DC to DC Converter
- MODUPOWER - MP9003 by MPI - 5V to 12VDC 300MA DC-DC CONVERTER$7.95IN STOCK - MORE THAN 500 READY TO SHIP!
MODUPOWER - MP9003
5V to 12VDC 300MA
DC-DC CONVERTER 24(23)-pin 33.5mm x 14.8mm x 12mm above board.
Tubed, New.
Made in USA
Learn More - Vicor - VI-2W0-CX - DC/DC Converter. Output: 5VDC 75W. New.READY TO SHIP - ONLY 44 LEFT IN STOCK!
Vicor - VI-2W0-CX - DC/DC Converter.
Series VI-200™ (75W)
Packaging Bulk
Part Status Active
Type Isolated Module
Number of Outputs 1
Voltage - Input (Min) 18V
Voltage - Input (Max) 36V
Voltage - Output 1 5V
Current - Output (Max) 15A
Power (Watts) 75W
Voltage - Isolation 3kV
Applications ITE (Commercial)
Features OCP, OTP, OVP, SCP
Operating Temperature -25°C ~ 85°C
Efficiency 90%
Mounting Type Through Hole
Package / Case Full Brick
Size / Dimension 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm)
Note: Factory New. Non RoHS.
Learn More - POWER ONE - DGP20E48T5/15 - Power Supply. DC Converter. Output: Triple Output 5V 2.5A, 15V 250mA, and -15V 250mA .
POWER ONE (Bel Power Solutions) - DGP20E48T5/15 - Power Supply / IGBT Module.
Status: Discontinued
DC/DC Converter.
Input Voltage to 48V.
Triple Output: 5V 2.5A, 15V 250mA, and -15V 250mA.
Power: 20 Watt. Isolated.
Voltage-Isolation: 700V.
Input: 36V min, 72V max.
Operating Temperature: -55 to 100 Deg C.
Mount: PCB.
Package: 7 Pin Module.
Approvals: UL, CSA, RU, TUV
Dimensions: 2.02" L x 2.02" W x 0.45" H (51.3mm x 51.3mm x 11.4mm).
DC-DC converter (ex. Board Mount type, Off-board type) to work properly, it usually needs a minimum load for each output. The minimum load is to ensure that the DC-DC converter can operate within the manufacturer's specification.
Note: Genuine Power One - Made in Mexico
Learn More - International Power Devices - DUS505 - DC/DC Converter.Special Price $108.98 Regular Price $135.00
International Power Devices - DUS505 - DC/DC Converter
Voltage In 4.65V to 5.50V
Isolated Voltage-out 5V at 1000mA
Mount: PCB, 4 Gold Pins
Efficiency 76%
Dimensions: 2" x 1" x 0.4"
Hermetically Sealed.
Made in USA - New Old Stock - Rare
Learn More - ASTEC - AK60A-024L-022F10G - 2.2VDC 10Amp OUT 18-36VDC INSpecial Price $87.99 Regular Price $118.952.2V 22W 10Amp Output - 24VDC(36-18V 34Watts-Max)-INPUT 2.4" x 2.3" x 0.5" plus Sixteen pins 0.2" high "Share, Enable, Clk-In, RSV, V Adj, Remote Sensing"AMPSS POWER MODULE - "For evaluation - subject to change" NEW APS E132002 Hi-pot tested UL&CSA Learn More
- ASTEC - AA30A-048L-120D - DC/DC Converter. Output: +/-12V 30Watts.$24.95DC/DC Converter. Output: +/-12V 30Watts. Input: 48V(-35 to -60VDC@ 1.2A). Dimensions: 3" square x 0.4" high, 9 pin. Listed: UL and CSA-Level3. Learn More
- ASTEC - AA20B-012L-033S - DC-DC Converter. (9 to 36) V to 3.3 V.$44.95DC-DC Converter. Input: 9 to 36V. Output: 3.3V at 4.5Amp. Dissipation: 15 Watt. Package: PCB 6 pin module. Learn More
- VICOR - VI-J0Z-IY - NEW 12V-to-2VDC 10A DC/DCSpecial Price $249.99 Regular Price $289.002VDC@10A-Output - 12VDC@30WATTS Input DC/DC 2.3"x2.3"x0.75"HCONT OPERATION 9-MODULE W/GROUNDING BASEPLATEFUSE REQ 8A 60V Learn More
- VICOR - VI-BN3-CV/B1 - 48VDC to 24VDC 150W DC/DCSpecial Price $79.95 Regular Price $95.97READY TO SHIP - ONLY 6 LEFT IN STOCK!
VICOR - VI-BN3-CV/B1 48VDC TO 24VDC DC/DC Converter
With Trim and Remote Sensing
Dimensions: 4-5/8" X 2-3/8" x 1"
200W-Max-Input
Learn More - ERICSSON - PKG4410PI - DC/DC 3.3VDC 14A OUT,38-72V-IN 3"X2.5"READY TO SHIP - ONLY 50 LEFT IN STOCK!
ERICSSON - PKG4410P - DC/DC Convertor
The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.
Input Voltage: 38-72VDC
Output Voltage: 3.3VDC @ 13.6Amps
45W Output.
Efficiency typ 86% (5 V) at full load
1500 V dc isolation voltage
Terminal Type: PCB
MTBF >200 years at +75 °C casetemperature
Rugged mechanical design andefficient thermal management, max+100 °C case temperature
EMI measured according toEN 55 022 and FCC part 15J
Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.
Made in Sweden
Learn More - ASTEC - AA03A-005L-050S - 5V Out 3W - 5V-In$19.755VDC In - 5VDC Out 5W 2" x 1" x 0.4" plus 4-pins UL-approved NEWManuf in Mexico Learn More
- VICOR - VI-2N3-CV/B1 - 48VDC to 24VDC 6A 150WSpecial Price $79.95 Regular Price $95.00Out of stock
DC/DC 48VDC-171W-Max TO 24VDC 6.25Amps 150Watts Max with Remote Sensing and Trim 4.5" x 2-3/8" x 1" high - NEW
Learn More - SYNQOR - PQ48033HTA50NNS - DC/DC 48V to 3.3V 50AmpSpecial Price $49.95 Regular Price $75.0048VDC to 3.3VDC at 50Amps "Half-Brick". Isolated, No heatsink, required for heavy current output. Learn More
- Nemic/Lambda - PC6-48-5 - 5Vo 1.2Amp OUT - 36-72VDC Input$69.88IN: 36-72VDC Output 12VDC +/-5% 0 - 1200mA 3Watts - (Adjustable with TRM terminal) DC/DC Converter - Output current limiting, automatic recovery - Only 20 x 28mm, 7.8mm above board. SHIELDED in five dimensions. Learn More
- Lucent - JW150F1-99W - DC/DC Converter. Used.$44.99DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More
- TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC InputSpecial Price $69.98 Regular Price $89.98
TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC Input
65mm square x 10mm. 20-pins each side.
Made in USA
Learn More - TDK LAMBDA - SM2024D12 - 12VDC 20Watt OUT - 24VDC INSpecial Price $69.98 Regular Price $89.97
TDK LAMBDA - SM2024D12 - DC/DC MODULE fits in special socket. 46mm square x 10.2mm
Status: Discontinued
Case/Package SMD/SMT
Mount: Surface Mount
Efficiency: 80 %
Isolation Voltage: 700 V
Max Input Voltage: 36 V
Operating Temperature: -40 °C to 60 °C
Max Output Current: 830 mA
Max Power Dissipation; 20 W
Min Input Voltage; 18 V
Number of Outputs: 2
Voltage - Output 1: 12 V
Voltage - Output 2: -12 V
Dimensions; Height 10.16 mm, Length 46.482 mm, Width 35.56 mm
MADE IN USA
Learn More - International Power Devices - BWD4805 - 48V in +/-12V OutSpecial Price $79.95 Regular Price $95.00Dual output 2.5Watt Module Inverters 48V in +/-12V Outwww.alldatasheet.com Learn More
- Densei/Lambda - PAH75D48-5033 - Dual Outputs 3.3V and 5VDC 15Amp 75W - 48VDC In$95.883.3VDC and 5VDC AT 15Amps 75Watts Max - +/-10% via TRM terminal & external resistor - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More
- Densei/Lambda - PAH100S48-3.3/V - 3.3VDC 23Amp OUT - 36-76VDC IN$95.883.3V (+/-10% via TRM terminal & external resistor) 23.4Amps Output - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More
- Computer Products - LPS48S15/1000J - DC/DC Converter. 15 Watt.Output: 15VDC 1Amp (1000mA).$55.49DC/DC Converter. 15 Watt.Output: 15VDC 1Amp (1000mA). Input: 48V nominal 20 to 60VDC. Input current: 20mA no load, 380mA full load. Mount: Case "J", PCB, 7 Pin module. Dimensions: approximately 2" x 1.6". New. Learn More
- Conversion Devices Inc CDI - 212S24FR - DC/DC Converter. 2.5W. Output: 12V 165mA.Special Price $64.95 Regular Price $84.95
Conversion Devices Inc CDI - 212S24FR - DC/DC Converter.
Conversion Devices, Inc. designs and manufacturers medical grade linear and switching ac/dc and dc/dc power supplies to OEM's for use in medical and Industrial.
High Quality Overstock from a Medical Equipment Manufacturer
2.5Watt.
Input: 24V.
Output: 12V 165mA.
Mount: PCB Through Hole.
Package: 24 Dip.
New Old Stock - Rare
Learn More - Burr Brown - PWR1219 - DC/DC Converter. 12VDC 250mA.$65.00DC/DC Converter. 3 Watt, unregulated. Input: 24VDC. Output: 12VDC 250mA. Mount: PCB 12 Pin. Learn More
- Burr Brown - PWR1105 - +/-12V +/100mA Out - 5V-inputSpecial Price $64.95 Regular Price $89.001.5 WATT 24-pin DIP Unregulated +/-12V +/104mA Out - only 5V-input NEW DC/DC BEAUTIES, in tubes. Learn More