Timers & Counters

Relay, time delay. Contactor: 240VAC 10A. Coil: 24VDC. Connection: Octal. Electrical conf: DPDT. Body: 1.75 x 2.4 x 3.6" above socket. Weight: 5 oz. Time delay: 0.1 sec - 2 hrs. 16-Ranges via four top-mounted DIP switches. Min/max Control pot on top. Upon application of the control voltage (24) the relay contacts transfer for the preset time, then switch back. Input voltage must be removed and reapplied to reset the time delay . Learn More

Meter, hour. Time meter. Resettable, to 1/10 Hour, 6 Digit, 240VAC 60 Cycle. Dimensions: 3-1/2" square face. Body: 2.183" (55.4mm) D x 3.5" behind panel. Type 236. NIB, N/P 227879. Mount: panel. With 4 screws 3.169" (80mm) centers. Made in the USA. Note: No boxes, no hardware. Learn More

M.H. RHODES - 5MA708 Timer, mechanical. 15Amp 120-240VAC 1/3HP 4 minutes, NC contacts. Dimensions: 2-5/16" round x 1-1/4" high plus bottom screw contacts. Threaded bushing length: 1/3" long. Shaft length: 7/16" long. Listed: CSA.

Learn More

OMROM - H5CL-A Timer, Digital.

12VDC 50mA, 9.999s to 9999h.

Source: 100-240VAC 50/60Hz 10VA.

DIN 48 x 48 mm.

Base: 11 Octal.

Made in Japan

New Old Stock

Learn More

EAGLE SIGNAL / DANAHER - 191-11B601 B82 - 0-8 HOUR TIMER

For over 70 years, Eagle Signal has been the leading supplier of timer solutions for a range of industrial applications all over the world.The Model 191 is a push-button start, motor driven timer with cycle progress pointer, double make-double break snap action switch and is used to energize a load for a preset time period. The pushbutton is located in the center of the time set pointer knob on the panel mounted dial. When depressed momentarily, a mechanical latch and switch is engaged, starting the motor and timing period. After completion of timing, switch 3 and 4 open, 1 and 2 close, motor stops, and timer resets to setpoint. Timer is now ready for another timing operation.

Voltage: 120/240VAC 60Hz, 1/2hP 125VAC, 3/4HP 250VAC 

Current Rating: 10A

Repeat Accuracy: 1.5% of Full Scale

Termination: Motor - Loose Leads, 20 Ga., 6" long stripped 5/8"

Termination Switch: .188 x .250 x .020 Quick Connect Tabs

LR27967

PUSH BUTTON AUTO-RESET TIMERDANAHER 

GW-EAGLE SIGNAL INDUSTRIAL CONTROLS

Approvals: UL, CSA

Made in USA

Manufacturer's Specification In Package.

New Old Stock

Learn More

8 Digit Resetable Counter.One input for voltage counting level of 48-240vac and or one input for 5 to 50 V AC/DC. Counting speed is 40 Hz max. For sinking or sourcing use 5-50vdc.Unit has one lithium battery inside which says should last up to 8 years. Learn More