DC to DC Converter
- EMERSON - HD6976BP - 16-901001171-00 - DC Car Adapter. 12VDC to 3.6VDC 500mA.
EMERSON - HD6976BP - 16-901001171-00 - Power Supply. DC to DC Car Adapter.
Input: 12VDC to 3.6VDC 500mA out.
Regulated Output.
Input: Male Cigarette Plug.
Output: Has a 6 foot 2 Conductor Cable
Right Angle Barrel Plug, Diameter 3.7mm (0.150:) - Center Positive
Fuse Protected with replaceable 250mA Fuse in Tip.
Alternate: Model CCA001.
Note: Good option for charging 3.6 volt NiCad and NiMH Batteries or three 1.2VDc Cells.
Applications: Charging of R/C, Robots, Instruments, Tools, Toys, Audio Devices.
- VICOR - VI-BN3-CV/B1 - 48VDC to 24VDC 150W DC/DCSpecial Price $79.95 Regular Price $95.97READY TO SHIP - ONLY 6 LEFT IN STOCK!
VICOR - VI-BN3-CV/B1 48VDC TO 24VDC DC/DC Converter
With Trim and Remote Sensing
Dimensions: 4-5/8" X 2-3/8" x 1"
200W-Max-Input
Learn More - ERICSSON - PKG4410PI - DC/DC 3.3VDC 14A OUT,38-72V-IN 3"X2.5"READY TO SHIP - ONLY 50 LEFT IN STOCK!
ERICSSON - PKG4410P - DC/DC Convertor
The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.
Input Voltage: 38-72VDC
Output Voltage: 3.3VDC @ 13.6Amps
45W Output.
Efficiency typ 86% (5 V) at full load
1500 V dc isolation voltage
Terminal Type: PCB
MTBF >200 years at +75 °C casetemperature
Rugged mechanical design andefficient thermal management, max+100 °C case temperature
EMI measured according toEN 55 022 and FCC part 15J
Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.
Made in Sweden
Learn More - VICOR - VI-2N3-CV/B1 - 48VDC to 24VDC 6A 150WSpecial Price $79.95 Regular Price $95.00Out of stock
DC/DC 48VDC-171W-Max TO 24VDC 6.25Amps 150Watts Max with Remote Sensing and Trim 4.5" x 2-3/8" x 1" high - NEW
Learn More - SYNQOR - PQ48033HTA50NNS - DC/DC 48V to 3.3V 50AmpSpecial Price $49.95 Regular Price $75.0048VDC to 3.3VDC at 50Amps "Half-Brick". Isolated, No heatsink, required for heavy current output. Learn More
- Lucent - JW150F1-99W - DC/DC Converter. Used.$44.99DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More
- TDK LAMBDA - SM2024D12 - 12VDC 20Watt OUT - 24VDC INSpecial Price $69.98 Regular Price $89.97
TDK LAMBDA - SM2024D12 - DC/DC MODULE fits in special socket. 46mm square x 10.2mm
Status: Discontinued
Case/Package SMD/SMT
Mount: Surface Mount
Efficiency: 80 %
Isolation Voltage: 700 V
Max Input Voltage: 36 V
Operating Temperature: -40 °C to 60 °C
Max Output Current: 830 mA
Max Power Dissipation; 20 W
Min Input Voltage; 18 V
Number of Outputs: 2
Voltage - Output 1: 12 V
Voltage - Output 2: -12 V
Dimensions; Height 10.16 mm, Length 46.482 mm, Width 35.56 mm
MADE IN USA
Learn More - Densei/Lambda - PAH50S48-24/V - 24V 2.1Amp Out - 36-75VDC Input$95.8824V 2.1Amp Out - 36-75VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More