DC to DC Converter
- POWER ONE - DGP20E48T5/15 - Power Supply. DC Converter. Output: Triple Output 5V 2.5A, 15V 250mA, and -15V 250mA .
POWER ONE (Bel Power Solutions) - DGP20E48T5/15 - Power Supply / IGBT Module.
Status: Discontinued
DC/DC Converter.
Input Voltage to 48V.
Triple Output: 5V 2.5A, 15V 250mA, and -15V 250mA.
Power: 20 Watt. Isolated.
Voltage-Isolation: 700V.
Input: 36V min, 72V max.
Operating Temperature: -55 to 100 Deg C.
Mount: PCB.
Package: 7 Pin Module.
Approvals: UL, CSA, RU, TUV
Dimensions: 2.02" L x 2.02" W x 0.45" H (51.3mm x 51.3mm x 11.4mm).
DC-DC converter (ex. Board Mount type, Off-board type) to work properly, it usually needs a minimum load for each output. The minimum load is to ensure that the DC-DC converter can operate within the manufacturer's specification.
Note: Genuine Power One - Made in Mexico
Learn More - ASTEC - AA20B-012L-033S - DC-DC Converter. (9 to 36) V to 3.3 V.$44.95DC-DC Converter. Input: 9 to 36V. Output: 3.3V at 4.5Amp. Dissipation: 15 Watt. Package: PCB 6 pin module. Learn More
- ASTEC - AA05A-024L-150S - Power Supply. In: 9-36V. Out: 15V 5W.
ASTEC - AA05A-024L-150S - Power Supply.
Input: 9-36V.
Output: 15V 5 watt.
Isolated Output.
Shielded.
Mount: PCB.
Operating Temp: -25 C to 71 C
Dimensions: 2" x 1" x 0.4" High, 4 leads.
Listed: UL.
Note: Double marked QA13-030-18 and MAS4030-8.
Learn More - ERICSSON - PKG4410PI - DC/DC 3.3VDC 14A OUT,38-72V-IN 3"X2.5"READY TO SHIP - ONLY 50 LEFT IN STOCK!
ERICSSON - PKG4410P - DC/DC Convertor
The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.
Input Voltage: 38-72VDC
Output Voltage: 3.3VDC @ 13.6Amps
45W Output.
Efficiency typ 86% (5 V) at full load
1500 V dc isolation voltage
Terminal Type: PCB
MTBF >200 years at +75 °C casetemperature
Rugged mechanical design andefficient thermal management, max+100 °C case temperature
EMI measured according toEN 55 022 and FCC part 15J
Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.
Made in Sweden
Learn More - Nemic/Lambda - PC6-48-5 - 5Vo 1.2Amp OUT - 36-72VDC Input$69.88IN: 36-72VDC Output 12VDC +/-5% 0 - 1200mA 3Watts - (Adjustable with TRM terminal) DC/DC Converter - Output current limiting, automatic recovery - Only 20 x 28mm, 7.8mm above board. SHIELDED in five dimensions. Learn More
- Lucent - JW150F1-99W - DC/DC Converter. Used.$44.99DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More
- ASTEC - AL60A-300L-050F20 - 5V 20A OUT - 180 - 400VDC-Input$124.955V@20A 100W-max OUT - 300VDC-In(400-180V 125W-max-In) 2.4" x 2.3" x 0.51" Plus Fourteen 0.25" leads out the top AMPSS POWER MODULE Sensing, Temp-Monitoring, Sharing, Clock-In, Enable UL & VDE & CSA-Level 3 Learn More
- Astec - AK42A-024L-033D025SM - DC/DC Converter. Dual output. Output: 3.3V / 2.5V 4Amp.$69.95DC/DC Converter. Dual output. Output: 3.3V / 2.5V 4Amp. 13.2 watt / 10 watt. Input: (24V) 18-36V. Case: 2.00" L x 1.56" W x 0.50" H (50.8mm x 39.6mm x 12.7mm). 30 Pin. Learn More
- ASTEC - AA15A-048L-120S - 12V 1.25A OUT 48V IN$49.9920-70VDC-IN 12V 1.25A OUTPUT - 2" x 2" x 0.4" plus Seven 0.25" leads - NEW Learn More
- Nemic/Lambda - RM50-48-2/TEL - 2Vo 10Amps OUT - 36-60VDC Input$79.892Vo (Adjustable with TRM terminal and external resistor) 10Amps OUT - 36-75VDC1.6A Input - many remote functions. Unenclosed. 60x98mm x 11mm high including thirteen terminals. Learn More
- Nemic/Lambda - RM30-48-2/TEL - 2VDC 6A-Out - 36-75VDC-Input$49.892VDC Adjustable 6Amp Out, 36-75VDC-Input 60 x 65 x 11mmH with terminals. UnEnclosed. Learn More
- Densei/Lambda - PAH50S48-24/V - 24V 2.1Amp Out - 36-75VDC Input$95.8824V 2.1Amp Out - 36-75VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More
- Densei/Lambda - PAH75S48-24/V - 28V 2.7A Out - 36-76VDC Input$95.8828Vo 2.7A Out - 36-76VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More