DC to DC Converter

CALEX - 5D15.150 - DC/DC Converter.

The versatile 5 Watt Dual Output converter is particularly suitable for use in microprocessor systems where 5 Volts is the primary power source, and where a low noise plus and minus output voltage is required.

Status: Discontinued April 2020

Features
• Low Input/Output Noise Operation
• Low Profile Case (0.40”)
• Isolation Capacitance of 50pF
• Extended Operating Temperature Range of -40ºC to +100ºC.
• Fixed Frequency Operation

Input: 5V.

Dual Output: +/-15V 150mA 4.5 watt.

Mount: 5 Pin Module PCB.

Dimensions: 2" Square x 3/8" High.

Proudly Made in the USA.

Learn More

15V 150W-max OUT - 48VDC-In(36-75V 188W-max) AMPSS POWER MODULE2.3" x 2.4" x 0.5" plus sixteen 0.25"-leads SENSING,V-ADJ, SHARE, ENABLE, CLK-IN - "For Evaluation - Subject to change" NEW - APM-trademark $155.35 LIST Learn More

ASTEC - AA05A-024L-150S - Power Supply.

Input: 9-36V.

Output: 15V 5 watt.

Isolated Output.

Shielded.

Mount: PCB.

Operating Temp: -25 C to 71 C

Dimensions: 2" x 1" x 0.4" High, 4 leads.

Listed: UL.

Note: Double marked QA13-030-18 and MAS4030-8.

Learn More

VICOR - VI-BN3-CV/B1 48VDC TO 24VDC DC/DC Converter

With Trim and Remote Sensing

Dimensions: 4-5/8" X 2-3/8" x 1"

200W-Max-Input

Learn More

DC/DC 48VDC-171W-Max TO 24VDC 6.25Amps 150Watts Max with Remote Sensing and Trim 4.5" x 2-3/8" x 1" high - NEW

Learn More

TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC Input

65mm square x 10mm. 20-pins each side.

Made in USA

Learn More

TDK LAMBDA - SM2024D12  - DC/DC MODULE fits in special socket. 46mm square x 10.2mm

Status: Discontinued

Case/Package    SMD/SMT

Mount: Surface Mount

Efficiency: 80 %

Isolation Voltage: 700 V

Max Input Voltage: 36 V

Operating Temperature: -40 °C to 60 °C

Max Output Current: 830 mA

Max Power Dissipation; 20 W

Min Input Voltage; 18 V

Number of Outputs: 2

Voltage - Output 1: 12 V

Voltage - Output 2: -12 V

Dimensions; Height 10.16 mm, Length 46.482 mm, Width 35.56 mm

MADE IN USA 

Learn More

Cosel - ZUS1R5-2415 - DC/DC Converter.

Output Voltage: 15V.

Current: 100ma.

Dissipation: 1.5 watt.

Dimensions: 27.5mm wide x 18mm deep x 7mm high.

Package: 4Pin PCB module.

Manufactures specification sheet is available.

Factory New

Learn More

VICOR - VI-2W3-05 - DC-DC CONVERTER DRIVER MODULE 2

4VDC IN (18-36VDC)

24VDC OUT 150W / 6.25Amp WITH LOGIC CIRCUITRY

Product Type: Isolated DC-DC Converters

Number of Outputs: 1 Output   

Output Power: 150 W    

Input Voltage, Min: 18 V, Input Voltage, Max: 36 V           

Output Voltage-Channel 1: 24 V

Isolation Voltage: 3 kV  

Operating Temperature: - 10 C to + 85 C

Package / Case:Full Brick, Through Hole

Dimensions: Length: 117 mm, Width: 61 mm, Height: 12.7 mm  

Dimensions: 4-9/16" L x 2-3/8" W x 1-1/8" HIGH

Identical in specs to the VI-BW3-CV-B1

Alternate: Mouser 492-VI-2W3-EV

Learn More

24V 2.1Amp Out - 36-75VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More

24V (-40% to +10% via TRM terminal & external resistor) 7.2A Output - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More

DC/DC 5V-IN +15V 100ma Learn More

Conversion Devices Inc  CDI - 215S24FR - DC/DC Converter.

Conversion Devices, Inc. designs and manufacturers medical grade linear and switching ac/dc and dc/dc power supplies to OEM's for use in medical and Industrial.

High Quality Overstock from a Medical Equipment Manufacturer

2.5Watt.

Input: 24V.

Output: 15V 133mA.

Mount: PCB Through Hole.

Package: 24 Dip.

New Old Stock - Rare

 

Learn More

DC-DC CONVERTER BOOSTER MODULE 24VDC IN (18-36VDC) 24VDC OUT 150W / 6.25Amp NO LOGIC CIRCUITRY MUST RUN WITH THE VI-2W3-05-B1 FOR BOOSTING THE OUPUT POWER W/ Chassis-mount module housing features screw/lug Wiring Interface Dimensions: 4-9/16" L x 2-3/8" W x 1-1/8" HIGH Identical in specs to the VI-BW3-CV-B1 Learn More

DC/DC Converter. Input: 150VDC 75 watt. Output: 24VDC 50 watt. Module: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm). Used/Removed from equipment. Learn More

Burr Brown - DCP011515DBP-U - DC/DC Converter.

Input: 15V.

Dual Output: 15V.

Unregulated.

Dissipation: 1 Watt.

Package: 7 pin in a SOP-14 gull-wing package.

Burrt Brown is now Texas Instruments

Learn More

15V OUT - 48V IN 3" x 2.5" x 0.5" UL-TUV-certified Had Enable Trim Remote Sensing and Enable connections all plainly marked NEW Learn More

Phoenix Contact - QUINT-DC-UPS/24DC/10 - 2866226 - Uninterruptible Power Supply

The QUINT DC to DC UPS is a family of 24 VDC uninterruptible power supplies that are scalable and DIN-Rail mountable. The QUINT-DC-UPS/24DC/10 has a built in battery which provides up to 10 amps via its integrated 1.3 Ah battery module.

Input: 10.5Amp 24VDC.

Input Voltage Range: 22.5 to 30 VDC

Output: 10Amp 24VDC.

Dimensions: 100mm x 130 mm x125 mm

Weight: 1.8 kg 

Operating Temperature: 0C to 50C  

Note 1: Alt P/N: 2866226.

Note 2: From the older manufactures date the internal 1.3 Ah battery Module must be replaced. Note the significant price reduction.

Last one (New Old Stock) was our store display without box and was further price reduced.

UNSPSC Code 32000000.

Learn More