Inductors & Coils

Filter  
  1. DC Resistance 0.362 Remove This Item
  2. DC Resistance 0.01 Remove This Item
  3. DC Resistance 0.45 Remove This Item
  4. DC Resistance 0.12 Remove This Item
  5. DC Resistance 0.89 Remove This Item
Clear All
Capacitance  
DC Resistance  
Tolerance  
Manufacturer  
Unit of Measure  
Price  
View as List Grid

6 Items

per page
Set Descending Direction
  1. J.W.MILLER - 4608-RC - Inductor, choke. 3.9uH 1Amp.
    J.W.MILLER - 4608-RC - Inductor, choke. 3.9uH 1Amp.
    $1.00
    IN STOCK - MORE THAN 500 READY TO SHIP!
    Inductor, choke. Inductance: 3.9uH. Current: 1Amp. Tolerance: 10%. DC Resistance: 0.45 Ohm. Minimum quality factor: 60@7.96MHz. Core material: Phenolic. Package: axial leads. Dimensions: 0.27mm D x 20.07mm long. Operating temperature: -55 to 125 Deg C. More info: http://www.bourns.com/data/global/pdfs/4600_series.pdf Learn More
  2. DALE - IH10-05 - 5uH 10Amp Axial Inductor / Coil
    DALE - IH10-05 - 5uH 10Amp Axial Inductor / Coil
    $1.00
    IN STOCK - MORE THAN 100 READY TO SHIP!

    DALE - IH10-05  5uH 10Amp 10% Inductors/Coils.

    Noise filtering for switching regulators, power amplifiers, power supplies and SCR and TRIAC Control circuits.

    DCR = 0.01-OHM

    SRF = 30Mhz

    1.125" x 0.687" x 0.812" (80 per manuf bx NEW @ $1.00 each piece/$80.00)

    Additional Information: https://www.vishay.com/docs/34013/ih.pdf

    Learn More
  3. RENCO - RL1256-3-18 - Power Line Inductor, Choke. 18uH 0.010 Ohm 13.5Amp.
    RENCO - RL1256-3-18 - Power Line Inductor, Choke. 18uH 0.010 Ohm 13.5Amp.
    Special Price $18.98 Regular Price $24.50 As low as $14.98

    RENCO - RL1256-3-18 - Power Line Inductor, Choke.

    Ratings: 18uH 0.010 Ohm 13.5Amp.

    High saturation flux density material is ideal for use in switching regulated power supply applications.

    Ideal wherever high current choke values in a small physical size are needed

    DC Saturated Amps: 29Amp.

    Operating temperature range: -40°C to +130°C

    Dimensions: diameter 1.10" x Height 0.85" (27.94mm x 21.59mm)

    Typical applications include: power amplifiers, power supplies, SCR and TRIAC controls, speaker crossover networks and filters.

     

    Learn More
  4. API DELEVAN - S4924-223K - Inductors, ferrite core/ferrite sleeve. 22uH.
    API DELEVAN - S4924-223K - Inductors, ferrite core/ferrite sleeve. 22uH.
    $0.69
    Inductors, ferrite core/ferrite sleeve. 22uH. DC resistance: 0.89 Ohm max. Max 561mA. Dimensions: 12.44 to 13.21mm wide x 5.84 to 6.35mm deep x 5.33 to 5.84mm high. Operating temperature range: �55 to +125 DegC. Case: SMD. Learn More
  5. API DELEVAN - 2474-28L - Inductors, ferrite core. 180uH.
    API DELEVAN - 2474-28L - Inductors, ferrite core. 180uH.
    $0.69
    Inductors, ferrite core. 180uH. DC resistance: 0.362 Ohm max. Max 0.99 amp. Operating temperature range: �55 to +125 DegC. Maximum power dissipation at 85�C 0.50 W. Inductance Measured at 1 V with no DC current. Dimensions: 6.1mm D x 18.8mm long. Case: axial leads. Learn More
  6. PULSE ENGINEERING - PE62916 - Inductor, choke. 4mH 1kHz 5.2Amp.
    PULSE ENGINEERING - PE62916 - Inductor, choke. 4mH 1kHz 5.2Amp.
    Special Price $7.98 Regular Price $9.50

    PULSE ENGINEERING - PE62916 - Inductor, choke.

    Inductance: 4mH 1kHz

    Current: 5.2Amp.

    Resistance: 0.12 Ohm.

    Package: radial leads.

    Dimensions: 20.32mm wide x 36.57mm long.

    More info: http://ww2.pulseeng.com/products/datasheets/P592.pdf

    Alternate: Digi-key 553-1738-ND, Newark 10Ah0354, Mouser 673-PE-62916NL

    Learn More
View as List Grid

6 Items

per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.