DC to DC Converter

MODUPOWER - MP9003

5V to 12VDC 300MA

DC-DC CONVERTER 24(23)-pin 33.5mm x 14.8mm x 12mm above board.

Tubed, New.

Made in USA

Learn More

Endicott Research Group ERG - E1353 Voltage Inverter Converter

ERG has been matching DC-AC inverters to backlit LCDs since 1979 for customers in the USA and around the world. ERG offers the industry’s widest range of DC-AC inverters for powering CCFL-backlit flat panel displays, bar none. Open frame and encapsulated inverters. Single-lamp to 6-lamp inverters.

DC-to-AC Converter

Converts 5 VDC to 200 VAC at 25 kHz.

Mount: PCB (4 Pin)

Encapsulated

Applications: Epson LCD driver. Power to ensure longer useful EL (Electroluminecent Lamp) Lamp Life. ERG supports all major manufacturers of CCFL-, LED- and EL- backlit LCDs, and offers a broad array of standard and custom solutions.

Alternates: EG9013, 8M059013

Proudly Made in USA

Learn More

CALEX - 5D15.150 - DC/DC Converter.

The versatile 5 Watt Dual Output converter is particularly suitable for use in microprocessor systems where 5 Volts is the primary power source, and where a low noise plus and minus output voltage is required.

Status: Discontinued April 2020

Features
• Low Input/Output Noise Operation
• Low Profile Case (0.40”)
• Isolation Capacitance of 50pF
• Extended Operating Temperature Range of -40ºC to +100ºC.
• Fixed Frequency Operation

Input: 5V.

Dual Output: +/-15V 150mA 4.5 watt.

Mount: 5 Pin Module PCB.

Dimensions: 2" Square x 3/8" High.

Proudly Made in the USA.

Learn More

DC/DC Converter. Input: 12VDC (10.8VDC - 13.2VDC). Input current: 20mA no load, 100mA full load. Regulated, without input filter. Output: 5VDC 100mA. Case: 12 Dip in a 24 Dip outline. Case material: non-conductive black plastic. New. Learn More

DC/DC Converter. Single output. Output: 1.8V 4Amp. 7.2 watt. Input: 36-75V. Case: 2.00" L x 1.06" W x 0.50" H (50.8mm x 26.9mm x 12.7mm). 20 Pin. Learn More

5VDC In - 5VDC Out 5W 2" x 1" x 0.4" plus 4-pins UL-approved NEWManuf in Mexico Learn More

IN: 36-72VDC Output 12VDC +/-5% 0 - 1200mA 3Watts - (Adjustable with TRM terminal) DC/DC Converter - Output current limiting, automatic recovery - Only 20 x 28mm, 7.8mm above board. SHIELDED in five dimensions. Learn More

DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More

TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC Input

65mm square x 10mm. 20-pins each side.

Made in USA

Learn More

DC/DC Converter. Dual output. Output: 3.3V / 2.5V 4Amp. 13.2 watt / 10 watt. Input: (24V) 18-36V. Case: 2.00" L x 1.56" W x 0.50" H (50.8mm x 39.6mm x 12.7mm). 30 Pin. Learn More

2Vo (Adjustable with TRM terminal and external resistor) 10Amps OUT - 36-75VDC1.6A Input - many remote functions. Unenclosed. 60x98mm x 11mm high including thirteen terminals. Learn More

2VDC Adjustable 6Amp Out, 36-75VDC-Input 60 x 65 x 11mmH with terminals. UnEnclosed. Learn More

Analog Devices - Linear Technology - LT1109CN8-5 - IC,

DC/DC Converter.

Micropower Low Cost DC/DC Converter

Adjustable and Fixed 5V, 12V

Learn More

24V 2.1Amp Out - 36-75VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More

DC/DC Converter. Input: 150VDC 75 watt. Output: 24VDC 50 watt. Module: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm). Used/Removed from equipment. Learn More

DC/DC Converter. Output: +/-12VDC. Output current: +/-40mA. Input: 5VDC. Package: 12 Module. Learn More

DC/DC Converter. Output: +/-12VDC. Output current: +/-40mA. Input: 5VDC. Package: 12 Module. Learn More