DC to DC Converter
- EMERSON - HD6976BP - 16-901001171-00 - DC Car Adapter. 12VDC to 3.6VDC 500mA.
EMERSON - HD6976BP - 16-901001171-00 - Power Supply. DC to DC Car Adapter.
Input: 12VDC to 3.6VDC 500mA out.
Regulated Output.
Input: Male Cigarette Plug.
Output: Has a 6 foot 2 Conductor Cable
Right Angle Barrel Plug, Diameter 3.7mm (0.150:) - Center Positive
Fuse Protected with replaceable 250mA Fuse in Tip.
Alternate: Model CCA001.
Note: Good option for charging 3.6 volt NiCad and NiMH Batteries or three 1.2VDc Cells.
Applications: Charging of R/C, Robots, Instruments, Tools, Toys, Audio Devices.
- CALEX - 5D15.150 - DC/DC Converter. Dual Out: +/-15V 150mA 4.5W.
CALEX - 5D15.150 - DC/DC Converter.
The versatile 5 Watt Dual Output converter is particularly suitable for use in microprocessor systems where 5 Volts is the primary power source, and where a low noise plus and minus output voltage is required.
Status: Discontinued April 2020
Features
• Low Input/Output Noise Operation
• Low Profile Case (0.40”)
• Isolation Capacitance of 50pF
• Extended Operating Temperature Range of -40ºC to +100ºC.
• Fixed Frequency OperationInput: 5V.
Dual Output: +/-15V 150mA 4.5 watt.
Mount: 5 Pin Module PCB.
Dimensions: 2" Square x 3/8" High.
Proudly Made in the USA.
Learn More - ASTEC - JA11-300-48 - 48V Out - 300VDC-InputSpecial Price $79.95 Regular Price $98.0040V Out - 300VDC-Input - 2" Square x 0.4" high plus Four 0.25"-pins out de bottom UL approved 10/tubeDescription = dc-to-dc-Charge Pump Voltage Converter - Pi Input Fltr,UL 94V-0 compliant. Package = Module 5-Pin Module Factory New. Learn More
- ASTEC - AK60A-024L-022F10G - 2.2VDC 10Amp OUT 18-36VDC INSpecial Price $87.99 Regular Price $118.952.2V 22W 10Amp Output - 24VDC(36-18V 34Watts-Max)-INPUT 2.4" x 2.3" x 0.5" plus Sixteen pins 0.2" high "Share, Enable, Clk-In, RSV, V Adj, Remote Sensing"AMPSS POWER MODULE - "For evaluation - subject to change" NEW APS E132002 Hi-pot tested UL&CSA Learn More
- ASTEC - AA20B-012L-033S - DC-DC Converter. (9 to 36) V to 3.3 V.$44.95DC-DC Converter. Input: 9 to 36V. Output: 3.3V at 4.5Amp. Dissipation: 15 Watt. Package: PCB 6 pin module. Learn More
- VICOR - VI-BN3-CV/B1 - 48VDC to 24VDC 150W DC/DCSpecial Price $79.95 Regular Price $95.97READY TO SHIP - ONLY 6 LEFT IN STOCK!
VICOR - VI-BN3-CV/B1 48VDC TO 24VDC DC/DC Converter
With Trim and Remote Sensing
Dimensions: 4-5/8" X 2-3/8" x 1"
200W-Max-Input
Learn More - ERICSSON - PKG4410PI - DC/DC 3.3VDC 14A OUT,38-72V-IN 3"X2.5"READY TO SHIP - ONLY 50 LEFT IN STOCK!
ERICSSON - PKG4410P - DC/DC Convertor
The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.
Input Voltage: 38-72VDC
Output Voltage: 3.3VDC @ 13.6Amps
45W Output.
Efficiency typ 86% (5 V) at full load
1500 V dc isolation voltage
Terminal Type: PCB
MTBF >200 years at +75 °C casetemperature
Rugged mechanical design andefficient thermal management, max+100 °C case temperature
EMI measured according toEN 55 022 and FCC part 15J
Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.
Made in Sweden
Learn More - VICOR - VI-2N3-CV/B1 - 48VDC to 24VDC 6A 150WSpecial Price $79.95 Regular Price $95.00Out of stock
DC/DC 48VDC-171W-Max TO 24VDC 6.25Amps 150Watts Max with Remote Sensing and Trim 4.5" x 2-3/8" x 1" high - NEW
Learn More - SYNQOR - PQ48033HTA50NNS - DC/DC 48V to 3.3V 50AmpSpecial Price $49.95 Regular Price $75.0048VDC to 3.3VDC at 50Amps "Half-Brick". Isolated, No heatsink, required for heavy current output. Learn More
- Lucent - JW150F1-99W - DC/DC Converter. Used.$44.99DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More
- TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC InputSpecial Price $69.98 Regular Price $89.98
TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC Input
65mm square x 10mm. 20-pins each side.
Made in USA
Learn More - TDK LAMBDA - SM2024D12 - 12VDC 20Watt OUT - 24VDC INSpecial Price $69.98 Regular Price $89.97
TDK LAMBDA - SM2024D12 - DC/DC MODULE fits in special socket. 46mm square x 10.2mm
Status: Discontinued
Case/Package SMD/SMT
Mount: Surface Mount
Efficiency: 80 %
Isolation Voltage: 700 V
Max Input Voltage: 36 V
Operating Temperature: -40 °C to 60 °C
Max Output Current: 830 mA
Max Power Dissipation; 20 W
Min Input Voltage; 18 V
Number of Outputs: 2
Voltage - Output 1: 12 V
Voltage - Output 2: -12 V
Dimensions; Height 10.16 mm, Length 46.482 mm, Width 35.56 mm
MADE IN USA
Learn More - Densei/Lambda - PAH100S48-3.3/V - 3.3VDC 23Amp OUT - 36-76VDC IN$95.883.3V (+/-10% via TRM terminal & external resistor) 23.4Amps Output - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More
- Computer Products - LPS48S15/1000J - DC/DC Converter. 15 Watt.Output: 15VDC 1Amp (1000mA).$55.49DC/DC Converter. 15 Watt.Output: 15VDC 1Amp (1000mA). Input: 48V nominal 20 to 60VDC. Input current: 20mA no load, 380mA full load. Mount: Case "J", PCB, 7 Pin module. Dimensions: approximately 2" x 1.6". New. Learn More
- VICOR - VI-2W3-05 - 24VDC IN to 24VDC @150W / 6.25Amp OUTSpecial Price $189.98 Regular Price $250.00
VICOR - VI-2W3-05 - DC-DC CONVERTER DRIVER MODULE 2
4VDC IN (18-36VDC)
24VDC OUT 150W / 6.25Amp WITH LOGIC CIRCUITRY
Product Type: Isolated DC-DC Converters
Number of Outputs: 1 Output
Output Power: 150 W
Input Voltage, Min: 18 V, Input Voltage, Max: 36 V
Output Voltage-Channel 1: 24 V
Isolation Voltage: 3 kV
Operating Temperature: - 10 C to + 85 C
Package / Case:Full Brick, Through Hole
Dimensions: Length: 117 mm, Width: 61 mm, Height: 12.7 mm
Dimensions: 4-9/16" L x 2-3/8" W x 1-1/8" HIGH
Identical in specs to the VI-BW3-CV-B1
Alternate: Mouser 492-VI-2W3-EV
Learn More - Nemic/Lambda - PAH50S48-3.3 - 3.3Vo 11.7Amp - 36-76VDC Input$95.883.3Vo 11.7Amp - 36-76VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More
- LAMBDA - PM10-12S03 - 3.3V 2.55A Out - 9-18VDC Input$49.883.3Vo 2.55A Out - 9-18Vin DC Input Only 25 x 51mm x 8mm above board. Learn More
- Densei/Lambda - PAH50S48-24/V - 24V 2.1Amp Out - 36-75VDC Input$95.8824V 2.1Amp Out - 36-75VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More
- Densei/Lambda - PAH200S48-28 - 28V 7.2A Out - 36-76VDC In$95.8824V (-40% to +10% via TRM terminal & external resistor) 7.2A Output - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More
- VICOR - VI-BW3-01-B1 - 24V In 24VDC Out 150W / 6.25A BoosterSpecial Price $139.95 Regular Price $175.00DC-DC CONVERTER BOOSTER MODULE 24VDC IN (18-36VDC) 24VDC OUT 150W / 6.25Amp NO LOGIC CIRCUITRY MUST RUN WITH THE VI-2W3-05-B1 FOR BOOSTING THE OUPUT POWER W/ Chassis-mount module housing features screw/lug Wiring Interface Dimensions: 4-9/16" L x 2-3/8" W x 1-1/8" HIGH Identical in specs to the VI-BW3-CV-B1 Learn More
- VICOR - VI-J53-04 - DC/DC Converter. 24VDC 50W. Used.$50.00DC/DC Converter. Input: 150VDC 75 watt. Output: 24VDC 50 watt. Module: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm). Used/Removed from equipment. Learn More
- Texas Instruments - PT4662A - NEW DC/DC CONVSpecial Price $119.95 Regular Price $138.00CONV DC-DC 3.3/2.5VIN 15A HRZ FACTORY NEW Learn More
- Phoenix Contact - QUINT-DC-UPS/24DC/10 - 2866226 - Uninterruptible Power Supply 24 VDC, 10Amps.Special Price $249.00 Regular Price $742.79Out of stock
Phoenix Contact - QUINT-DC-UPS/24DC/10 - 2866226 - Uninterruptible Power Supply
The QUINT DC to DC UPS is a family of 24 VDC uninterruptible power supplies that are scalable and DIN-Rail mountable. The QUINT-DC-UPS/24DC/10 has a built in battery which provides up to 10 amps via its integrated 1.3 Ah battery module.
Input: 10.5Amp 24VDC.
Input Voltage Range: 22.5 to 30 VDC
Output: 10Amp 24VDC.
Dimensions: 100mm x 130 mm x125 mm
Weight: 1.8 kg
Operating Temperature: 0C to 50C
Note 1: Alt P/N: 2866226.
Note 2: From the older manufactures date the internal 1.3 Ah battery Module must be replaced. Note the significant price reduction.
Last one (New Old Stock) was our store display without box and was further price reduced.
UNSPSC Code 32000000.
Learn More