DC to DC Converter

Filter  
  1. Input Voltage 36-75 Remove This Item
  2. Input Voltage 36 Remove This Item
  3. Input Voltage 37-72 Remove This Item
  4. Input Voltage 60 Remove This Item
  5. Input Voltage 5 Remove This Item
  6. Input Voltage 24V Remove This Item
  7. Output Voltage 3.3 Remove This Item
  8. Output Voltage 2 Remove This Item
Clear All
Input Voltage  
Output Voltage  
Manufacturer  
Amperage  
Unit of Measure  
Price  
View as List Grid

6 Items

per page
Set Descending Direction
  1. ASTEC - AA20B-012L-033S - DC-DC Converter. (9 to 36) V to 3.3 V.
    ASTEC - AA20B-012L-033S - DC-DC Converter. (9 to 36) V to 3.3 V.
    $44.95
    DC-DC Converter. Input: 9 to 36V. Output: 3.3V at 4.5Amp. Dissipation: 15 Watt. Package: PCB 6 pin module. Learn More
  2. ERICSSON - PKG4410PI - DC/DC 3.3VDC 14A OUT,38-72V-IN 3"X2.5"
    ERICSSON - PKG4410PI - DC/DC 3.3VDC 14A OUT,38-72V-IN 3"X2.5"
    Special Price $18.98 Regular Price $32.50 As low as $16.98
    READY TO SHIP - ONLY 50 LEFT IN STOCK!

    ERICSSON - PKG4410P - DC/DC  Convertor

    The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.

    Input Voltage: 38-72VDC

    Output Voltage: 3.3VDC @ 13.6Amps

    45W Output.

    Efficiency typ 86% (5 V) at full load

    1500 V dc isolation voltage

    Terminal Type: PCB

    MTBF >200 years at +75 °C casetemperature

    Rugged mechanical design andefficient thermal management, max+100 °C case temperature

    EMI measured according toEN 55 022 and FCC part 15J

    Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.

    Made in Sweden

    Learn More
  3. Nemic/Lambda - RM100-48-2 - DC/DC converter. Output: 2VDC 20Amp.
    Nemic/Lambda - RM100-48-2 - DC/DC converter. Output: 2VDC 20Amp.
    $89.89
    DC/DC converter. Output: 2VDC (Adjustable with Trim resistor) 20Amp. Input: 36-60VDC. Dimensions: 60 x 116 x 11mm high with terminals. Un-Enclosed. Learn More
  4. Lucent - JW150F1-99W - DC/DC Converter. Used.
    Lucent - JW150F1-99W - DC/DC Converter. Used.
    $44.99
    DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More
  5. Nemic/Lambda - RM50-48-2/TEL - 2Vo 10Amps OUT - 36-60VDC Input
    Nemic/Lambda - RM50-48-2/TEL - 2Vo 10Amps OUT - 36-60VDC Input
    $79.89
    2Vo (Adjustable with TRM terminal and external resistor) 10Amps OUT - 36-75VDC1.6A Input - many remote functions. Unenclosed. 60x98mm x 11mm high including thirteen terminals. Learn More
  6. Nemic/Lambda - RM30-48-2/TEL - 2VDC 6A-Out - 36-75VDC-Input
    Nemic/Lambda - RM30-48-2/TEL - 2VDC 6A-Out - 36-75VDC-Input
    $49.89
    2VDC Adjustable 6Amp Out, 36-75VDC-Input 60 x 65 x 11mmH with terminals. UnEnclosed. Learn More
View as List Grid

6 Items

per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.