Opto Display

Opto display. Seven (7) segment 5V 15Amp glass display. Military NSN 5980-01-271-9925. Dimensions: 27.5mm wide x 16mm deep x 5.9mm high. Case: 13 pin in a 16 dip pkg. Learn More

IEE - LRT1704R Opto Display - 5 x 7 Alpha-Numeric Dot Matrix Display.

IEE has over 70 years of experience building custom military and industrial displays. 

The LDP-080705R is a retro red color 8 digit 5x7 (+ decimal) pixel LED matrix display. The module is based on eight LRT1704R display modules (equivalent the TIL307 display) and two TLC5920 from TI which allows all those LEDs to be controlled with only 7 microcontroller I/O lines.  Pixels can show as black (that is, completely unlit), or red.  Uses a standard HUB08 connection, so you can use the PLT-1001 driver boards to control it. Same display units as used in the classic SR-60 Programmable Calculator. 

Alphanumeric Alpha-Numeric Dot Matrix Display. LED, X-Y select.

One Character. - Bright/Low Power

Super Cute 7.62mm (0.300 in) High Characters.

Character Height: 8mm.

Peak Wavelength: 635nm.

Luminous Intensity: 450ucd.

Forward Voltage: 2.8V.

Forward Current: 20mA.

Color: Red.

Package: Dip.

Vintage New Old Stock - 1970s Vintage - Rare

Alternates: TIL305, LTP305R

Data Sheet: http://www.embeddedadventures.com/datasheets/LDP-3208S_hw_v2_doc_v1.pdf

 

Learn More

IEE - Industrial Electronic Engineers - LR1737R - IEE1737R- Opto Displays. Seven Segment LED.

Numeric L and R decimal, 0.3" Character Appearance, Red.

Wide Viewing Angle, High Contrast.

Standard 0.3" DIP Lead Configuration PCBoard or Socket Mountable 

Common Anode, RT and LT Hand Decimal

Peak wavelength (m)=655n.

Package: 11 Dip in a 14 Dip package.

New Old Stock

 

Learn More

General Instruments - MAN2815 - Opto Display.

The MAN2815 is an eight-character alpha-numeric display which is end-stackable and capable of displaying all alpha and numeric characters plus symbols. Each character is constructed from a monol ith ie, red GaAsP chip formated into a 14-segment font with a decimal point.

Low Power Consumption (As low as 0.5 mA average current or 1.0 mw per segment.)
• Aesthetically designed characters.
• Sculptured continuous segments.
• Complete Alpha-numerics plus special characters.
• Voltage and current compatibility for interfacing ease with microprocessors and related circuitry.
• 0.135" character height
• 0.175" character spacing allowing as much as 32 characters in 5.6" linear panel space.
• Common Cathode
• Internally wired for multiplexing.

Segmented Alphanumeric LED.

Eight (8) Characters, 14 segment, Common Cathode, Red.

Character Height: 3mm. (0.135")

Peak Wavelength: 660nm.

Luminous Intensity: 60 /Lcd @ 2.5 mA

Additional Information https://docs.google.com/document/d/1Jr7_KKxOSCWuI8DnalPyn5hXimJJKMCecVwquEf2ikg/edit

Package: 24 Dip.

Learn More

Citizen Watch Co - 92TA Backlight  Unit - Opto Display.

Normal color is an unobtrusive orange-pink, but when a 9V battery (or 6 - 12VDC) is applied it magically becomes a pinkish white. Bright enough to become the backlight for a citizen compact personal LCD TV. (Not included). 

Electro-Luminescent panel 9VDC.

Size: 1.5 x 2.0".

With internal 9V to High Voltage Inverter.

Overall dimensions: 2.75 x 2.8 x about 0.75" thick, the EL screen itself is very thin.

Applications: Perfect for signs, emergency lighting, special effects. Can also be used on 120VAC with out the inverter.

Note: When you look at it with the two electrical connections on top, the positive is on the left. Large Light !

Made in Japan

UPC 81514 00920

Learn More

Opto Display. Eight (8) led strip. Seven (7) rectangular discreet leds and 1 bipolar led. Each led is 4.6mm x 2mm. Overall unit is 56.6mm wide x 19.5mm tall x 13.1 mm deep. Overall with leads 18.1mm deep. RA View, RA mount. From left: 4 red, one white bipolar, space 2 red, one yellow. Manuf: ACME of Japan. Learn More

CAPSUL - 0706 - 3921C - Electroluminescent Panel Driver Inverter.

A power inverter for an electroluminescent device  enables the electroluminescent device to be powered from a low voltage DC power source. Switching transistors convert the low voltage DC power to AC power which is subsequently increased and coupled to a resonant circuit including the electroluminescent device. Current in the resonant circuit is sampled, referenced to half the low voltage DC power, and coupled back in phase to an amplifier and switching transistors to create an oscillator which oscillates at a frequency determined by the resonant circuit.

Input: 7.5VDC.

Output: 110VAC.

Connections; 0.25" Male QC Terminals.

Color: Blue.

Dimensions: 1.63" Long x 1.21" Wide x 1.147" High.

New Old Stock

Learn More

LCD, liquid crystal display. Has (4) NEC'8834 (date code) D7227G integrated circuits on the back, and a male 8 x 2 connector. Surface mount. Dimensions: Display 6" x 1-9/16". Board 8-9/16" long x 3-1/8" high. For hole mount with 8-1/2" centers. New. Note: No specification sheet available. Learn More

LED board. T-Ring II Protector. Each board has 6 SMD mounted LED(s), and two 24 position connectors to mate the ribbon cables. Each will come with two 24 conductor flexible 2" ribbon cable/connector. Dimensions: 3.042" long x 1.728" wide x 0.729" high including the four mounting spacers attached. Note: Hookup instructions not available. Learn More

NEC Corporation - FIP6A5 Fluorescent Opto Display.

Tube No.7F/2.

Package: 15 pin, glass.

Part Number: E2SF-N955-AA.

Appications: Used in ford premium sound digital radios mid 1980 's including mustang, thunder bird, Lincoln, bronco, and others.

Made in Japan

Learn More

LED Light Bar - High Efficiency Red 5-PIN 9/16 X 5/16" (H) Series. LED DIP 5-pin Number LEDs in Array=2, Red 635nm V(F) Max.=2.8 , @20mA Iv Min. Luminous Intensity=3.8mcd @ I(F) =10mA, P(D)=75mW Learn More

Quality Technologies - Fairchild - FND367 Opto Display.

7 Segment Hi-Bright Red LED, 0.362".

Optoelectronic Device Type: 7 Segment Numeric LED Display

Color @ Wavelength: Red

Configuration: Common Cathode

Display Height: 9.0 mm

Forward Voltage-Max: 2.0 V

Number of Characters: 1.0

Operating Temperature: -25.0 C to 85

Terminal Finish: Tin/Lead (Sn/Pb)

Package: 10 Pin DIP.

Made in Korea

Vintage - New Old Stock

Commercial and Industrial Applications: Digital Clocks, Instrumentation, Controllers, MGV119 Project.

Note: Orginally Fairchild product design transferred to Quality Technologies

 

Learn More

LCD Display 9 1/2" X 2 11/16" back of display has 12-HD61100 SMD IC's & 2-HD61103 IC. Learn More

Texas Instruments - TIL322P - Opto Display.

Seven Segment Numeric 0.5".

Color@Wavelength: Red

Display Height: 13.0 mm

Forward Voltage-Max: 2.0 V

Number of Characters: 1.0

Operating Temperature-Min: -25.0 C

Operating Temperature-Max: 85.0 C

CC RHDP.

Color: Red

Genuine Vintage Texas Instruments - New Old Stock

Package: 10 Pin Dip.

Learn More

Opto display. Dual 7 Segment display 0.5". Red. Prewired on 1.0 x 1.5" PC board with 4" flat flexible ribbon cable with ten PC pins. Common Anode. Learn More

General Electric - SSL-140 - LED Displays, Solid State Lamp (SSL) 

One of General Electric's most well-known displays, the SSL-140 is an early seven-segment LED in a tiny surface mount package. The SSL-140 is a single die device, in that all of the segments are constructed on the same lump of silicon. The display's decimal point is a separate small cubical die located in the right side of the display area. The SSL-140's dies are bonded to a ceramic wafer with gold leads, with an enclosing plastic cover to protect the fragile dies and bond wires.

Red 0.16" 7-Segment with Decimal Point

Common Cathod

20mA Max.

One of the Very First LED displays - built in Cleveland by General Electric at the original Nela Lamp Plant. Nela Park was the first industrial park in the world being home to most of the lighting breakthroughs of the last century. 

10 Gold Plated Leads

Standard 10 pin display. Long leads also serve as a heat sink to prevent damage to the plastic enclosure. 

The earliest LED’s, light emitting diodes, were produced in the early 1960’s. General Electric was one of the first companies to offer a visible light emitting diode in 1967. SSL LED Prices back than where between $4 and $32 apiece.

Genuine Vintage General Electric - New Old Stock - Very Rare - Own A piece of American Lighting History 

Proudly Made in USA

Learn More

Opto display. Seven (7) segment 5V 17mA glass display. Military NSN 5980-01-271-9924. Dimensions: 22mm wide x 12mm deep x 6.1mm high. Case: 12 pin in a 14 dip pkg. Learn More

TECTROL - SP215 IC, VFD Driver Module.

Vacuum Fluorescent Display Driver.

Input: 6VDC.

Output: 30V at 250mA and 3.7VAC.

Package: Module 7-pin 2" square.

 

Learn More

Large Display Board 2 rows of 40 Characters (5x7) (Panaplex?) with DC/DC converter, 6-SED2020F drivers - removed from equipment Learn More

Hewlett Packard - 5082-7359 Digital displays.

Hexadecimal, smart 4 x 7 dot matrix LED display.

No decimal point, 0.29". 0-9, A-F, base 16 operation.

Blanking control, conserves power.

On-board decoder driver, with 5-bit memory.

High reliability, ceramic glass dippackage.

Learn More

Opto Display. 7 Segment numeric, 0.16". Red. Package: 10 Pin SMD. Dimensions: 0.4" x 0.22". Learn More

LCD, liquid crystal display. 2 x 16 Character. Contacts: 14. Note: Alt P/N: VLMS4546-01. Learn More

LCD, liquid crystal display. 3.5 Digit 0.5" REFL. Display TypeTN: Twisted nematic. Display mode: Reflective. Number of Digits/Alpha: 3.5 Package: 40 Dip. Dimensions: 50.80mm long x 22.86mm wide x 2.80mm high. Viewing area: 45.80mm long x 17.78mm wide. Display format3.5 x 1. Character size: 12.70mm high x 7.62mm wide. Character format: 7-segment. Lead free. Rohs compliant. Learn More

Varitronix International Limited - MDLS16166-LV-G-LED4G LCD.

Product: LCD Character Display Module              

Display Mode: Transflective       

Character Count x Line: 16 x 1 supertwist LED   

Module Size - W x H x T: 80 mm x 36 mm x 14 mm           

Viewing Area - W x H: 64.5 mm x 13.8 mm           

Fluid Type: STN

Backlight Type: LED Yellow/Green           

Background Color: Yellow-Green             

Character Size - H x W: 6.3 mm x 3.15 mm

Dimensions: 64.5mm wide x 13.8mm high (with frame 2.901" long x 0.973" wide.

Board dimensions: 80mm x 36 x 14mm, with 4 holes at 3.2" centers.

Accepts a 16 position edge card, 2.54mm pitch, not included.

Alternate: MDLS16166D-03.

Learn More