DC Motors - Large

REGAL CCL Motor- DE-25L-0001 - KP63MT014 Motors, AC/DC.

Universal 120V, High Speed (11,000 RPM).

Brush Type Motor

Motor Diameter 1.41" (35.8mm)

Overall Assembly Length 3.70" ((94mm)

Motor Body Length minus shaft 2.788" (70.8mm)

Face Mount 2 Tapped Holes approximately 0.97" Apart 

Removeable Spiral Worm Gear

Works at 12V+ Approximately 150RPM after Gear Reduction 

Spiral Gear Assembly has two Cams 

The Front Bushing support supports and centers the Shaft.

Note: Pull Cam Pin, remove Bridge Rectifier and use as DC Motor 15 VDC 150RPM 

Regal P/N KP63MT014

12V 200mA AC with Bridge Rectifier (SB603) or DC Reversible.

PMI KOLLMORGEN - 00-00917-050 - ServoDisc DC Motor with High Precision Analog Pachometer.

What separates the ServoDisc motor from conventional DC servos is its ironless disc armature. This difference enables ServoDisc motors to deliver a level of performance, in both incremental motion and continuous speed applications, which is not attainable with conventional ironcore motor designs. In addition to performance advantages, ServoDisc motors have a unique compact shape that can be an attractive alternative when solving tight packaging problems.

Type U9M4/U6T with PMI U6 Tachometer.

Horse Power: 3/4HP

Dimensions: 4.4" D x almost 6" long.

Has 1.5" dia attachment to large shaft.

2-wires to motor & two-wires to TachoMeter.

Note: Equivalent Platinum Model U9D-A & U9D-B

Proudly Made in USA

Trane GE - D340316P13 - Programmable Variable Speed Furnace Blower Motor, GE ECM Module.

Power: 1/2 HP

Voltage: 115VAC, 60Hz

Current: 8.0 Amps

Rotation: CCW

Designed for Trane/American Standard Furnaces 

Genuine GE

Replaces MOT5432S

Approximate Dimensions: 5.50" Diameter X 3.10" Deep

New Old Stock

Fincor - 5002441 -  9303318TN - Motor, DC.

Status: Discontinued

Supply: 180VDC.

Current: 2.1A-Armature, PM-Field.

Speed: 1725 RPM.

1/3 HP.

Frame Size: TENV.

Note: Class:F Continuous duty.

Used, has pulley attached.

9303318TN.

Fincor. Note: The motor's length from one end to the end of the shaft is 17-inches. The motor's diameter is approximately 5-inches. The mounting centers are 8-inchess (lengthwise) 8-1/4-iches widthwise.

Proudly Made in USA