DC to DC Converter
- POWER ONE - DGP20E48T5/15 - Power Supply. DC Converter. Output: Triple Output 5V 2.5A, 15V 250mA, and -15V 250mA .
POWER ONE (Bel Power Solutions) - DGP20E48T5/15 - Power Supply / IGBT Module.
Status: Discontinued
DC/DC Converter.
Input Voltage to 48V.
Triple Output: 5V 2.5A, 15V 250mA, and -15V 250mA.
Power: 20 Watt. Isolated.
Voltage-Isolation: 700V.
Input: 36V min, 72V max.
Operating Temperature: -55 to 100 Deg C.
Mount: PCB.
Package: 7 Pin Module.
Approvals: UL, CSA, RU, TUV
Dimensions: 2.02" L x 2.02" W x 0.45" H (51.3mm x 51.3mm x 11.4mm).
DC-DC converter (ex. Board Mount type, Off-board type) to work properly, it usually needs a minimum load for each output. The minimum load is to ensure that the DC-DC converter can operate within the manufacturer's specification.
Note: Genuine Power One - Made in Mexico
Learn More - EMERSON - HD6976BP - 16-901001171-00 - DC Car Adapter. 12VDC to 3.6VDC 500mA.
EMERSON - HD6976BP - 16-901001171-00 - Power Supply. DC to DC Car Adapter.
Input: 12VDC to 3.6VDC 500mA out.
Regulated Output.
Input: Male Cigarette Plug.
Output: Has a 6 foot 2 Conductor Cable
Right Angle Barrel Plug, Diameter 3.7mm (0.150:) - Center Positive
Fuse Protected with replaceable 250mA Fuse in Tip.
Alternate: Model CCA001.
Note: Good option for charging 3.6 volt NiCad and NiMH Batteries or three 1.2VDc Cells.
Applications: Charging of R/C, Robots, Instruments, Tools, Toys, Audio Devices.
- ASTEC - AA20B-012L-033S - DC-DC Converter. (9 to 36) V to 3.3 V.$44.95DC-DC Converter. Input: 9 to 36V. Output: 3.3V at 4.5Amp. Dissipation: 15 Watt. Package: PCB 6 pin module. Learn More
- ERICSSON - PKG4410PI - DC/DC 3.3VDC 14A OUT,38-72V-IN 3"X2.5"READY TO SHIP - ONLY 50 LEFT IN STOCK!
ERICSSON - PKG4410P - DC/DC Convertor
The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.
Input Voltage: 38-72VDC
Output Voltage: 3.3VDC @ 13.6Amps
45W Output.
Efficiency typ 86% (5 V) at full load
1500 V dc isolation voltage
Terminal Type: PCB
MTBF >200 years at +75 °C casetemperature
Rugged mechanical design andefficient thermal management, max+100 °C case temperature
EMI measured according toEN 55 022 and FCC part 15J
Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.
Made in Sweden
Learn More - Astec - AK40A-048L-018F04SM - DC/DC Converter. Single output. Output: 1.8V 4Amp.$69.95DC/DC Converter. Single output. Output: 1.8V 4Amp. 7.2 watt. Input: 36-75V. Case: 2.00" L x 1.06" W x 0.50" H (50.8mm x 26.9mm x 12.7mm). 20 Pin. Learn More
- SYNQOR - PQ48033HTA50NNS - DC/DC 48V to 3.3V 50AmpSpecial Price $49.95 Regular Price $75.0048VDC to 3.3VDC at 50Amps "Half-Brick". Isolated, No heatsink, required for heavy current output. Learn More
- Lucent - JW150F1-99W - DC/DC Converter. Used.$44.99DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More
- Densei/Lambda - PAH100S48-3.3/V - 3.3VDC 23Amp OUT - 36-76VDC IN$95.883.3V (+/-10% via TRM terminal & external resistor) 23.4Amps Output - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More
- Nemic/Lambda - PAH50S48-3.3 - 3.3Vo 11.7Amp - 36-76VDC Input$95.883.3Vo 11.7Amp - 36-76VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More
- LAMBDA - PM10-12S03 - 3.3V 2.55A Out - 9-18VDC Input$49.883.3Vo 2.55A Out - 9-18Vin DC Input Only 25 x 51mm x 8mm above board. Learn More