DC to DC Converter

MODUPOWER - MP9003

5V to 12VDC 300MA

DC-DC CONVERTER 24(23)-pin 33.5mm x 14.8mm x 12mm above board.

Tubed, New.

Made in USA

PULS - CD5.121 - DC/DC Converter, DIN Rail Supply, In 24VDC, Output 12VDC 96W

DIMENSION CD (92 ~ 120W)

Input Type: DC

Number of Outputs: 1

DC Voltage - Input (Min): 18V

DC Voltage - Input (Max): 32.4V

Voltage -  12VDC (Adjustment Range 12 -15V)

Current - Output (Max): 8A

Power (Watts): 96W

Power Reserves: 20% Power Boost 

Ripple and Noise Voltage Max.: 75mVpp

Applications: ITE (Commercial)

Efficiency: 88.2%

Operating Temperature: -25°C ~ 70°C (With Derating)

Size / Dimension: 4.02" L x 1.26" W x 4.88" H (102.0mm x 32.0mm x 124.0mm)

Approval Agency: ABS, ATEX, CSA, DNV GL, EAC, IEC, IECEx, UL

Standard Number: Class I Div 2; 508; 60950-1

Alternate: Digi-Key 1738-1023-ND 

Factory New

Designed in Germany, Assembled in China

In Manufacturer's Packaging with Instructions

POWER ONE (Bel Power Solutions) - DGP20E48T5/15 - Power Supply / IGBT Module.

Status: Discontinued

DC/DC Converter.

Input Voltage to 48V.

Triple Output: 5V 2.5A, 15V 250mA, and -15V 250mA.

Power: 20 Watt. Isolated.

Voltage-Isolation: 700V.

Input: 36V min, 72V max.

Operating Temperature: -55 to 100 Deg C.

Mount: PCB.

Package: 7 Pin Module.

Approvals: UL, CSA, RU, TUV

Dimensions: 2.02" L x 2.02" W x 0.45" H (51.3mm x 51.3mm x 11.4mm).

DC-DC converter (ex. Board Mount type, Off-board type) to work properly, it usually needs a minimum load for each output. The minimum load is to ensure that the DC-DC converter can operate within the manufacturer's specification.

Note: Genuine Power One - Made in Mexico

International Power Devices - HBS150YR-A - DC/DC Converter.

Status: Discontinued

Single output

9V 16Amp 150 watt.

Input: 24VDC. Open frame, half brick.

New.

International Power Devices - DUS505 - DC/DC Converter

Voltage In 4.65V to 5.50V

Isolated Voltage-out 5V at 1000mA

Mount: PCB, 4 Gold Pins

Efficiency 76%

Dimensions: 2" x 1" x 0.4"

Hermetically Sealed.

Made in USA - New Old Stock - Rare

Endicott Research Group ERG - E505-.4050U DC/DC Converter.

ERG’s E505-.4050U is a 500 Series DC-DC converter that converts a 5 VDC input voltage to 40 VDC@ 50mA, unregulated. There are many custom variations within each Series.

5VDC to 40VDC 50mAmps DC -DC CONVERTER

E 500 Series Unregulated Encapsulated

New 5-Pin module PCB Mount

Overall Dimensions: 1.4" (35.7mm) wide x 1" (25.4mm) deep x 0.777" (19.7mm) tall.

Additional Information: http://ergpower.com/pdf30/DC_DC_Converters.pdf 

Applications: The voltage needed could be for any number of applications, such as an ink jet printer used for CAD drawings or medical data where each jet needs 40 VDC to operate and that voltage is not in the system; so a DC-DC converter can be installed to convert 12 VDC to 40 VDC for each jet. Other applications that ERG’s DC-DC converters are used for include fuel pumps, test equipment and many others.

Proudly Made in USA

Endicott Research Group ERG - E1353 Voltage Inverter Converter

ERG has been matching DC-AC inverters to backlit LCDs since 1979 for customers in the USA and around the world. ERG offers the industry’s widest range of DC-AC inverters for powering CCFL-backlit flat panel displays, bar none. Open frame and encapsulated inverters. Single-lamp to 6-lamp inverters.

DC-to-AC Converter

Converts 5 VDC to 200 VAC at 25 kHz.

Mount: PCB (4 Pin)

Encapsulated

Applications: Epson LCD driver. Power to ensure longer useful EL (Electroluminecent Lamp) Lamp Life. ERG supports all major manufacturers of CCFL-, LED- and EL- backlit LCDs, and offers a broad array of standard and custom solutions.

Alternates: EG9013, 8M059013

Proudly Made in USA

EMERSON - HD6976BP - 16-901001171-00 - Power Supply. DC to DC Car Adapter.

Input: 12VDC to 3.6VDC 500mA out.

Regulated Output.

Input: Male Cigarette Plug.

Output: Has a 6 foot 2 Conductor Cable 

Right Angle Barrel Plug, Diameter 3.7mm (0.150:) - Center Positive

Fuse Protected with replaceable 250mA Fuse in Tip.

Alternate: Model CCA001.

Note: Good option for charging 3.6 volt NiCad and NiMH Batteries or three 1.2VDc Cells.

Applications: Charging of R/C, Robots, Instruments, Tools, Toys, Audio Devices.

CPI - WR24T05-12/55K3 TRIPLE-OUTPUT Wide Input DC/DC Converter

Military Power Supply - COMPUTER PRODUCTS INC STEVENS-ARNOLD DIV

Input Voltage: 18-36VDC

Output Voltage: +5VDC@5A, -12VDC@1.25A, +12VDC@1.25

Efficiency: 81%

Dimensions: 3.5" x 5.5"L x 1.3"H with Optional Terminal Board Screw Connections

Weight: 0.9lbs

NSN: 6130-01-293-0247

Martek Power - CDI - 3005/12T24 DC/DC Converter Module

The 3000LP series is a family of compact 25W to 30W, high performance DC/DC converters. These converters are specifically designed to provide the flexibility, power density, and reliability required to fulfill local power needs in
applications ranging from telecom switch systems to portable instrumentation.

Wattage: 30W

Converts 24VDC to 5VDC@3A 

Efficiency @ Full Load: 80%

Greater than 800,000 MTBF

Note: Now Martek Power formerly CDI Conversion Devices Inc.

New Old Stock

Proudly Made in USA

CALEX - 5D15.150 - DC/DC Converter.

The versatile 5 Watt Dual Output converter is particularly suitable for use in microprocessor systems where 5 Volts is the primary power source, and where a low noise plus and minus output voltage is required.

Status: Discontinued April 2020

Features
• Low Input/Output Noise Operation
• Low Profile Case (0.40”)
• Isolation Capacitance of 50pF
• Extended Operating Temperature Range of -40ºC to +100ºC.
• Fixed Frequency Operation

Input: 5V.

Dual Output: +/-15V 150mA 4.5 watt.

Mount: 5 Pin Module PCB.

Dimensions: 2" Square x 3/8" High.

Proudly Made in the USA.

ASTEC - AA05A-024L-150S - Power Supply.

Input: 9-36V.

Output: 15V 5 watt.

Isolated Output.

Shielded.

Mount: PCB.

Operating Temp: -25 C to 71 C

Dimensions: 2" x 1" x 0.4" High, 4 leads.

Listed: UL.

Note: Double marked QA13-030-18 and MAS4030-8.

VICOR - VI-BN3-CV/B1 48VDC TO 24VDC DC/DC Converter

With Trim and Remote Sensing

Dimensions: 4-5/8" X 2-3/8" x 1"

200W-Max-Input

ERICSSON - PKG4410P - DC/DC  Convertor

The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.

Input Voltage: 38-72VDC

Output Voltage: 3.3VDC @ 13.6Amps

45W Output.

Efficiency typ 86% (5 V) at full load

1500 V dc isolation voltage

Terminal Type: PCB

MTBF >200 years at +75 °C casetemperature

Rugged mechanical design andefficient thermal management, max+100 °C case temperature

EMI measured according toEN 55 022 and FCC part 15J

Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.

Made in Sweden

TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC Input

65mm square x 10mm. 20-pins each side.

Made in USA

TDK LAMBDA - SM2024D12  - DC/DC MODULE fits in special socket. 46mm square x 10.2mm

Status: Discontinued

Case/Package    SMD/SMT

Mount: Surface Mount

Efficiency: 80 %

Isolation Voltage: 700 V

Max Input Voltage: 36 V

Operating Temperature: -40 °C to 60 °C

Max Output Current: 830 mA

Max Power Dissipation; 20 W

Min Input Voltage; 18 V

Number of Outputs: 2

Voltage - Output 1: 12 V

Voltage - Output 2: -12 V

Dimensions; Height 10.16 mm, Length 46.482 mm, Width 35.56 mm

MADE IN USA 

Conversion Devices Inc  CDI - 212S24FR - DC/DC Converter.

Conversion Devices, Inc. designs and manufacturers medical grade linear and switching ac/dc and dc/dc power supplies to OEM's for use in medical and Industrial.

High Quality Overstock from a Medical Equipment Manufacturer

2.5Watt.

Input: 24V.

Output: 12V 165mA.

Mount: PCB Through Hole.

Package: 24 Dip.

New Old Stock - Rare

Burr Brown - 710 IC, Isolated DC/DC Converter.

Quad-isolation.

Package: 14 Pin Module, Gold Leads.

NSN 5962-01-119-6301

New.

VICOR - VI-2W3-05 - DC-DC CONVERTER DRIVER MODULE 2

4VDC IN (18-36VDC)

24VDC OUT 150W / 6.25Amp WITH LOGIC CIRCUITRY

Product Type: Isolated DC-DC Converters

Number of Outputs: 1 Output   

Output Power: 150 W    

Input Voltage, Min: 18 V, Input Voltage, Max: 36 V           

Output Voltage-Channel 1: 24 V

Isolation Voltage: 3 kV  

Operating Temperature: - 10 C to + 85 C

Package / Case:Full Brick, Through Hole

Dimensions: Length: 117 mm, Width: 61 mm, Height: 12.7 mm  

Dimensions: 4-9/16" L x 2-3/8" W x 1-1/8" HIGH

Identical in specs to the VI-BW3-CV-B1

Alternate: Mouser 492-VI-2W3-EV

Adjustable Voltage Regulator Boards LM317T

Dual ST Microsystems LM317T Regulation

Input: up to 27Vdc

Output: 1.2-37VDC 3 AMP (RD0790 Spec's).

Note: All components can be purchase as a kit by ordering SKU 3681

Analog Devices - Linear Technology - LT1109CN8-5 - IC,

DC/DC Converter.

Micropower Low Cost DC/DC Converter

Adjustable and Fixed 5V, 12V