Opto Display

Opto display. Alphanumeric 4 digit, 16 segment, bubble. Character height: 2.85mm. Color: red GaAsp. Package: 12 Dip. Learn More

IEE - LRT1704R Opto Display - 5 x 7 Alpha-Numeric Dot Matrix Display.

IEE has over 70 years of experience building custom military and industrial displays. 

The LDP-080705R is a retro red color 8 digit 5x7 (+ decimal) pixel LED matrix display. The module is based on eight LRT1704R display modules (equivalent the TIL307 display) and two TLC5920 from TI which allows all those LEDs to be controlled with only 7 microcontroller I/O lines.  Pixels can show as black (that is, completely unlit), or red.  Uses a standard HUB08 connection, so you can use the PLT-1001 driver boards to control it. Same display units as used in the classic SR-60 Programmable Calculator. 

Alphanumeric Alpha-Numeric Dot Matrix Display. LED, X-Y select.

One Character. - Bright/Low Power

Super Cute 7.62mm (0.300 in) High Characters.

Character Height: 8mm.

Peak Wavelength: 635nm.

Luminous Intensity: 450ucd.

Forward Voltage: 2.8V.

Forward Current: 20mA.

Color: Red.

Package: Dip.

Vintage New Old Stock - 1970s Vintage - Rare

Alternates: TIL305, LTP305R

Data Sheet: http://www.embeddedadventures.com/datasheets/LDP-3208S_hw_v2_doc_v1.pdf

 

Learn More

IEE - Industrial Electronic Engineers - LR1737R - IEE1737R- Opto Displays. Seven Segment LED.

Numeric L and R decimal, 0.3" Character Appearance, Red.

Wide Viewing Angle, High Contrast.

Standard 0.3" DIP Lead Configuration PCBoard or Socket Mountable 

Common Anode, RT and LT Hand Decimal

Peak wavelength (m)=655n.

Package: 11 Dip in a 14 Dip package.

New Old Stock

 

Learn More

General Instruments - MAN2815 - Opto Display.

The MAN2815 is an eight-character alpha-numeric display which is end-stackable and capable of displaying all alpha and numeric characters plus symbols. Each character is constructed from a monol ith ie, red GaAsP chip formated into a 14-segment font with a decimal point.

Low Power Consumption (As low as 0.5 mA average current or 1.0 mw per segment.)
• Aesthetically designed characters.
• Sculptured continuous segments.
• Complete Alpha-numerics plus special characters.
• Voltage and current compatibility for interfacing ease with microprocessors and related circuitry.
• 0.135" character height
• 0.175" character spacing allowing as much as 32 characters in 5.6" linear panel space.
• Common Cathode
• Internally wired for multiplexing.

Segmented Alphanumeric LED.

Eight (8) Characters, 14 segment, Common Cathode, Red.

Character Height: 3mm. (0.135")

Peak Wavelength: 660nm.

Luminous Intensity: 60 /Lcd @ 2.5 mA

Additional Information https://docs.google.com/document/d/1Jr7_KKxOSCWuI8DnalPyn5hXimJJKMCecVwquEf2ikg/edit

Package: 24 Dip.

Learn More

Opto Display. Eight (8) led strip. Seven (7) rectangular discreet leds and 1 bipolar led. Each led is 4.6mm x 2mm. Overall unit is 56.6mm wide x 19.5mm tall x 13.1 mm deep. Overall with leads 18.1mm deep. RA View, RA mount. From left: 4 red, one white bipolar, space 2 red, one yellow. Manuf: ACME of Japan. Learn More

National Semiconductor Corp - NSN507 Opto displays.

2 Digit, 7 segment,

0.7". CA.

Direct-drive, Red.

Case: Dual inline 20 pin, 2 rows, 0.100" spacing, rows 0.93" apart.

Package of 2.

Learn More

LED Light Bar - High Efficiency Red 5-PIN 9/16 X 5/16" (H) Series. LED DIP 5-pin Number LEDs in Array=2, Red 635nm V(F) Max.=2.8 , @20mA Iv Min. Luminous Intensity=3.8mcd @ I(F) =10mA, P(D)=75mW Learn More

Quality Technologies - Fairchild - FND367 Opto Display.

7 Segment Hi-Bright Red LED, 0.362".

Optoelectronic Device Type: 7 Segment Numeric LED Display

Color @ Wavelength: Red

Configuration: Common Cathode

Display Height: 9.0 mm

Forward Voltage-Max: 2.0 V

Number of Characters: 1.0

Operating Temperature: -25.0 C to 85

Terminal Finish: Tin/Lead (Sn/Pb)

Package: 10 Pin DIP.

Made in Korea

Vintage - New Old Stock

Commercial and Industrial Applications: Digital Clocks, Instrumentation, Controllers, MGV119 Project.

Note: Orginally Fairchild product design transferred to Quality Technologies

 

Learn More

Texas Instruments - TIL322P - Opto Display.

Seven Segment Numeric 0.5".

Color@Wavelength: Red

Display Height: 13.0 mm

Forward Voltage-Max: 2.0 V

Number of Characters: 1.0

Operating Temperature-Min: -25.0 C

Operating Temperature-Max: 85.0 C

CC RHDP.

Color: Red

Genuine Vintage Texas Instruments - New Old Stock

Package: 10 Pin Dip.

Learn More

Opto display. Dual 7 Segment display 0.5". Red. Prewired on 1.0 x 1.5" PC board with 4" flat flexible ribbon cable with ten PC pins. Common Anode. Learn More

General Electric - SSL-140 - LED Displays, Solid State Lamp (SSL) 

One of General Electric's most well-known displays, the SSL-140 is an early seven-segment LED in a tiny surface mount package. The SSL-140 is a single die device, in that all of the segments are constructed on the same lump of silicon. The display's decimal point is a separate small cubical die located in the right side of the display area. The SSL-140's dies are bonded to a ceramic wafer with gold leads, with an enclosing plastic cover to protect the fragile dies and bond wires.

Red 0.16" 7-Segment with Decimal Point

Common Cathod

20mA Max.

One of the Very First LED displays - built in Cleveland by General Electric at the original Nela Lamp Plant. Nela Park was the first industrial park in the world being home to most of the lighting breakthroughs of the last century. 

10 Gold Plated Leads

Standard 10 pin display. Long leads also serve as a heat sink to prevent damage to the plastic enclosure. 

The earliest LED’s, light emitting diodes, were produced in the early 1960’s. General Electric was one of the first companies to offer a visible light emitting diode in 1967. SSL LED Prices back than where between $4 and $32 apiece.

Genuine Vintage General Electric - New Old Stock - Very Rare - Own A piece of American Lighting History 

Proudly Made in USA

Learn More

Opto Display. 7 Segment numeric, 0.16". Red. Package: 10 Pin SMD. Dimensions: 0.4" x 0.22". Learn More

Texas Instruments Opto display.

Seven segment 0.3". CA RH and LHDP.

Color: Red:

Gold Leads

Package: 14 Dip, socket pulls.

Difficult/Rare to find TI Opto Display. Socket Pull

 

Learn More

LITRONIX SIEMENS - DL4770 Opto display.

Numeric LED 4 digit 7 segment. 0.28".

Common cathode.

Character height: 7mm.

Peak wavelength: 660nm.

Luminous intensity: 180ucd.

Dimensions: 1.26" long x 0.39" deep.

Color: red.

Package: 13 Dip. Series D and E.

Learn More

SIEMENS - DL2416 - Opto Display.

Alphanumeric 4 character, 16 segment, plus decimal.

Intelligent display with memory decoder/driver.

Magnified character 0.16 x 0.125, bubble.

Color: Red.

Alternate: DL2416T

Package: 18 Dip, New Old Stock

Learn More

SIEMENS - DLR2416 - Opto Display.

Alphanumeric 4 Character, 0.20" 5 x7 Dot Matrix, Plus Decimal.

Intelligent Display with Memory Decoder/Driver.

Color: Red.

Package: 18 Dip.

Series F.

Learn More

QUALITY TECHNOLOGIES - MAN6730 Opto display.

1-1/2 Digit, (7) segment, 0.56 inch.

Common anode, overflow +/- 1.8, right hand decimal.

Color: Red. 

Wave Length: 650 nm

Package: 18 DIP.

Series E. Quality Tech/GI.

Learn More

ITE-ON - LTC571HR Opto display.

Triple Digit 0.56" (14.2mm) 7 segment Numeric Display.

Series: J. common cathode, right hand decimal.

Color: High Efficiency Red.

Package: Dip.

Learn More

LITE-ON - LTC571HR Opto display.

Triple Digit 0.56" (14.2mm) 7 segment Numeric Display.

Series: J. common cathode, right hand decimal.

Color: High Efficiency Red.

Package: Dip.

Learn More

Opto display. 7 Segment, 10mm (0.39"). Common anode, right hand decimal point. Series K. Color: super red. Package: 10 Dip. Learn More

Opto display. Dual 7 numeric segment, 0.56". Series J1. CC, RHDP. Red face, red segments. Package: 18 Dip. Note: Series J1 or G2. Learn More

LITRONIX - DL750 Opto Display.

Status: Discontinued

Seven (7) Segment 0.6 inch. Common Cathode, Left Hand Decimal.

Current Rating: 0.240A

Nominal Voltage: 4.0V

Wavelength: 650 nm

Light Intensity: .70 mcd (megacandels)

Light Pipe Construction.

Color: Red.

Package: 18 Dip Configuraton 

Note: Test Dotted with a soldering iron by Manufacturer, no effects to the readability.

New Old Stock

Learn More

Bezel. Red lens. Dimensions: 77.8mm wide x 58.3mm high. Lens size: 52.6mm wide x 32.6mm high. Learn More

Bezel. Red lens. Dimensions: 43.2mm wide x 38.1mm high. Lens size: 29.8mm wide x 24.9mm high. Learn More