DC to DC Converter
- MODUPOWER - MP9003 by MPI - 5V to 12VDC 300MA DC-DC CONVERTER$7.95IN STOCK - MORE THAN 500 READY TO SHIP!
MODUPOWER - MP9003
5V to 12VDC 300MA
DC-DC CONVERTER 24(23)-pin 33.5mm x 14.8mm x 12mm above board.
Tubed, New.
Made in USA
Learn More - POWER ONE - DGP20E48T5/15 - Power Supply. DC Converter. Output: Triple Output 5V 2.5A, 15V 250mA, and -15V 250mA .
POWER ONE (Bel Power Solutions) - DGP20E48T5/15 - Power Supply / IGBT Module.
Status: Discontinued
DC/DC Converter.
Input Voltage to 48V.
Triple Output: 5V 2.5A, 15V 250mA, and -15V 250mA.
Power: 20 Watt. Isolated.
Voltage-Isolation: 700V.
Input: 36V min, 72V max.
Operating Temperature: -55 to 100 Deg C.
Mount: PCB.
Package: 7 Pin Module.
Approvals: UL, CSA, RU, TUV
Dimensions: 2.02" L x 2.02" W x 0.45" H (51.3mm x 51.3mm x 11.4mm).
DC-DC converter (ex. Board Mount type, Off-board type) to work properly, it usually needs a minimum load for each output. The minimum load is to ensure that the DC-DC converter can operate within the manufacturer's specification.
Note: Genuine Power One - Made in Mexico
Learn More - ASTEC - AA20B-012L-033S - DC-DC Converter. (9 to 36) V to 3.3 V.$44.95DC-DC Converter. Input: 9 to 36V. Output: 3.3V at 4.5Amp. Dissipation: 15 Watt. Package: PCB 6 pin module. Learn More
- ERICSSON - PKG4410PI - DC/DC 3.3VDC 14A OUT,38-72V-IN 3"X2.5"READY TO SHIP - ONLY 50 LEFT IN STOCK!
ERICSSON - PKG4410P - DC/DC Convertor
The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.
Input Voltage: 38-72VDC
Output Voltage: 3.3VDC @ 13.6Amps
45W Output.
Efficiency typ 86% (5 V) at full load
1500 V dc isolation voltage
Terminal Type: PCB
MTBF >200 years at +75 °C casetemperature
Rugged mechanical design andefficient thermal management, max+100 °C case temperature
EMI measured according toEN 55 022 and FCC part 15J
Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.
Made in Sweden
Learn More - Lucent - JW150F1-99W - DC/DC Converter. Used.$44.99DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More
- VDO-PAK - VDO-161 - Motorola Flip-Phone Battery Charger/Eliminator.
VDO-PAK - VDO-161 - Battery Charger/Eliminator
12V Automotive Cigarette Plug
5 amp Fuse Protection
5 foot Coiled Curly Cord
3.4mm Right Angle Female Connector on Opposite End.
LED power Indicatiopn Indicator
FOR USE WITH MOTOROLA FLIP-PHONE TYPE BATTERY.
Learn More - RELIABILITY - VA12-12 - DC-to-DC-Charge Pump. 24Dip Pulls/Used.Special Price $12.95 Regular Price $17.50DC-to-DC-Charge Pump Voltage Converter - DC-DC, Output +12V/80mA,-12V/80mA. Case: 24 Dip/Socket Pulls/Used. Learn More