DC to DC Converter

MODUPOWER - MP9003

5V to 12VDC 300MA

DC-DC CONVERTER 24(23)-pin 33.5mm x 14.8mm x 12mm above board.

Tubed, New.

Made in USA

Learn More

15V 150W-max OUT - 48VDC-In(36-75V 188W-max) AMPSS POWER MODULE2.3" x 2.4" x 0.5" plus sixteen 0.25"-leads SENSING,V-ADJ, SHARE, ENABLE, CLK-IN - "For Evaluation - Subject to change" NEW - APM-trademark $155.35 LIST Learn More

DC/DC Converter. Output: +/-12V 30Watts. Input: 48V(-35 to -60VDC@ 1.2A). Dimensions: 3" square x 0.4" high, 9 pin. Listed: UL and CSA-Level3. Learn More

ASTEC - AA05A-024L-150S - Power Supply.

Input: 9-36V.

Output: 15V 5 watt.

Isolated Output.

Shielded.

Mount: PCB.

Operating Temp: -25 C to 71 C

Dimensions: 2" x 1" x 0.4" High, 4 leads.

Listed: UL.

Note: Double marked QA13-030-18 and MAS4030-8.

Learn More

2VDC@10A-Output - 12VDC@30WATTS Input DC/DC 2.3"x2.3"x0.75"HCONT OPERATION 9-MODULE W/GROUNDING BASEPLATEFUSE REQ 8A 60V Learn More

VICOR - VI-BN3-CV/B1 48VDC TO 24VDC DC/DC Converter

With Trim and Remote Sensing

Dimensions: 4-5/8" X 2-3/8" x 1"

200W-Max-Input

Learn More

DC/DC 48VDC-171W-Max TO 24VDC 6.25Amps 150Watts Max with Remote Sensing and Trim 4.5" x 2-3/8" x 1" high - NEW

Learn More

TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC Input

65mm square x 10mm. 20-pins each side.

Made in USA

Learn More

TDK LAMBDA - SM2024D12  - DC/DC MODULE fits in special socket. 46mm square x 10.2mm

Status: Discontinued

Case/Package    SMD/SMT

Mount: Surface Mount

Efficiency: 80 %

Isolation Voltage: 700 V

Max Input Voltage: 36 V

Operating Temperature: -40 °C to 60 °C

Max Output Current: 830 mA

Max Power Dissipation; 20 W

Min Input Voltage; 18 V

Number of Outputs: 2

Voltage - Output 1: 12 V

Voltage - Output 2: -12 V

Dimensions; Height 10.16 mm, Length 46.482 mm, Width 35.56 mm

MADE IN USA 

Learn More

Dual output 2.5Watt Module Inverters 48V in +/-12V Outwww.alldatasheet.com Learn More

Cosel - ZUS1R5-2415 - DC/DC Converter.

Output Voltage: 15V.

Current: 100ma.

Dissipation: 1.5 watt.

Dimensions: 27.5mm wide x 18mm deep x 7mm high.

Package: 4Pin PCB module.

Manufactures specification sheet is available.

Factory New

Learn More

Conversion Devices Inc  CDI - 212S24FR - DC/DC Converter.

Conversion Devices, Inc. designs and manufacturers medical grade linear and switching ac/dc and dc/dc power supplies to OEM's for use in medical and Industrial.

High Quality Overstock from a Medical Equipment Manufacturer

2.5Watt.

Input: 24V.

Output: 12V 165mA.

Mount: PCB Through Hole.

Package: 24 Dip.

New Old Stock - Rare

Learn More

DC/DC Converter. 3 Watt, unregulated. Input: 24VDC. Output: 12VDC 250mA. Mount: PCB 12 Pin. Learn More

1.5 WATT 24-pin DIP Unregulated +/-12V +/104mA Out - only 5V-input NEW DC/DC BEAUTIES, in tubes. Learn More

DC/DC Converter. Dual output. Output: 3.3V / 2.5V 4Amp. 13.2 watt / 10 watt. Input: (24V) 18-36V. Case: 2.00" L x 1.56" W x 0.50" H (50.8mm x 39.6mm x 12.7mm). 30 Pin. Learn More

20-70VDC-IN 12V 1.25A OUTPUT - 2" x 2" x 0.4" plus Seven 0.25" leads - NEW Learn More

VICOR - VI-2W3-05 - DC-DC CONVERTER DRIVER MODULE 2

4VDC IN (18-36VDC)

24VDC OUT 150W / 6.25Amp WITH LOGIC CIRCUITRY

Product Type: Isolated DC-DC Converters

Number of Outputs: 1 Output   

Output Power: 150 W    

Input Voltage, Min: 18 V, Input Voltage, Max: 36 V           

Output Voltage-Channel 1: 24 V

Isolation Voltage: 3 kV  

Operating Temperature: - 10 C to + 85 C

Package / Case:Full Brick, Through Hole

Dimensions: Length: 117 mm, Width: 61 mm, Height: 12.7 mm  

Dimensions: 4-9/16" L x 2-3/8" W x 1-1/8" HIGH

Identical in specs to the VI-BW3-CV-B1

Alternate: Mouser 492-VI-2W3-EV

Learn More

Bipolar Output +/- 12V 0.42A each 18-36VDC-In 0.71A Small <1"x2"x0.38"high. UL VDE CSA Good Housekeeping Seal of Approval, maybe. Learn More

24V 2.1Amp Out - 36-75VDC Input +/-10% Out Adjustment via TRM terminal & external resistor - - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More

24V (-40% to +10% via TRM terminal & external resistor) 7.2A Output - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More

DC/DC 5V-IN +15V 100ma Learn More

Conversion Devices Inc  CDI - 215S24FR - DC/DC Converter.

Conversion Devices, Inc. designs and manufacturers medical grade linear and switching ac/dc and dc/dc power supplies to OEM's for use in medical and Industrial.

High Quality Overstock from a Medical Equipment Manufacturer

2.5Watt.

Input: 24V.

Output: 15V 133mA.

Mount: PCB Through Hole.

Package: 24 Dip.

New Old Stock - Rare

 

Learn More

DC-DC CONVERTER BOOSTER MODULE 24VDC IN (18-36VDC) 24VDC OUT 150W / 6.25Amp NO LOGIC CIRCUITRY MUST RUN WITH THE VI-2W3-05-B1 FOR BOOSTING THE OUPUT POWER W/ Chassis-mount module housing features screw/lug Wiring Interface Dimensions: 4-9/16" L x 2-3/8" W x 1-1/8" HIGH Identical in specs to the VI-BW3-CV-B1 Learn More

DC/DC Converter. Input: 150VDC 75 watt. Output: 24VDC 50 watt. Module: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm). Used/Removed from equipment. Learn More