Opto Display

CAPSUL - 0706 - 3921C - Electroluminescent Panel Driver Inverter.

A power inverter for an electroluminescent device  enables the electroluminescent device to be powered from a low voltage DC power source. Switching transistors convert the low voltage DC power to AC power which is subsequently increased and coupled to a resonant circuit including the electroluminescent device. Current in the resonant circuit is sampled, referenced to half the low voltage DC power, and coupled back in phase to an amplifier and switching transistors to create an oscillator which oscillates at a frequency determined by the resonant circuit.

Input: 7.5VDC.

Output: 110VAC.

Connections; 0.25" Male QC Terminals.

Color: Blue.

Dimensions: 1.63" Long x 1.21" Wide x 1.147" High.

New Old Stock

Learn More

TECTROL - SP215 IC, VFD Driver Module.

Vacuum Fluorescent Display Driver.

Input: 6VDC.

Output: 30V at 250mA and 3.7VAC.

Package: Module 7-pin 2" square.

 

Learn More

Large Display Board 2 rows of 40 Characters (5x7) (Panaplex?) with DC/DC converter, 6-SED2020F drivers - removed from equipment Learn More

ISEDEN - DG10A / DG10C Gas-discharge tube with a 7 segment display.

A gas-filled tube, also commonly known as a discharge tube or formerly as a Plücker tube, is an arrangement of electrodes in a gas within an insulating, temperature-resistant envelope. Gas-filled tubes exploit phenomena related to electric discharge in gases and operate by ionizing the gas with an applied voltage sufficient to cause electrical conduction by the underlying phenomena of the Townsend discharge. A gas-discharge lamp is an electric light using a gas-filled tube; these include fluorescent lamps, metal-halide lamps, sodium-vapor lamps, and neon lights. Specialized gas-filled tubes such as krytrons, thyratrons, and ignitrons are used as switching devices in electric devices.

This flying lead display tube has color coded plastic sleeves on its leads, which makes it easier to wire than most VFD tubes. The tube is smaller than most, and digit height is 9mm.

Dimensions: 10mm D x 35mm tall with (12) 20mm wire leads.

Note: Iseden / Itron.

Made in Japan - Removed From Equipment - Rare

Learn More

KINGBRIGHT - DC56-11EWA Opto Display

2-Digit 7-Segment displays "M" Series or "L" Series.

Character Height: 14.22mm 0.56" Dual Digit Displays

Illumination Color: Red

Package: 18 Pin DIP

Number of Characters: 2

Element Configuration: Common Cathod

Forward Voltage: 2v

Test Current: 20 mA

Luminous Intensity: 2.4 mcd

Wavelength: 625 nm

Operating voltage: 2V

Max. Power Dissipation: 75 mW

Operating Temperature: -40 C to 85 C

Dimensions: Height 19.05 mm, Length 19.05 mm, Width 24.892 mm

 

Learn More

Bezel. Red lens. Dimensions: 77.8mm wide x 58.3mm high. Lens size: 52.6mm wide x 32.6mm high. Learn More

Bezel. Red lens. Dimensions: 43.2mm wide x 38.1mm high. Lens size: 29.8mm wide x 24.9mm high. Learn More

Bezel. Red Lens. Dimensions: 3-11/16" wide x 1-1/2" high. Lens size: 3-3/16" wide x 1' high. Learn More

IEE (Industrial Electronic Engineers) - DMH22463P-04 Bezel. Red Optical Lens Filter.

Dimensions: 2-11/16" wide x 1" high.

Lens size: 2-3/16" wide x 1/2" high.

Note: Used with DMH22464 Series Display Socket Stock #658-1130

Mfg Type DMH22464-04 that Holds 4 LED displays having width 2.74".

High End Equipment for Industrial / Commercial / Military

New Old Stock

NSN 6695-01-199-3258

 

Learn More

Bezel. Amber Lens. Dimensions: 2-3/16" wide x 1" high. Lens size: 1-11/16" wide x 1/2" high. Learn More

Bezel and Red optical filter for IEE. Dimensions: 9-7/16" wide x 2-3/4" high. Lens size: 8-5/16" wide x 1-11/16" high. Learn More

Bezel. Clear Lens. Dimensions: 7-3/4" wide x 2-5/16" high. Lens size: 6-3/4" wide x 1-1/4" high. Learn More

Bezel. Clear Lens. Dimensions: 6-1/4" wide x 2" high. Lens size: 5-1/4" wide x 1" high. Learn More

Bezel. Blue Lens. Dimensions: 6" wide x 2-3/4" high. Lens size: 5" wide x 1-11/16" high. Learn More

Agilent - Hewlett Packard - HDSP-0962 Opto Display.

Intelligent LED Display

Hexadecimal 4 x 7 dot matrix character.

Character height: 0.29 (7.4mm).

The numeric and hexadecimal devices incorporate an on-board IC that contains the data memory, decoder and display driver functions.

Supply voltage: 4.5 min to 5.5V max.

Color: Green.

Package: 8 Dip.

Used Perfect Socket Pulls, Very Clean.

Learn More

Board For Sale, with Twelve (12) DL2416T and Ten (10) DL3416. Note: DL2416 = Opto display. Alphanumeric 4 character, 16 segment, plus decimal. Intelligent display with memory decoder/driver. Magnified character 0.16� x 0.125�, bubble. Color: red. Package: 18 Dip. DL3416 = Opto Display. 4 Character alpha-numeric intelligent display. Package: 22 Dip, bubble. Great displays on a double-sided PCB; someone with proper equipment and experience can get them off the board for reuse. Learn More

IC, display driver. Dot/Bar. Display Type LCD, Vacuum Fluorescent, Digits or Characters:10 Steps, Current - Supply 6.1mA,Voltage - Supply 3 V to 20 V, Operating Temperature 0�C ~ 70�C.Case: 18 dip. Learn More

National Semiconductor - A5120 - 12-Digit Bubble Display 

First Generation LED Array 12-Digit 7-Segment Bubble Display

Pretty little gold plated circuit board with 22 thru-plated holes - you can see the microscopic wires going to the silicon under the bubbles.

Lens/Magnification: clear Bubble 1.5X

Intensity: 0.45 mcd @ 7mA

Dimensions: 60.8mm X 18.3mm

Rare 12 Digit LED Bubble Display 

Collector's Item Retro Display - 1970s Vintage

Genuine National Semiconductor - New Old Stock - Rare - Mint

Reportedly Used in privileg 884 ESR-E Manufactured by Rockwell

Learn More

Digital displays. Segmented alphanumeric LED, red, No. of digits/alpha:1, common anode RHDP, character size:14mm, 7.6 mm (0.3 inch). Luminous Intensity:0.8mcd, forward current:20mA, forward voltage:2.1V. Socket pulls/used. Learn More

Digital displays. Segmented Alphanumeric LED, red, No. of digits/alpha:1, character size:8mm, common anode, luminous intensity:1.115mcd, forward current:20mA, forward voltage:2.1V. Learn More