Reed Relay
- CP Clare & Co. - HGRM52112S05 - Relay Mercury Wetted Reed Relay, Contacts SPDT 100VA, 3V Coil.READY TO SHIP - ONLY 40 LEFT IN STOCK!
CP Clare & Co. - HGRM52112S05 Relay Mercury Wetted Contacts Reed Relay, SPDT 100VA, 3V Coil.
Relay, Mercury Hg.
Form: C, Bistable
Contacts: SPDT.
Contact Ratings: 100VA.
Coil Winding: Bifilar.
Coil Voltage: 3 V Typical, 5 V Max.
Coil Resistance: 26 Ohm.
Current: 5 Amps
Switching Frequency: 200 Hz
Operating Temperature: -38 C to 85 C
Mech Mtg: PCB, Unshielded.
Size: 1.61x 0.565 x 0.435" high.
Weight: 15 Grams
Note: Mercury Wetted. Signaaling.
UL Recognized, CSA certification, FCC68 Compatible
Learn More - CP Clare & Co. - HGJ2MT54211P02 - Relay Mercury Wetted Contacts DPDT 100VA-24VDCIN STOCK - MORE THAN 100 READY TO SHIP!
CP Clare & Co. - HGJ2MT54211P02 - Relay Mercury Wetted Contacts
Relay, Mercury Hg.
Contacts: DPDT.
Contact Ratings: 100VA.
Coil Voltage: 24VDC.
Coil Resistance: 1400 Ohm.
Mech Mtg: PCB, shielded.
Size: 1.6 x 1.0 x 0.4" high.
Weight: 0.8 oz.
Note: Mercury Wetted. High sensitivity. Singe-sided stable, 1mS response.
Learn More - Unidentified MFG - 159-157-RA1 - Relay, Reed. SPDT Mercury Hg-Wetted, Form C,IN STOCK - MORE THAN 1,000 READY TO SHIP!
159-157-RA1 Relay, Reed. Mercury Hg-Wetted, Form C.
The mercury-wetted contact relay represents one of the more sophisticated types of relays made today. The early pioneer work in mercury-wetted contact switching dates back to the 1950’s, as telephone laboratory scientists sought out the “perfect contact”.
Reed relays use an external electromagnet to control the reed switch. The contacts are of magnetic material and the electromagnet acts directly on them without requiring an armature to move them. Sealed in a glass tube, the contacts are protected from corrosion. Mercury-wetted relays are fast in operation and have relatively good load carrying capacity and long life. The mercury films are reestablished at each contact closure and contact erosion is eliminated. The mercury films are stretchable, there is no contact bounce and because it is a mercury contact, the contact resistance is very low and idea for low level switching applications.
A mercury-wetted reed relay is a form of reed relay that employs a mercury switch, in which the contacts are wetted with mercury. Mercury reduces the contact resistance and mitigates the associated voltage drop. For high-speed applications, the mercury eliminates contact bounce, and provides virtually instantaneous circuit closure. Mercury wetted relays are position-sensitive and must be mounted according to the manufacturer's specifications. Because of the toxicity and expense of liquid mercury, these relays have increasingly fallen into disuse.
The high speed of switching action of the mercury-wetted relay is a notable advantage. The mercury globules on each contact coalesce, and the current rise time through the contacts is generally considered to be a few picoseconds. However, in a practical circuit it may be limited by the inductance of the contacts and wiring. It was quite common, before restrictions on the use of mercury, to use a mercury-wetted relay in the laboratory as a convenient means of generating fast rise time pulses, however although the rise time may be picoseconds, the exact timing of the event is, like all other types of relay, subject to considerable jitter, possibly milliseconds, due to mechanical imperfections. The only major weakness of a mercury wetted contact relay is the necessity to mount the relay within 30° of a vertical position, due to its position sensitivity.
Type: Form C
Contacts: SPDT.
Switched Load Rating: 2 Amp, 500 Volts Max, 100 VA Maximum
Carry Load Rating: 5 Amp
Contact Resistance: 14 Milliohms Typical, 20 Milliohms Max.
Packaging: Under High Pressure in Glass Capsules.
Approximate Dimensions 5.8mm D x 38mm Long. (0.225" X 1.5")
Life Expectancy: 1 billion operations minimum at rated load.
Note: Mercury Hg-Wetted.
Danger - High Pressure Glass Capsule- Handle with Care - User assumes responsibility and competency to handle this item.
Learn More - DUNCO - MRR1ADSR8 - 5VDC SPST-NO 8DIP Dry Reed RelaysSpecial Price $3.71 Regular Price $4.95IN STOCK - MORE THAN 100 READY TO SHIP!5VDC SPST-NO 10VA-load New 8-pin EPOXY MOLDED DRY REED 500-OHM Operates from DTL, TTL or HNIL Learn More
- Electronic Applications Company - EAC - 1A06X125A1AB - Relay, reed. Coil: 6VDC 125 Ohm.IN STOCK - MORE THAN 100 READY TO SHIP!
Electronic Applications Company - EAC - 1A06X125A1AB Relay, Reed.
A reed relay uses an electromagnet to control one or more reed switches. The contacts are of magnetic material and the electromagnet acts directly on them without requiring an armature to move them.
Coil: SPST NO 1.25Amp 6VDC 125 Ohm.
Shielded.
Vintage New Old Stock
Alternate P/N: R-RR15 RD0241.
Allen Bradley purchased the former "EAC" Electronic Applications Company
Learn More - DATRON - LM21-001 - Reed Relay. Low Profile PCB Mount.
DATRON - LM21-001 - Reed Relay. Manufactured with an attached (1) 1N4148 diode.
Contacts: SPNO, Normally Open
Coil Voltage: 5 VDC (Actuates at Approximately 3.5V
Coil Resistance: 300 Ohms
Mount: PCB Through Hole
Overal Dimensions: 22.9mm Long x 7.3mm Square
Two (2) Leads Each End with 25.4mm (1.00") Spacing.
Double Marked: 30-7-2160-280.
Package: PCB Mount Low Profile.
New Old Stock
- Babcock - PC-2CS-24 - 1945345 - 2.7k, DPDT, Reed RelayIN STOCK - MORE THAN 100 READY TO SHIP!
Babcock - PC-2CS-24 - 1945345 - 2.7k, DPDT, Reed Relay
Status: Discontinued
48V, 2.7K Ohm
Dimensions: 22.7x27.9x14.4 mm
DPDT Reed Relay Black Epoxy.
Learn More - DATRON - 93GB61-4-BA-5.5K - Relay, Double Pole, Electrically Held, DPDT, 110 VDC Coil, Contacts 10Amps, 24 VDCSpecial Price $78.98 Regular Price $160.00
DATRON - 93GB61-4-BA-5.5K - High Performance Relay
Military - Aerospace Relay
Hermetically Sealed
High Shock and Vibration Rating
Shock Resistance: 100 G's, 6+/-1mS
Coil: 110 VDC, 5500 Ohms
Contacts: 10 Amps, 28VDC
Contact Material: Silver Cadmium Oxide
Operating Temperature: -65 C to 125 C
Mechanical Life Expectancy: 1,000,000 Cycles
Connections: Solder Terminals
Overall Dimensions: Height 1.25" X Length 1.765" X Width 0.530"
Bailey Control P/N 1946286A6
New Old Stock
.
Learn More - WABASH - 1155A-203-49 - Relay, Dip. Input: DC. Contacts: SPST NC.
WABASH - 1155A-203-49 - Rewd Relay, Dip.
Input: DC.
Contacts: SPST Normally Closed (NC).
Coil Voltage: 5VDC K1.
Coil Resistance: 300 Ohm
Mech Mtg: PCB.
Packaging: 4 Pin.
Overal Dimensions: 27.3mm Long x 10.78mm x 8.3mm
Two (2) Leads Each End with 25.4mm (1.00") Spacing.
New Old Stock
Alternate: CCI 300-812
- WABASH - 1371-4-1 - Relay, Reed. DC 4PST NO.
WABASH - 1371-4-1 -Relay, Reed.
Input: DC.
Contacts: 4PST NO.
Coil Voltage: 6VDC.
Coil Resistance: 315 Ohm.
Mech Mtg: PCB 10 Pin ( 6 x 4 ).
Size: 1.075" long x 0.617" wide x 0.337" above board.
Learn More - TRIRIDGE - 103-400-12M - HI CURRENT REED RELAY, 12VDC 4PST
TRIRIDGE - 103-400-12M - HI Current Reed Relay, 4PST
Voltage: 12VDC
Coil Resistance: 225 ohm
Current: 60mA
SHIELDED HI CURRENT REED RELAY
Dimensions: 0.06 x 0.04"
Connection: Gold Plated Right Angle Leads
Vintage Genuine Triridge New Old Stock
Learn More - TRIRIDGE - 103-100-12 - 41A261432 - Relay, Reed. Coil: 12VDC 1000 Ohm Coil.IN STOCK - MORE THAN 500 READY TO SHIP!
TRIRIDGE - 103-100-12 - 41A261432 - Relay, Reed.
Reed relays can switch faster than larger relays and require very little power from the control circuit.
High Density Miniature Single-in-line
SPST-1Amp (or more)
12VDC Reed Relay
1K ohm coil
Axial Lead,
One on one end and 3 leads opposite end
44.9mm x 12.6 mm round.
Proudly Made in USA
- Littelfuse Hamlin - HE722A05-10 - Relay, Reed. SPST-NO 5V 250mA.IN STOCK - MORE THAN 100 READY TO SHIP!
Littelfuse Hamlin - HE722A05-10 - Relay, Reed.
SPST-NO 5V 250mA.
Coil Current: 25 mA
Coil Resistance: 200 Ω
Coil Type: Non-Latching
Coil Voltage (AC): 3.75 V
Coil Voltage (DC): 5 V
Contact Current Rating: 500 mA
Dropout Voltage: 500 mV
Insulation Resistance: 10 GΩ
Max Current Rating: 500 mA
Max Operating Temperature: 85 °C
Max Voltage Rating (DC): 200 V
Min Operating Temperature: -40 °C
Operate Time: 1 ms
Relay Type: Reed
Release Time: 1 ms
Switching Current: 500 mA
Switching Voltage: 200 V
Package: 8 Dip in an IC Molded Type Body.
Low Profile.
Alternate /Similar: Coto 8002-05
Note: Hamlin is now a Littelfuse Company.
Learn More - ELECTROL - BBV1A12A10 - Relay, reed. Input: DC. Contacts: SPST NO.$1.50 As low as $0.75IN STOCK - MORE THAN 1,000 READY TO SHIP!
ELECTROL - BBV1A12A10 Relay, reed.
A reed relay is a type of relay that uses an electromagnet to control one or more reed switches. The contacts are of magnetic material and the electromagnet acts directly on them without requiring an armature to move them.
Input: DC.
Contacts: SPST NO.
Contact Ratings: 500mA, 10 watt.
Coil Voltage: 12VDC.
Coil Resistance: 1120 Ohm.
Mech Mtg: PCB 4 pin inline.
Packaging: Epoxy enclosed.
Size: 29.3mm x 9.6mm x 11mm above board.
Note: (600Vbr) 1Amp. Blueboy.
Learn More - American Zettler - AZ2531-045-1 - 48-82VDC DPDT-1Amp Reed RelayIN STOCK - MORE THAN 100 READY TO SHIP!
American Zettler - AZ2531-045-1 Miniature Relay
Status: Discontinued
48 VDC, 5.25 KOhm, 1ADC
Dimensions: 22.7x27.9x14.4 mm
Operating Voltage 48-82VDC
DPDT Reed Relay Black Epoxy.
New Old Stock
Learn More - TE Connectivity Potter & Brumfield AMF - JR-1050 - Dry Reed Relay. 24VDC SPDT-0.01Amp.
TE Connectivity Potter & Brumfield AMF - JR-1050 Dry Reed Relays.
Fast response, reliable performance, and long life make Potter & Brumfield JR standard dry reed relays are especially suited for applications where fast operating time and low power are required. Their high sensitivity and comparatively small size recommend them for data processing applications, computer equipment, logic circuitry, for voltage or current sensing and various other types of sophisticated control circuits.
Status: Discontinued
Relay Type: Form 1C
Coil Resistance: 2400 Ohms
Coil Turns: 17,400
Nominal Coil Voltage: 24VDC
Coil Current: 10 mA
Cell Power @Nominal Voltage: .240
Contact Arrangement: Dry Reed Form
Contact VA Rating: 10
Relay Inductance Henries @ 1000 Cycles: 3.950
10VA Contact Normally Closed.
Dimensions: 2-13/16" wide x 19/32" high.
Proudly Made in USA
- TE Connectivity Potter & Brumfield AMF - JRM-1036 - Miniature Dry Reed Relay 6VDC COIL 10VA Contacts SPST N.C.READY TO SHIP - ONLY 69 LEFT IN STOCK!
TE Connectivity Potter & Brumfield AMF - JRM1036 Miniature Dry Reed Relays.
Fast response, reliable performance, and long life make Potter & Brumfield JRM Miniature dry reed relays are especially suited for applications where fast operating time and low power are required. Their high sensitivity and comparatively small size recommend them for data processing applications, computer equipment, logic circuitry, for voltage or current sensing and various other types of sophisticated control circuits.
Status: Discontined
Relay Type: SPST
Coil Resistance: 130 Ohms
Coil Turns: 2,220
Nominal Coil Voltage: 6VDC
Coil Current: 46 mA
Cell Power @Nominal Voltage: 275
Contact Arrangement: Dry Reed Form 1B
Contact VA Rating: 10
Relay Inductance Henries @ 1000 Cycles: 0.023
10VA Contact Normally Closed.
Proudly Made in USA
Learn More - HATHAWAY - J-1A-12-P - Relay, Reed. Input: DC. Contacts: SPST NO.READY TO SHIP - ONLY 1 LEFT IN STOCK!
HATHAWAY - J-1A-12-P - Relay, Reed.
Input: DC.
Contacts: SPST NO.
Contact Ratings: 500mA.
Coil Voltage: 12VDC.
Coil Resistance: 1200 Ohm.
Mech Mtg: PCB wire leads.
Size: 1.121" long x 0.412" x 0.412".
Learn More - Littelfuse HAMLIN - HE421A8856 - 12VDC SPST-0.5A NO Dry Reed PCB Shielded
Littelfuse HAMLIN - HE421A8856 - 12VDC SPST-0.5A
NO Shielded Dry Reed Relays 175V DC Switching
PCB mt 4-pin,
Coil: 830-ohm
Dimensions: 29.7mm wide x 12.3mm deep x 8.8mm above board.
Double Marked 80D84157B01
Manuf in Mexico
Learn More - HAMLIN - HE721B6143 - Relay, Reed. SPST NC.
HAMLIN - HE721B6143 - Relay, Reed.
Input: SPST NC.
Coil Voltage: 24VDC.
Coil Resistance: 2150 Ohm with diode.
Connections: 8 Dip.
Mech Mtg: PCB.
Hamlin is now a Littelfuse company.
Learn More - General Electric - CR120PR120A22AA - 120VAC Reed RelaySpecial Price $28.98 Regular Price $64.50
General Electric - CR120PR120A22AA
120VAC Reed Relay
1 NO-1 NC Contacts
Stud Mount
Neon Indicator Light
Proudly Made in USA
Removed From Equipment/Used
Learn More - WABASH - 1389-1-1 J5 - HYBRID (REED RELAY) 120VAC-10A, 5VDC INSpecial Price $8.98 Regular Price $11.95
- TE Connectivity Potter & Brumfield - JWD-171-17 - Reed Relay, SPST, 20VDC, 50mW, 8-DIPSpecial Price $7.98 Regular Price $12.00
TE Connectivity Potter & Brumfield - JWD-171-17 - Reed Relay, SPST, 20VDC, 50mW, 8-DIP
Contact Plating: Ruthenium
Mount: PCB, Through Hole 14 Pin DIP form
Number of Terminals 8
Weight 2.299146 g
Coil Current: 10 mA
Coil Power: 100 mW
Coil Resistance: 500 Ω
Coil Type: Non-Latching
Coil Voltage (AC): 6 V
Coil Voltage (DC): 5 V
Contact Current Rating: 500 mA
Contact Resistance: 200 mΩ
Contact Voltage Rating (DC): 20 V
Current Rating: 500 mA
Insulation Resistance: 10 GΩ
Operating Temperature: -35 °C to 85 °C
Operate Time: 1.5 ms
Power Consumption: 288 mW
Release Time: 500 µs
Switching Current: 500 mA
Switching Voltage: 28 V
Throw Configuration: SPST
Voltage Rating (DC): 100 V
Dimensions: Height 8 mm, Length 19.56 mm, Width 7.62 mm
Alternate: 1-1393771-1
Learn More