DC to DC Converter

  1. Input Voltage 36-75 VDC Remove This Item
  2. Input Voltage 36 Remove This Item
  3. Input Voltage 10-18 Remove This Item
  4. Input Voltage 60 Remove This Item
Clear All
Input Voltage  
Output Voltage  
Unit of Measure  
View as List Grid

5 Items

per page
Set Descending Direction
  1. POWER ONE - DGP20E48T5/15 - Power Supply. DC Converter. Output: Triple Output 5V 2.5A, 15V 250mA, and -15V 250mA .
    Special Price $54.98 Regular Price $68.95 As low as $49.98

    POWER ONE (Bel Power Solutions) - DGP20E48T5/15 - Power Supply / IGBT Module.

    Status: Discontinued

    DC/DC Converter.

    Input Voltage to 48V.

    Triple Output: 5V 2.5A, 15V 250mA, and -15V 250mA.

    Power: 20 Watt. Isolated.

    Voltage-Isolation: 700V.

    Input: 36V min, 72V max.

    Operating Temperature: -55 to 100 Deg C.

    Mount: PCB.

    Package: 7 Pin Module.

    Approvals: UL, CSA, RU, TUV

    Dimensions: 2.02" L x 2.02" W x 0.45" H (51.3mm x 51.3mm x 11.4mm).

    DC-DC converter (ex. Board Mount type, Off-board type) to work properly, it usually needs a minimum load for each output. The minimum load is to ensure that the DC-DC converter can operate within the manufacturer's specification.

    Note: Genuine Power One - Made in Mexico

    Learn More
  2. ASTEC - AA20B-012L-033S - DC-DC Converter. (9 to 36) V to 3.3 V.
    DC-DC Converter. Input: 9 to 36V. Output: 3.3V at 4.5Amp. Dissipation: 15 Watt. Package: PCB 6 pin module. Learn More
  3. Astec - AK40A-048L-018F04SM - DC/DC Converter. Single output. Output: 1.8V 4Amp.
    DC/DC Converter. Single output. Output: 1.8V 4Amp. 7.2 watt. Input: 36-75V. Case: 2.00" L x 1.06" W x 0.50" H (50.8mm x 26.9mm x 12.7mm). 20 Pin. Learn More
  4. Nemic/Lambda - RM100-48-2 - DC/DC converter. Output: 2VDC 20Amp.
    DC/DC converter. Output: 2VDC (Adjustable with Trim resistor) 20Amp. Input: 36-60VDC. Dimensions: 60 x 116 x 11mm high with terminals. Un-Enclosed. Learn More
  5. PCC - PWR70 - DC/DC Converter.
    Special Price $95.99 Regular Price $125.00
    DC/DC Converter. The PWR70 is a dual-output DC/DC converter designed for general purpose power conversion applications where high efficiency is more important than load regulation. The PWR70 provides a plus and minus output voltage approximately equal to the input voltage magnitude. It operates over an input voltage range of 10VDC to 18VDC. Isolation voltage is a minimum of 2000VDC. Package: module 5 Pin, 1-1/8" square x 5/8" high. Learn More
View as List Grid

5 Items

per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.