DC to DC Converter

MODUPOWER - MP9003

5V to 12VDC 300MA

DC-DC CONVERTER 24(23)-pin 33.5mm x 14.8mm x 12mm above board.

Tubed, New.

Made in USA

Learn More

Vicor - VI-2W0-CX - DC/DC Converter.

Series    VI-200™ (75W) 

Packaging            Bulk      

Part Status          Active  

Type      Isolated Module              

Number of Outputs         1             

Voltage - Input (Min)      18V       

Voltage - Input (Max)     36V       

Voltage - Output 1           5V          

Current - Output (Max) 15A       

Power (Watts)   75W      

Voltage - Isolation            3kV       

Applications       ITE (Commercial)             

Features              OCP, OTP, OVP, SCP       

Operating Temperature -25°C ~ 85°C       

Efficiency             90%       

Mounting Type Through Hole    

Package / Case  Full Brick             

Size / Dimension              4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm)

Note: Factory New. Non RoHS.

Learn More

International Power Devices - DUS505 - DC/DC Converter

Voltage In 4.65V to 5.50V

Isolated Voltage-out 5V at 1000mA

Mount: PCB, 4 Gold Pins

Efficiency 76%

Dimensions: 2" x 1" x 0.4"

Hermetically Sealed.

Made in USA - New Old Stock - Rare

Learn More

CALEX - 5D15.150 - DC/DC Converter.

The versatile 5 Watt Dual Output converter is particularly suitable for use in microprocessor systems where 5 Volts is the primary power source, and where a low noise plus and minus output voltage is required.

Status: Discontinued April 2020

Features
• Low Input/Output Noise Operation
• Low Profile Case (0.40”)
• Isolation Capacitance of 50pF
• Extended Operating Temperature Range of -40ºC to +100ºC.
• Fixed Frequency Operation

Input: 5V.

Dual Output: +/-15V 150mA 4.5 watt.

Mount: 5 Pin Module PCB.

Dimensions: 2" Square x 3/8" High.

Proudly Made in the USA.

Learn More

DC/DC Converter. Output: +/-12V 30Watts. Input: 48V(-35 to -60VDC@ 1.2A). Dimensions: 3" square x 0.4" high, 9 pin. Listed: UL and CSA-Level3. Learn More

2VDC@10A-Output - 12VDC@30WATTS Input DC/DC 2.3"x2.3"x0.75"HCONT OPERATION 9-MODULE W/GROUNDING BASEPLATEFUSE REQ 8A 60V Learn More

5VDC In - 5VDC Out 5W 2" x 1" x 0.4" plus 4-pins UL-approved NEWManuf in Mexico Learn More

IN: 36-72VDC Output 12VDC +/-5% 0 - 1200mA 3Watts - (Adjustable with TRM terminal) DC/DC Converter - Output current limiting, automatic recovery - Only 20 x 28mm, 7.8mm above board. SHIELDED in five dimensions. Learn More

Dual output 2.5Watt Module Inverters 48V in +/-12V Outwww.alldatasheet.com Learn More

3.3VDC and 5VDC AT 15Amps 75Watts Max - +/-10% via TRM terminal & external resistor - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More

DC/DC Converter. 15 Watt.Output: 15VDC 1Amp (1000mA). Input: 48V nominal 20 to 60VDC. Input current: 20mA no load, 380mA full load. Mount: Case "J", PCB, 7 Pin module. Dimensions: approximately 2" x 1.6". New. Learn More

Conversion Devices Inc  CDI - 212S24FR - DC/DC Converter.

Conversion Devices, Inc. designs and manufacturers medical grade linear and switching ac/dc and dc/dc power supplies to OEM's for use in medical and Industrial.

High Quality Overstock from a Medical Equipment Manufacturer

2.5Watt.

Input: 24V.

Output: 12V 165mA.

Mount: PCB Through Hole.

Package: 24 Dip.

New Old Stock - Rare

Learn More

DC/DC Converter. 3 Watt, unregulated. Input: 24VDC. Output: 12VDC 250mA. Mount: PCB 12 Pin. Learn More

1.5 WATT 24-pin DIP Unregulated +/-12V +/104mA Out - only 5V-input NEW DC/DC BEAUTIES, in tubes. Learn More

DC/DC Converter. Dual output. Output: 3.3V / 2.5V 4Amp. 13.2 watt / 10 watt. Input: (24V) 18-36V. Case: 2.00" L x 1.56" W x 0.50" H (50.8mm x 39.6mm x 12.7mm). 30 Pin. Learn More

20-70VDC-IN 12V 1.25A OUTPUT - 2" x 2" x 0.4" plus Seven 0.25" leads - NEW Learn More

DC/DC Converter 150Watt 48vdc input Tripple output 5vdc & bipolar 12v High Power Package Trim and Enable Pin USED/PULLSwith attached heatsink 13-PinInternational Power Devices USA Learn More

PVD1R5-5-1212 �12.0V 0.06Amp 1.44W 5.0VDC-InputSIP Style Footprint - Dual Output - Adjustable Output Voltages - In/Out IsolationBody: 1.084" x 0.661" tall. Learn More

5.0VDC OUT 0.6Amp OUT 3.0WATTS 12.0V-IN -Vin Negative Input Terminal+Vin Positive Input Terminal * +Vout Positive Output Terminal * -Vout Negative Output Terminal * NC No connection * COM Common * TRM TrimBody: 1.268" x 0.653" tall. Learn More

Analog Devices - Linear Technology - LT1109CN8-5 - IC,

DC/DC Converter.

Micropower Low Cost DC/DC Converter

Adjustable and Fixed 5V, 12V

Learn More

Bipolar Output +/- 12V 0.42A each 18-36VDC-In 0.71A Small <1"x2"x0.38"high. UL VDE CSA Good Housekeeping Seal of Approval, maybe. Learn More

VDO-PAK - VDO-161 - Battery Charger/Eliminator

12V Automotive Cigarette Plug

5 amp Fuse Protection

5 foot Coiled Curly Cord

3.4mm Right Angle Female Connector on Opposite End.

LED power Indicatiopn Indicator

FOR USE WITH MOTOROLA FLIP-PHONE TYPE BATTERY.

Learn More

DC/DC Converter. Input: 18-36VDC. Output: 5VDC +/-5% 0-600mA 3 watt. (Adjustable with TRM terminal). Output current limiting, automatic recovery. Dimensions: 20 x 28mm, 7.8mm above board. Shielded in five dimensions. More info: http://us.tdk-lambda.com/lp/ftp/Specs/pc.pdf Learn More

DC-to-DC-Charge Pump Voltage Converter - DC-DC, Output +12V/80mA,-12V/80mA. Case: 24 Dip/Socket Pulls/Used. Learn More