Other Process Control

EATON CUTLER HAMMER OPCON - 1550B-6501 - Photoelectric Fiber Optic Sensor.

Enclosure Material: Body: Noryl, Lens: Nylon

Environmental Rating: NEMA 1,3,4,12,13

Input Voltage: 90-132 Vac

Led Indicators: Red output status

Operating Mode: Fiberoptic, Infrared

Operating Temperature: -40° to 158°F (-40° to 70°C)

Sensor Type: Fiberoptic

Switch Type: Photoelectric

Alt P/N: 106983.

UPC 782113825595

Made in USA 

New

WILKERSON INSTRUMENT CO - DIS971-24 (2) or (3).

The DIS971-24 provides a display, optional isolated DC output voltage or current proportional to a DC input signal, and optional alarm setpoints. All Wilkerson products are designed with RFI filters and lightning protection to reduce susceptibility to electrical noise and damage by lightning. The digital display utilizes an auto-zero dualslope integrating A/D converter for accuracy and stability. The instrument contains a 24 VDC transmitter power supply specifically designed for use with two-wire and other 24 VDC powered transmitters.

4-20mA PROCESS INDICATOR 0-100.0%

4-1/4 Digit display

115VAC TX SUPPLY 24VDC

Option:US 3.62" X 1.77" behind panel 5.5"deep 

Two mounting cam-screws allow the securing of the DIS471 to the panel from the front.

With 24 VDC Power for Two-Wire Transmitter And Optional Alarms and Re-Transmit Output

NEW One with RED(2) 0.5"digits Or your choice of one with GREEN(3) digits.

New

Clarostat Honeywell SKAN-A-MATIC - R42217 - R42217-115 - Relay Amplifier.

Relay 115VAC. Led modulating Amps offers complete control to provide photoelectric immunity to ambient light. Each will operate ONE LED refrlective skanner or Thrubeam pair but Can Not be used with incadescent sources.

Provides modulated light source power

Amplifies the phototransistor signal and functions as an output switch

DELAY-ON 0.05 - 3 Second Timing Range

LIGHT Energized.

Case: Plastic Enclosed 11 Octal Plug-in Mount.

Dimensions: 5.91 x 5.91 x 5.91 inches; 2.2 Pounds

Note: Scan-A-Matic is a Clarostat Division of Honeywell Company

New Old Stock

Made in USA

ISSC/Kanson Electronics - 1013-1-G-2-B - Relay, Time Delay.

Input: AC.

Contacts: 1 NO, 1 NC.

Coil Voltage: 115VAC 50/60Hz.

Timing Function: Off delay.

Timing Range: 0.06 - 10.0 second, range 93446.

Note: Output: 10Amp, 1/3HP 125/250VAC.

NIB, with manufactures specification sheet.

STI CCD - 839-00146 - 48-65Hz Frequency Sensor Module

Input Voltage: 115VAC+/-10% Single Phase

Setting Fequency Point Frequency Adjustable  48 - 65 Hz

Set Point Accuracy 2%

DPDT-OUTPUT

Screw Adjustment

Connections: 9 solder Terminal Hooks

Genine STI - New Old Stock

Clarostat Honeywell SKAN-A-MATIC - R40100 - Amplifier Relay with Power Supply.

Status: Discontinued

Complete photoelectric control
■ Open collector, relay, or solid state relay output
■ Output indicator LED
■ 15 turn sensitivity adjustment
■ Regulated DC power supply
■ May be wired LIGHT or DARK energize

115VAC input.

5 Amp Relay

11 Pin Plug-in Module. 

Operates with one reflective skanner or thrubeam pair, Not supplied.

Note: Used Removd from Equipment

Made in USA

RED LION CONTROLS - APS01000 - Power Supply

The Model APS is an unregulated +12 VDC supply designed to load share when connected in parallel with internal power supplies of many Red Lion Controls Counters and Rate Indicators. It can also be used as a general purpose “Stand-alone” power supply to power other control circuits, sensors and
accessories. The APS is designed for 115 VAC ±10%, 50/60 Hz primary supply. Operating temperature range is -20° to +50°C. Output current is per regulation curve.

Input: 115VAC 50/60Hz

Output: +12VDC 100mA Unregulated.

8-pin Octal plug-in Style

Operating temp -20 to +50 deg C

Dimensions: 2.4" x1.8" x 3.6" High.

New

EATON COTLER HAMMER OPCON - 8880CS6062 SPCL - AC TRIAC CONTROL MODULE OUTPUT

This Triac operates as a single pole single throw solid state relay for switching non-capacitive AC loads.  

Voltage:115VAC 50/60HZ

Current: 1AMP

TRIAC INPUT 115VAC 50/60HZ 2VA MAX.

With LT/DRK Selectro Switch and Sensitivity Control

Operating Temperature: -40 C to 55 C (-40 F to 167 F)

Approvals: UL, CSA

8880CS6062 is a Special and has a 4 Pin connector ( See Attached Instuctions.) 

With Instruction in Manufacturs Packaging

Made in USA

Factory New Old Stock