, Alligator Clips.
Jaw Opening: 0.310" (7.87mm)
Current Rating (Amps): 10A
Material: Steel
Plating: Nickel
Insulation: Non-Insulated
Color: Natural
Length: 1.970" (50.04mm)
Termination: Crimp or Solder
Note: May have a bit of "RUST" from moisture during storage.
Compatible with all shrouded, unshrouded, or retractable 0.16" (4mm) banana plugs, solder or crimp connection, jaw opens 0.31" (7.9 mm) max.
Material: Nickel-plated steel (BU-60).
Length: 1.97" (50mm).
Package of 25.
Learn More - UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Cushioned Loop Clamp, 3/4" ID.
UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Hardware, Cable Clamps.
Cushioned Loop Clamp, 3/4" to 11/64" ID.
Tongue Hole Type, Oil Resistant.
Distance from loop center to tongue end: 1.0".
Center to center distance between loop and mounting hole: 0.781".
Overall width: 0.500".
Material: Steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material Thickness: 0.032".
Military NSN 5340-00-050-2740.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
Price for One Clamp, Discounted for quantity purchases of 6 & 60.
Learn More - SPC Technology Multicomp - SPC15319 - MBP159 - Connector, Binding Post Un-Insulated. Nickel Plated Brass.
SPC Technology Multicomp - SPC15319 - MBP159 - Connector, Binding Post.
The SPC15319/ MBP159 Binding Post made of nickel-plated brass. This binding post features single-wire connection, screw contact termination and ideal for panel mounting. Accepts 14AWG wires.Commercial Quality - Compression Style
Contact Ampacity: 15 Amp.
Insulation Material: Non-insulated.
Accepts 14 AWG Wire
Contact Plating: Bright Nickel Plated Brass Head and Body.
Mount: Panel Mount
Outside Dimensions: 10mm Diameter,.
Length: 14.30 Closed, 18.80mm Height Extended.
Note: Knurled Knob Screw Actuation. 2.8 x 4.7mm slot for wires.
Mounts from bottom with 6/32 screw (Not Included/ Purchased Separately).
RoHS Compliant
Alternate: Newark 79K4913, 159 HH SMITH
Applications: Instrumentation, Speakers, Laboratory Breadboarding.
Made in Taiwan.
- GENERAL DEVICES - C300S-114 - Chassis-Trak telescoping slidesSpecial Price $14.95 Regular Price $55.00Out of stock1 Pair of Telescoping Rack Cabinet slides LENGTH:14" OVERALL LENGTH: 29" Non-Pivoting Solid Bearing WITH HARDWARE Learn More
- Accuride - C133-12D - Ball Bearing 12" SLIDE ASSEMBLY$9.00IN STOCK - MORE THAN 100 READY TO SHIP!
12-Inch long overall. 8.4" Slide Travel Up to 30-pound Weight Bearing.Set consists of (2) zinc electroplated ball-bearing slides and (4) right angle metal brackets and (x) a bunch of screws. Weighs about 2pounds / set. Instruction sheet said "Concealed hinge flipper door slide." Eurpoean hinges Not Included.
Learn More - Unidentified MFG - PT-590 - Wire Nuts and Fastener Mounting Kit.IN STOCK - MORE THAN 1,000 READY TO SHIP!
Hardware. Wire Nut Set and Fastener Mounting Kit.
Each kit includes - Minimum 3 wire nuts plus 8 #6 Sheet Metal Screws 5/8" long and 8 Tinnerman Speed/Spring Nuts.
Applications: Mounting Speakers, or similar replaceable items.
Proudly Made in USA
Learn More - Leviton - 13351 - Lampholders/Tombstones. Medium G13 Base T8/T10/T12 Bi-pin. LED/Fluorescent Package of 2.Special Price $1.98 Regular Price $3.00IN STOCK - MORE THAN 100 READY TO SHIP!
Leviton - 13351 - Lampholders/Tombstones.
This Leviton T8 or T12 low profile lamp holder is for use with fluorescent lamps having a medium bi-pin base.
Non-shunted Bi-pin Lamp Holders/Tombstones.
Low Profile, Slide-On, Snap-On, or Bolt-On Mount.
Quickwire 18AWG Solid or Str Tinned.
For T8 LED Replacement and all T8/T10/T12 Fluorescent lamps, 600V 660 watt.
Listed: UL/CSA.
UPC: 041175370918
Package of 2.
Learn More - EECO - 4-063 - Hardware, Adjustable Leveler Leg / Mount. 6/32 x 5/8". Package of 10.
EECO - 4-063 Hardware, Screw. Adjustable Leveler Leg / Mount / Dress Screw.
May be used as a Leveling Foot.
Material: Decroative Aluminum.
Dimensions: 3/4" Diameter
Recessed Head, 6/32 Thread X Stem Length 5/8" Long (Plate Fastener).
Applications: Instrumentation,
Package of 10.
Learn More - CUSTOM - COPPERTEX-B - Copper Finger Shielding Stock/Gasket/Strips. EMI/RFI Shielding Solution, Package of 5.IN STOCK - MORE THAN 100 READY TO SHIP!
CUSTOM - COPPERTEX-B - Copper Finger Shielding Stock/Gasket/Strips.
Beryllium Copper (BeCu) is a high performance metal which can be fabricated into a wide variety of components. Its mechanical and electrical properties make it the ideal material for EMI/RFI shielding products.
EMI/RFI Shielding Solution - Gasket Strip
- Excellent electrical and RF conductivity
- High tensile strength
- High shielding effectiveness
- Superb resistance to corrosion
- Very long lifespan
- Easy installation
- Numerous plating options
- Excellent performance at high temperatures
- Moisture and UV resistant
Berllium Copper Finger Stock - 0.15 x 0.40 x 4.25"L, 44 fingers.
Reverse Bend Spherical Shape
Similar Alternate: Tech Etch 93R1D
New Old Stock
Package of 5.
Learn More - 3M Scotchlok™ 567 - 7000005879 - Self-Stripping Electrical Tap Connectors - Package of 10
3M Scotchlok™ 567 - 7000005879 - Self-Stripping Electrical Tap Connectors - Package of 10
Self-Stripping Electrical Connector (as manufactured by 3M, part No. 567) capable of connecting a tap wire 18-14 AWG solid or stranded copper to a run wire solid or stranded copper. Connector shall be UL Listed and CSA Certified for 600 volts maximum, building wire: 1000 volts maximum, signs, fixtures and luminaires, and temperature rated 105˚C maximum.
Quick, Reliable Splices are a Snap. And a Squeeze.Scotchlock IDC S/LOK Connector Tap & Parallel.
Electrical IDC 567-Pouch Self Stripping.
Termination: IDC Crimp
Insulation: Fully Insulated
Insulator Material: Polypropylene
Terminal Material: Brass
Wire Size: 18-14 AWG.
: 1.5mm²
Maximum Insulation: 0.145" (3,68 mm) Tap, 0.190" (4,82 mm) Run
Max. Current: 18 AWG - 7 AMPS, 16 AWG - 10 AMPS, 14 AWG-15 AMPS, 12 AWG-20 AMPS, 10 AWG-25 AMPS.
Operating Temperature: 105°C (221°F)
Color: Brown.
Features: Flame Retardant, Hinged Lid(s)
Scotchlok, 600V.
Approvals: UL, CSA
Packaging: Bulk
RoHS Compliant
Package of 10.
Alternates: Newark 57AC5188, Digi-Key 3M157375-ND, Gardner Bender 15-2210, IDC 567
UPC 054007148876
Made in USA
Learn More - LFC - LFCPIN-1IN-1/4IN - 1/4 X 1 Inch Clevis Pin, Steel Heat Treated Pin with Zinc -Yellow Chromate Plated Finish. Package of 10.
LFC - LFCPIN-1IN-1/4IN - 1/4 X 1 Inch Clevis Pin, Steel Heat TreatedPin with Zinc -Yellow Chromate Plated Finish.
1/4" (0.250) Diameter, 13/16" Usable Length, 1.00" Overall Length
Max Cotter Pin 1/16”
Package of 10.
Learn More - SPC Tech. Amerlok - MPCS-4 - 8000-03 - Snap-in Circuit Board Spacers 1/4" Stand-offs. Package of 100READY TO SHIP - ONLY 47 LEFT IN STOCK!
SPC Tech, Amerlok - MPCS-4 - Snap-in Circuit Board Spacers 1/4" Stand-offs.
Circuit Board Support Stand-Off / Locking Circuit Board Supports.
Snap-in Locking.
Material: Nylon 6/6.
Color: Natural.
Dimensions: 1/4" (6.4mm) Board Spacing/Panel Separation with top 0.156" and bottom 0.187".
RoHS Compliant
Alternates: LCBS-4-01, TRLCBS-4-01, DTRLCBS-4-1
- Unidentified MFG - PT-417 - Hardware, Feet or Bumper. Compression Stem Push-in Rubber Feet. Package of 24.Special Price $2.49 Regular Price $3.50READY TO SHIP - ONLY 76 LEFT IN STOCK!
Hardware, feet. Compression Stem Push-in Rubber Feet.
The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These foot/bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.
Shape: Round
Diameter: 0.500", Overall Height: 0.340, Foot Height; 0.165"
Fits: 1/4" Hole
Also can serve as a bumper or idiot plug for 0.250" hole.
Material: Rubber.
Operating Temperature: -20 to 180 F
Reduces vibration, isolates and prevents movement.
Applications: Ideal for electronics cabinets, test equipment, enclosures, or projects.
Package of 24.
Learn More - Unidentified MFG - PT-244 - Hardware, hinges. Package of 10.Special Price $4.98 Regular Price $9.50READY TO SHIP - ONLY 20 LEFT IN STOCK!Hardware, hinges. For cabinets or enclosures. Dimensions: 1-3/4" x 2". Package of 10. Learn More
- Unidentified MFG - MS-276 - Wire holders. PCB, snap-in. Package of 50.Special Price $3.00 Regular Price $3.50Hardware. Wire holders. Material: plastic, white. Mount: PCB, snap-in. Dimensions: 0.612" long x 0.220" wide x approximately 0.835" above board. Note: Snap clip. Package of 50. Learn More
- Bakelite - MS-026 - Hardware. Hollow True Bakelite Tube/Rod, 18" X 1/4" Rod. Package of 4.READY TO SHIP - ONLY 97 LEFT IN STOCK!
Hollow True Bakelite Tube/Rod.
Bakelite or polyoxybenzylmethylenglycolanhydride was the first plastic made from synthetic components. It is high resistance which make it a poor conductor of heat and electricity. Due to its hardness and strength it is widely used in switches, relays and connectors. Bakelite is little used in consumer products today due to the cost and complexity of its production and has become quite collectable in recent years.
Dimensions: 1/4" OD x 18" long, with an ID of 0.140".
Great project material. Widely used in electronics, power generation, antenna or various other industries. Insulate high voltage lines or cut to create high voltage stand-offs.
Industrial functional bakelite tubes for insulating, mounting, spacing electrical/electronic parts, wiring or assembles.
Material ranges in color from light brown to black with a flat or satin finish.
Vintage - New Old Stock
Package of 4.
Learn More - Unidentified MFG - 8-615 - Snap-In Solid Brass Hole/Panel Plug. From 1/2" to nearly 9/16" Diameter Holes.
Snap-In Metal Hole/Panel Plug.
Solid Brass hole plug creates a professional and finished appearance in a variety of applications. Formable tapered prongs snap into the hole to securely hold them in place.
Overall Head Diameter: 0.665", Depth 0.280"
Eight (8) Prongs can be Reformed
Plug for Approximately 0.50" up to 0.562" Diameter Holes.
Material: Bright Brass.
Material Thickness: 1/32" to 1/16"
Sometime referred to as Idiot Plug
New Old Stock - Proudly Made in USA
Alternate: D3161B
Applications: Electrical, Medical, Automotive, Marine, Instrumentation, Decorative.
Learn More - Unidentified MFG - 8-224 - Shoulder Insulating Spacer / Washers 3/16" ID. Package of 40.
Hardware. Shoulder / Insulating Spacer / Washer
Shoulder washers, sleeve bushings or flanged bushings are designed for a variety of applications. A shoulder washer insulates a screw, rivet or wire from a chassis or assembly. ... The flange on the bushing is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.
Shoulder Washers are designed to provide electric and heat insulation in assemblies where this is a crucial requirement. These products are self-lubricating and corrosion- and abrasion-resistant.
Size: # 8 Screws,
Dimensions: 0.560" OD x 0.170" ID x 0.260" Overall Thickness
Material: Hard Fiber, Nylon
Max. Temperature: 230F
Package of 40.
- Unidentified MFG - 8-150 - Phenolic/Fiber Tie Point/Turret/Connection/Wiring Strip Terminal Board. 10 Terminal, Dual 5 Position.IN STOCK - MORE THAN 1,000 READY TO SHIP!
Vintage Phenolic Bakelite Connector, Tie Point/Turret/Connection Board/Terminal/Wiring Strip.
5 Position Dual Row Turret Board
10 Terminals, Double Row of 5 each Turret Board.
Phenolic/Bakelite Fiber Board is 0.100" Thick.
Mount: Chassis Mount
Heavy Duty Turrets are Non-Magnet (Suspect Nickel Plated Brass)
Two 0.150" Diameter Mounting Holes Approximately 1.375" Apart
Dimensions: 2.36" Long x 1.14" Wide x0.46 High.
Vintage - New Old Stock - Bulk Packaged
Proudly Made in USA
Alternate/Similar Compoents: Keystone 15106, 15441, 15111
Applications: Repair / Restoration of Vintage Radio, HIFI, Amplifiers. Project Boards or Electronics Test Equipment.
- Polypro Lyle - BSR-1 - Parachute Buckle, Side Release 1 Inch Quick Snap PVC Buckles.IN STOCK - MORE THAN 100 READY TO SHIP!
Polypro Lyle - BSR-1 - Parachute Buckle, Side Release 1 Inch Quick Snap PVC Buckles.
REPLACE OLD BUCKLES: Suitable for any project using webbing or straps, these durable, plastic buckles are designed to offer fast and effortless, single handed adjustment, while their exceptional strength and smooth release action make it a great choice for any side-release application.
Hardware, belt hook 2-part, Male to Female
Material: Durable and Versatile PVC.
Matte Grey Finish
Size: Accepts 1" Wide Webbing
Strength: 277 pounds minimum
Dimensions: Overall Length Cliped together is 2.85", Width 1.30", Height 0.525"
Applications: Perfect for backpacks, survival bracelets, purses, tie-down straps, dog collars, belts, boats, bike racks, baby carriers, life jackets, waist or hammock straps and so much more, these quick snap, flat side, plastic buckles are a reliable and convenient choice for any serious crafter.
Note: Not load-bearing - Do not use for overhead lifting.
Priced for 1 Side Release and 1 Buckle
Learn More - TEKTRONIX - 213-0182-00 - Cap Screws, 1/4-20 x 1.343" Long. Stainless Steel, Package of 10.Special Price $5.98 Regular Price $8.50
TEKTRONIX - 213-0182-00 - Hardware.
- Socket cap screws generate tremendous clamping force
- Very strong socket head for maximum endurance
- Socket cap screws are great for tight spaces
Allen Hex Key, Stainless Steel
Cap Screws, 1/4-20 x 1.343" (34.1mm) long.
Threaded Area Length: 0.561" (14.2mm) long.
Plus Seat: 0.197" (5.0mm). Head 0.398" (10.1mm) D x 0.584" (14.8mm) long.
Package of 10.
Learn More - SOUTHCO - 97-67-103-15 - Over-Center Series Replacement Latch Keeper.Out of stock
SOUTHCO - 97-67-103-15 - Over-Center Series Replacement Latch
Southco Fixed Grip Draw Latches.
Over-center Draw Latch Large Size Concealed Keeper (two hole mount) Steel Powder Coat
Access Restriction: Pad Lockable.
Keeper Type: Concealed.
Keeper (Two Hole Mount).
Material: Steel, Black Powder Coated
Size Series: Large Size. 60 Series
Note: Latch Keeper Only- Does not include Latch Assembly (keeper only).
- ESSENTA RICHCO PLASTICS CO - LCBS-4-01 - Circuit Board Support Stand-offs.IN STOCK - MORE THAN 5,000 READY TO SHIP!
ESSENTA RICHCO PLASTICS CO - LCBS-4-01 Hardware, Spacer/Stand-offs.
Circuit Board Support Stand-Off / Locking Circuit Board Supports.
Snap-in Locking.
Material: Nylon 6/6.
Color: Natural.
Dimensions: 1/4" (6.4mm) Board Spacing/Panel Separation with top 0.156" and bottom 0.187".
RoHS Compliant
Alternates: TRLCBS-4-01, DTRLCBS-4-1, Mouser 144-LCBS-4-01, RP426-ND, Newark 28AH1212
- CAMLOC - 22T01-3-08-2BB - Hardware, Screw. Captive with Snap-InGrommet. Package of 10.
CAMLOC - 22T01-3-08-2BB - Hardware, Screw Fastener.
Captive screws front mount pan head with slotted recess.
All with Plastic Snap-InGrommet.
Will still maintain positive locking of the fastener under vibration.
Package of 10.
Learn More