Hydraulic & Pneumatic

ASCO - Automatic Switch Co - Model - HV1744762 - Red Hat Solenoid.

Small 3-way solenoid operated valve with all three pipe connections located in the body. NEMA Type I Solenoid Enclosure. Valves are equipped with a NEMA Type 4 Watertight Enclosure. 

Commercial - General Purpose

Body Design: 3 Way Solenoid Valve

Coil Voltage: 120VAC/60Hz, 110VAC/50Hz

Coil Type: B94, P/N: MP-C-011, 099216-005D, 2 Wire.

Wattage: 10.7 W

Solenoid Enclosure: Watertight

Pressure: 15 PSI Air, Inert Gas & Water.

Material: Brass Valve

Maximum  Fluid Temperature: 200 F

Approximate Lead Length: 18"

1/4" PIPE Three-Way Operation: Normally Open & Normally Closed.

Uses Rebuild Kit 174889 D-7240 DS-796

Dimensions: 45x37x91mm High Including Coil.

Coil: 35x40mm Int. 120V 60Hz 10.7W Ind.

Boxed with Instructions - New Old Stock.

A 726048003 CSA

Proudly Made in USA

Airpot 62820-2 Dashpot. Adjustable air dashpot. Glass 0.74" OD with 2" long shaft with swivel attachment at both ends. Threaded panel mount with nut and threaded with nut at other end.

Airpot’s pneumatic damping products are specifically designed to provide unparalleled damping and energy dissipation accuracy by eliminating friction from their working elements. The materials used have built-in lubricity, high strength-to-weight ratio, excellent stability under temperature/humidity extremes, close coefficients of thermal expansion, and non-deteriorating performance due to age or non-use. The basic parts are a graphitized carbon piston, precision ground to millionths of an inch TIR inside an annealed, borosilicate glass cylinder with a precision fire-polished bore.

BIMBA Flat 1 - FS-090.125-1 - Pneumatic Cylinder 

Bimba Double Acting, single End Rod

Bore: 1-1/16"

Stroke: 0.125"

Mount Type: Basic

Bumper Type: None

Rod Thread: Standard Female

Temperature Option: Standard

Hollow Rod: NO

Rod Wiper: NO

Excellent Slightly Used Condition

NORGREN - RCO21-20-50 - Pneumatic Cylinders.

Pneumatic cylinders, often referred to as pneumatic actuators or pneumatic drives, are used to provide motion and force to industrial automation applications.

Status: Discontinued

Roundline Series

Bore: 20mm 

Stroke: 50mm 

Operating Pressure: 1-10 BAR

Max. Temperature: 80 deg C

Dimensions: 0.867" Diameter x 6.86" Length Rod unextended,

0.312"D Threaded rod with nut

New

Answer Engineering- Turn Act - TA-350-90-PN-8E-8T-400-A00-R82 - PN 122-111-04-20.

Turn Act Pneumatic Rotary Actuator - Special Clean Series Actuator - With Two Solid State Switches

3/4" shaft Two cables AC/DC Reed Switch.

Two 0.436" ID ports.

350-In-Lbs @ 100-PSI

210-In-Lbs @ 60-PSI

deg rotation 4.5-IN-3

Weighs 4.7 pounds.

Approximate Dimensions: 3" square x 7" long plus 1.75" 0.75" rusty keyed shaft.

Excellent condition but slight cosmetic rust on shaft from long term storage. 

Product line imay now be owned by Parker.

Additional Product  Line  Information: http://www.compactautomation.com/CorporateSite/media/itt/Resources/TechnicalData/Turn-Act_Products.pdf?ext=.pdf

Proudly Made in USA

Guaranteed not DOA.

WATTS REGULATOR CO - B-6800 LC - 3-Piece, Full Port, Brass Ball Valves

3-Piece, Full Port, Brass Ball Valves are used in commercial and industrial applications. It features an in-line maintenance design that offers serviceability of all operating parts without disturbing the piping system. The full port orifice ensures maximum flow capacity. Durafill seats, chrome plated brass ball and blow-out proof stem provide maximum safety and highest operating pressure/temperature limits.

Status: Discontinued

Features

• Used in commercial and industrial applications
• Available in several sizes with solder and threaded end connections
• Designed for maximum safety and highest operating pressure and temperature limits
• In-line maintenance design offers serviceability of all operating parts without disturbing the piping system

1.25" Threaded NPT End Connections

LC  Latch-Lok handles latch and lock in closed position only.

Solid Brass and red locking handle.

PARKER WATTS FLUID AIR INC - R119-04CG - Regulator, T-Handle.

High Flow performance for Demanding Applications

1/2" Ports, 0-125 PSA

0-125 PSI Adjustable Regulator (1/2")

Note: Without Gauge

Proudly Made in USA

SUN HYDRAULICS - XICA-XXV - Hydraulic Catridge,

All Ports Blocked Cavity Plug T-16A

F0833/104625

Mark Number 56059

416579

Cartridges

Corrosion Resistant

Cavity Plugs

2 Port, All Ports Blocked.

5000-psI Series-3

SUN HYDRAULICS - EBA 0CH7-AC - Manifold.

Dimensions: 1.75 x 1.7 x 4.9" long.

New

Schroeder Industries - 8ZZ5 - Filter Element

Micron Rating: 5 Microns Absolute

Dimensions: OD Top: 3.115, OD Bottom: 3.115, ID: 1.64, Length: 8.18

End Caps: Corrosion Resistant Steel / Aluminum

Center Tube: Corrosion Resistant Steel

Media: Microglass Fiber Media

Seal: Buna (Nitrile)

Bypass Setting: -

Collapse Rating: 450 psid

Filtration Rating: Bx = 200 Bx[c] = 1000

Hydrafil# : BF-SCH-623746-L8-6MB

Sealed - New in Box.

Norgren Fluidics - 5VS-011 - Low Pressure Drop Indicator.

Provides a visual indication of level of pressure drop across units. Provides indication of condition of filter elements. Domed lens gives wide angle of visibility. Enable pressure drop in various parts of the system to be monitored.

10-32 female unf bottom rotowink pressure indicator

As Removed 

LINCOLN - 877A - 877 Series A 5AMP Metering Dispenser

In QUARTS 0-16-Inner dial

0-4 Outer dial Hand Held

Supply in handle threaded 0.70"ID

15" Long Hose Assembly.

New Old Stock

HYSON - T2B-3000X0.5 XB - Compact Height Nitrogen Gas Spring

HYSON gas springs are highly specified for use in metal stamping dies, injection molds and custom machines. 

• Life in excess of 100,000 stroke meters.
• Cartridge design for easy maintenance.
• Oil pipe prevents oil leaving the springs in a hosed system and helps maintain life of the springs.
• Secondary piston retaining ring offers extra protection.
• Compact height reduces die costs.

Cylinder 2175-PSI 

Stroke Length: 12.7mm (0.5")

Max 150-bar at 15-degrees C.

Gas N2 Nitrogen only.

Dimensions: Diameter 95.2mm, Height Min, 114.2mm, Full Stroke 127mm High

Weight 12 lbs.

KIT #HT2SK-3000

Additional Information: https://www.ajacs.com/metal-forming-catalog/hyson/nitrogen-gas-springs/113-t2-b-series/file

Made in Sweden

Factory New

AMETEK USG - SPEC. No. 45764 - Meters & Gauges, P500 Series.

AMETEK U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure gauges. The Model P500 is a general purpose commercial gauge measuring vacuum pressure, gauge pressure, or compound gauge pressure. These bourdon tube pressure gauges have phosphor bronze or beryllium copper tubes, with brass sockets. The case is black painted steel for durability. 

Pressure Gauge

Size: 2 Inch. Diameter

Type: Bottom Stem

Scale 0-60PSI.

Inlet Fitting: 1/4"LM

Alternate: 16326

Proudly Made in USA

Millennium-Filters MN-HP59NL1925MV HY-PRO Hydraulic Filter, Direct Interchange. 

Millennium-Filters hydraulic cartridges are built to provide superior protection from particles and contamination that can result in inefficiency, downtime. Proper fluid cleanliness levels are critical for components in the hydraulic fluid stream. Types of filtration media used depend on the application. Millennium Filters use microglass media, stainless steel mesh, or paper media. Micron ratings range from 250 microns down to 1 micron. These hydraulic cartridges are essential in reducing operating expenses.

Body Material: Pleated Microglass Media

Brand Name: Millennium-Filters

Item Shape: Round

Length: 19.5 inches

Temperature Rating: -13 degrees fahrenheit to 250 degrees fahrenheit

Material: Pleated Microglass Media

Maximum Pressure: 435 pounds_per_square_inch

Maximum Working Pressure: 435 pounds_per_square_inch

Measurement System: Inch

Model Number: MN-HP59NL1925MV

Part Number: MN-HP59NL1925MV

Particle Retention Size: 20 µm

Seal Material Type: Viton

UNSPSC Code: 40161500

Width: 3 inches

Package Dimensions : 20.4 x 4.3 x 4.2 inches; 4.55 Pounds

Alternate: WIX D56B20EV Direct Interchange

Applications: Hydraulic Fluids, Construction Equipment, Hydraulic System Filter Housings, Hydraulic Circuits, Fluid Contaminants, Hydraulic Maintenance, Hydraulic Components, Hydraulic Fluid Contamination Control, Donaldson Hydraulics, Parker Hydraulics, Pall Hydraulics, Hydac, Schroeder, Eaton Vickers, Mahle, Fleetguard Cummins, Purolator Facet.

PARKER HANNIFIN - Hydraulic Filter Division - 932340Q 10QYM

Hydraulic Filtration Element 3.10" OD x 8.10" Length.

inner Diameter: 1.690"

Filter Type: Pleated Synthetic Elements

Filtration Selectivity Raring: 12 MICRON ABSOLUTE (B12=200)

Maximum Flow: 60 GPM

Operating Temperature Range: -45 TO 225 F

Initial Differential Pressure: 6 PSID

Center Tube: ZINC PLATED CARBON STEEL

End Caps: CARBON STEEL

Hydraulic Filter Div of Parker Hannifin in Metamora OH.

Proudly Made in USA

Alternates: P 031081-3S61, Luber-Finer LH95105V, Carquest 84852

PARKER - Hydraulic Div - 02.50 CCP2HLT24C 7.000 - Hydraulic Cylinder

Heavy Duty, Industrial fordurability and trouble-free operation with superior design and quality to ensure long cylinder service life.

Status: Discontinued

Series: 2H

Bore: 2.50"

Stroke: 7.00"

Operating Temperature:  -10 to 165 F

Fluid Type: Hydraulic Oil

Materials: Steel

3000 PSI.

Specifications Met: ANSI (INFPA) T3 6.7R3 - 2009

Parker - Hydraulic Div.

Additional Information: https://ph.parker.com/us/en/hydraulic-cylinder-heavy-duty-industrial-series-2h-3h-family

Note: LN - Lightly Used

Norgren Fluidics  - 4LD-010-D00+ - 4LD-010 - Check Valve, Miniature.

A check valve is the simplest type of directional control valve used in hydraulic systems. Check valves stop the flow of fluid in one direction and allow free flow in the opposite direction. They are also known as non-return valves. Check valves may be used as prefill valves, bypass valves, pre-tensioning or protection of hydraulic components against pressure surges.

Extremely low crack pressures 10-32 UNF or barbed tube connections Direct in-line mounting Control flow direction in medical equipment, instrumentation systems, and in miniature pneumatic control systems.

Duckbill type check - Non-venting

Material: Body - Aluminum, Duckbill - Epichlorohydrin

Crack Pressure: 8" H2O (Pressure required to produce .001 scfm (28.3 cc/m) forward air flow)

This check valves has a 200 x 200 mesh, stainless steel inlet filter screen to protect the duckbill.

Furnished with two adapters for use with 1/16" ID flexible tubing.

Connection: 10-32 UNF.

Tube Connection.

Genuine Norgren Fluics - New Old Stock

Proudly Made in USA

Noshok - PGL-C-63-N-C-300 - Gauge, Pressure.

0-3000PSI / 0-20000kPa.

Glycerin Filled.

Connection: 1/4" NPT Threaded Shaft.

Dimensions: 2.5" D x 2.5" high x 1.333" deep.

New - Manufactured in Germany.

NORGREN - RM/55463/M/50 - Cylinder, Roundline.

Magnet piston as standard – provides a wide range of control options

Attractive clean- line design – enhances installation appearance

Threaded rear end covers on ∅ 32 mm to ∅ 63 mm simplify mounting

Threaded fixing holes in both end covers – increased mounting versatility

Actuator. Single ended.

Dimensions: 63mm.

Piston rod material: stainless steel (Martensitic).

Strokes: 50mm.

Series A.

New Old Stock 

Note: Cosmetic Scratch from bulk storage.

NORGREN - L74M-4AP-QDN - Lubricator, Micro-Fog.

Excelon® design allows in-line or modular installation

Quick release bayonet bowl.

Flow sensor provides a nearly constant oil/air ratio over a wide range of flows

Highly visible, prismatic liquid level indicator lens on metal bowls

All round (360°) visibility of sight-feed dome for ease of drip rate setting

Micro-fog and oil-fog

250PSIG 17 Bar max.

Flow** scfm (dm3/s): 154 (73)

Port size: 1/2" PTF.

Nominal Bowl Capacity: 7.9 oz

Temperature: 170 Deg F / 80 Deg C max.

Dimensions: 3.15" Wide x 9.07" High

Weight: 1.61 (0.73)

New

NORGREN - L64M4APQDN - Lubricator, Micro-Fog.

Olympian Plus plug in design

Constant oil density output with varying flow

Easy fill with quick release bayonet bowl

High visibility prismatic sight glass

Use Micro-Fog models in applications with one or more points of lubrication.

Use Oil-Fog models to lubricate a single tool, cylinder or other airdriven device.

250PSIG 17 Bar max.

Port size: 1/2".

Temperature: 170 Deg F / 80 Deg C max.

Note: Marked L64M-NNP-QDN.

Factory New

NORGREN - K79DA00KS6KV2 - Directional Control Spool Valve.

Nugget 200 Directional Control Spool Valve.

Long Lasting Spool Design

High Flow Compaact Valve

110 50Hz/120V 60Hz 8VA.

Vacuum to 150PSI.

Operating Temperature: 120 Deg F.

New

NORGREN - B64G4AKAD3RMN - Filter Regulator Assembly.

Port Size: 1/2" (0.50")

Flow† scfm (dm3/s): 225 (106)

Inlet: 250 PSIG 17 Bar.

Range: 6-150 PSIG -.4 - 10 Bar.

Temp: 175 Deg F / 80 Deg C.

Weight: 3.69 il (1.55kg)

Replacement Element: 4338-01 um

Olympian PLUS Plug-in System.

Effective liquid removal and particulate filtration

Large filter element area provides minimum pressure drop

High flow unit with large valve and diaphragm

Push to lock adjusting knob with tamper resistant option

New