DC to DC Converter
- POWER ONE - DGP20E48T5/15 - Power Supply. DC Converter. Output: Triple Output 5V 2.5A, 15V 250mA, and -15V 250mA .
POWER ONE (Bel Power Solutions) - DGP20E48T5/15 - Power Supply / IGBT Module.
Status: Discontinued
DC/DC Converter.
Input Voltage to 48V.
Triple Output: 5V 2.5A, 15V 250mA, and -15V 250mA.
Power: 20 Watt. Isolated.
Voltage-Isolation: 700V.
Input: 36V min, 72V max.
Operating Temperature: -55 to 100 Deg C.
Mount: PCB.
Package: 7 Pin Module.
Approvals: UL, CSA, RU, TUV
Dimensions: 2.02" L x 2.02" W x 0.45" H (51.3mm x 51.3mm x 11.4mm).
DC-DC converter (ex. Board Mount type, Off-board type) to work properly, it usually needs a minimum load for each output. The minimum load is to ensure that the DC-DC converter can operate within the manufacturer's specification.
Note: Genuine Power One - Made in Mexico
Learn More - ASTEC - AA20B-012L-033S - DC-DC Converter. (9 to 36) V to 3.3 V.$44.95DC-DC Converter. Input: 9 to 36V. Output: 3.3V at 4.5Amp. Dissipation: 15 Watt. Package: PCB 6 pin module. Learn More
- ERICSSON - PKG4410PI - DC/DC 3.3VDC 14A OUT,38-72V-IN 3"X2.5"READY TO SHIP - ONLY 50 LEFT IN STOCK!
ERICSSON - PKG4410P - DC/DC Convertor
The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.
Input Voltage: 38-72VDC
Output Voltage: 3.3VDC @ 13.6Amps
45W Output.
Efficiency typ 86% (5 V) at full load
1500 V dc isolation voltage
Terminal Type: PCB
MTBF >200 years at +75 °C casetemperature
Rugged mechanical design andefficient thermal management, max+100 °C case temperature
EMI measured according toEN 55 022 and FCC part 15J
Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.
Made in Sweden
Learn More - Nemic/Lambda - RM100-48-2 - DC/DC converter. Output: 2VDC 20Amp.$89.89DC/DC converter. Output: 2VDC (Adjustable with Trim resistor) 20Amp. Input: 36-60VDC. Dimensions: 60 x 116 x 11mm high with terminals. Un-Enclosed. Learn More
- PCC - PWR70 - DC/DC Converter.Special Price $95.99 Regular Price $125.00DC/DC Converter. The PWR70 is a dual-output DC/DC converter designed for general purpose power conversion applications where high efficiency is more important than load regulation. The PWR70 provides a plus and minus output voltage approximately equal to the input voltage magnitude. It operates over an input voltage range of 10VDC to 18VDC. Isolation voltage is a minimum of 2000VDC. Package: module 5 Pin, 1-1/8" square x 5/8" high. Learn More
- Densei/Lambda - PAH75S48-24/V - 28V 2.7A Out - 36-76VDC Input$95.8828Vo 2.7A Out - 36-76VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More