Potentiometers & Trimpots

Beckman - BI Technologies - 7216-R2K-L.25 - Potentiometer.

Resistance: 2K Ohm.

Power: 2 Watt at 70 Degree C, Derating to 0 at 125 Degree C.

10 Turn Helipot.

Standard Tolerance: 3%.

Practical Tolerance: 1%.

Mount: Panel, Bushing 0.809" (20.5mm) Long.

Shaft is 1/4" (0.25") slotted for screwdriver adjustable or knob.

Hardware Included.

Note: Wirewound, Sleeve Bearing, Shaft Lock, Linearity 0.05%.

Dimensions: 7/8" (22.6mm) D x 1.459" (37.0mm) high.

Note: Precision. New.

Alternate: Newark 15M7810, Digi-Key 7216R2KL.25-ND

Learn More

BOURNS - 3065P-1-202 Resistor, Trimming.

Resistance: 2K Ohm.

Power: 3/4 watt.

Multi-turn, cermet.

Side-adjustable.

Mount: PCB.

Dimensions: (1") 25.7mm long x 7.3mm wide x 9.1mm above board.

Contacts: 3 PC leads.

Bourns alternate model 3006W.

Learn More

Resistor, trimming. Resistance: 2K Ohm. Power:0.75 watt. Tolerance: 10%. Cermet. Mount: 3/4" rectangular PCB, 3 pin. Side adjustable. More info: http://www.bitechnologies.com/pdfs/89.pdf Learn More

ALLEN BRADLEY - AB - 70A1G046R202R – Rotary Potentiometer. Logarithmic, 2K Ohm 3/4W, MOD Pot. The MOD POT® concept consists of standardized potentiometer modules that can be mixed and matched in over a billion combinations. Now, you can be far more imaginative with potentiometers because you can get special combinations with the ease of standards. Allen-Bradley originated the modular potentiometer concept in response to requests from design engineers who wanted virtually unlimited variety in variable resistors for greatly increased design freedom. Status: Discontinued Resistance: 2K Ohm. Type: Singer Hot Molded Temperature: -55 C to 120 C Environment: Dust and Splash resistant. (Not immersion sealed). Power: Approximately 3/4 watt. Mount: Panel Mount Dimensions: 0.627" Square x 0.6" High Shaft: 1/8" Diameter x 1/2" High Shaft and 1/4" High x 1/4" Diameter Threaded Bushing. Pot can be disassembled by four screws in case. Contacts: Solder Lugs. Additional Information: https://www.potentiometers.com/pdf/catalog70.pdf New Old Stock Learn More

Potentiometer. Resistance: 2.5K Ohm. Power: 2 watt. Hot molded carbon element. Mount: panel. Dimensions: 1.101" D x 0.510" high. 1/4" D locking shaft. Threaded bushing: 0.510" long. Screwdriver adjustable. Note: Alt P/N: RV4LAYSA252A, KLU2521, Type K. Learn More

Potentiometer. Resistance: 2.5K Ohm. Power: 2 watt. Tolerance: 10%. Dimension: 1.096" (27.8mm) D x 0.550" (13.9mm) high. Note: Locking bushing. Slotted short shaft, 5/8" (overall bushing and shaft). Screwdriver adjustable. Solder terminals. Linear. Note: Double marked CLU2521. Learn More

Potentiometer. Resistance: 2.5K Ohm. Power: 2 watt. Tolerance: 10%. Technology: molded composition. Dimension: 1.16" (29.4mm) D x 0.625" (15.9mm) behind panel. Long shaft 0.375-32 thread, round 1/4" (6.35mm) D x 2" (50.8mm) bushing and shaft. Note: Mount: Panel. Rotation 312 Degree, +/-3%, 500V. Linear. Type AB. New. Cross RV4NAYSJ type. Connections: solder. Note: Please refer to specification sheet for full complete technical specifications. http://www.datasheetarchive.com/dl/Datasheet-026/DSA00451657.pdf Learn More

ALLEN BRADLEY - AB - 16001 Potentiometer, Linear, Type J.

These potentiometers have an exceedingly low noise factor making them excellent for audio applications. Allen Bradley of Wisconsin, USA manufactured the best and highest quality potentiometer in the world. This is a hot-molded carbon potentiometer that is Allen sealed to prevent debris interference.

Status: Discontinued

Resistance: 2.5K Ohm.

Tolerance: 10%

Power: 2 Watt.

Voltage: 500 VDC across terminals

Type J, multi-turn, carbon element.

Mount: Panel, Bushing.

Package: Stainless Steel Shaft and Housing.

Dimensions: 28 mm D x 14.3mm high.

Bushing Length: 6.4mm long. Shaft: 6.3mm (1/4") D x 9.5mm long.

Adjustment Type: Knob, purchashed separately.

Contacts: 3 Solder Terminals.

Life: 100,000 Cycles

Note: Marked 16001.

New Old Stock - Made in USA

Learn More

Centrlab 117527 -Ohm Potentiometer.

Resistance: 3K Ohm.

Power: Approximately 2 Watt.

Dimensions: 1.430" D x 0.550".

Threaded bushing length: 0.387".

Shaft: 1/4" D x 0.344" long with screw-driver adjust.

Contacts: Solder Terminals.

New Old Stock

Made in USA

Learn More

CLAROSTAT - 1675-419 3K-Ohm - Potentiometer, Linear.

Resistance: 3K Ohm.

Power: 2 watt with 270 Degree Rotation.

Mount: Panel.

Dimensions: 1.12" D x 0.6" High with Indexing Pin.

Threaded Bushing: 0.38" D x 0.367" long.

Shaft: Knurled 1/4" D x 0.35" long, Screwdriver Adjustable.

Contacts: Center Wiper, Solder lugs.

Genuine Clarostat - New Old Stock

Proudly Made in USA

Learn More

Potentiometer. Resistance: 3.5K Ohm. Power: 2 watt. Tolerance: 10%. Dimension: 1.096" (27.8mm) D x 0.550" (13.9mm) high. Note: Locking bushing. Slotted short shaft, 5/8" (overall bushing and shaft). Screwdriver adjustable. Solder terminals. Linear. Note: Double marked CLU3521. Learn More

Potentiometer. Resistance: 3.5K Ohm. Approximately 2 watt. May in fact be 4 watt? Dimensions: 1-1/2" D x 5/8" high. Screwdriver adjustable. Bushing" 3/8" D x 3/8" long. Shaft: 1/4" D x 1/4" long. Contacts: solder. Learn More

Techno - M39015/3-009WM Resistor, trimming.

Resistance: 5K Ohm.

Power: 0.75 watt.

Tolerance: 5%.

Top-adjustable.

Mount: PCB.

Note: Military NSN 5905-00-419-9621, M39015 type.

Double marked RTR24DW502M.

Learn More

Potentiometer, precision. Resistance: 5K Ohm. Power: 2 watt. Tolerance: 5%. Linear: 0.3%. Ten turn. Technology: wirewound. Dimensions: 1/2" (12.7mm), 3 turret connections. Learn More

ETI Systems - MW22-1T - MW22B1-5K Potentiometer.

Resistance: 5K Ohm.

Tolerance: 5%.

Linear: 0.25%.

Number of Turns: 1 Turn, 180 Degrees.

Power: 2 Watt.

Technology: Wirewound Element.

Mount: Bushing.

Insulation Resistance: 10000 Mego Ohms @ 500 VDC

Vibration: 10 HZ to 2,000HZ  15G

Shock: 50G 11 mS

Dimensions: 22.4mm D x 19.1mm high.

Threaded bushing: 3/8" D x 8.3mm Long.

Shaft: 1/4" Screwdriver Adjustable x 11.8mm long.

Housing: Thermoplastic.

Contacts: Gold Solder Terminals.

Note: Precision.

Learn More

ETI Systems - MW22-10-5K Potentiometer.

Resistance: 5K Ohm.

Tolerance: 5%.

Linear: 0.25%.

Number of Turns: 10 Turn, 3600 Degrees.

Power: 2 Watt.

Technology: Wirewound Element.

Mount: Bushing.

Insulation Resistance: 10000 Mego Ohms @ 500 VDC

Vibration: 10 HZ to 2,000HZ  15G

Shock: 50G 11 mS

Dimensions: 22.4mm D x 19.1mm high.

Threaded bushing: 3/8" D x 8.3mm Long.

Shaft: 1/4" Screwdriver Adjustable x 11.8mm long.

Housing: Thermoplastic.

Contacts: Gold Solder Terminals.

Note: Precision.

Learn More

BOURNS - 3852Z-B44-502A - Potentiometer, Linear.

Resistance: 5K Ohm.

Power: 2 watt.

Tolerance: 10%.

Single turn.

Type: Cermet.

Mount: Panel.

Dimensions: 3/4" D round x 6.4mm high.

Threaded bushing: 3/8" D x 9.0mm long.

Shaft: Slotted 1/4" D x 2.5mm long.

Contacts: Solder.

More info: http://www.bourns.com/data/global/pdfs/385126.pdf#search=%223856a%22

Learn More

BOURNS - 3006P1-502 Resistor, trimming. 5K Ohm.

Power: 0.75 Watt.

Tolerance: 10%.

Temp coef: 100ppmDegC.

Technology: cermet.

Package: 3/4" rectangular panel mount.

Multi-turn, side adjustable.

More info: https://www.bourns.com/docs/Product-Datasheets/3006.pdf

Learn More

BOURNS - 3006W-001-502 Resistor, trimming.

Resistance: 5K Ohm.

Power: 0.75 watt.

Tolerance: 10%.

Multi-turn, cermet.

Side adjustable.

Mount: PCB, 3/4" rectangular.

Learn More

BOURNS - 3009P-1-502 - Resistor, trimming.

Resistance: 5K Ohm.

Power: 3/4 watt.

Tolerance: 10%.

15 turn.

Cermet, side adjustable, 3/4".

Mount: 3 pin PCB.

More info: http://www.bourns.com/pdfs/3009.pdf

Note: ALT P/N: 3009P-001-502. 

Learn More

Resistor, trimming. Resistance: 5K Ohm. Power: 3/4 watt. Multi-turn, cermet. Side-adjustable. Mount: PCB. Dimensions: 31.7mm long x 4.8mm wide x 7.9mm above board. Contacts: 3 PC leads. Learn More

Allen Bradley potentiometer - 5k Ohm.

Power: 2 Watts @ 70 Degree C derated to 0 Watts @ 120 Degree C.

Tolerance: 10%. Maximum Voltage: 500V. Technology: carbon element.

Package: Stainless steel shaft and housing. Single turn.

Operating Temperature Range: -65 Degree C to +125 Degree C.

Adjustment type: knob. Shaft: 1/4" D x 7/8" long, gold plated terminals.

Note: Maybe replaced with equal manufactured by PEC Canada RV4NAYSD502A, double marked KU5021S64.

Alternates: Honeywell 53C35K, NTE 501-0009

Learn More

CLAROSTAT - 5843K60001 - Precision Potentiometer, Linear. Clarastat 62JA SERIES

1K Ohm 2 Watt.

Tolerance: 5%.

Linear: 0.25% ABS.

Precision 10 Turn 1 Gang.

Technology: Wirewound.

Mount: Panel.

Rohs Compliant.

Genuine Clarostat - New Old Stock - Rare 

Proudly Made in USA

Learn More

NOBLE - 20SB10K - RV24YN - Potentiometer.

Resistance: 10K Ohm.

Power: approximately 2 Watt.

One turn.

Mount: Panel, bushing.

Dimensions: 31.1mm D x 16.5mm high.

Bushing length: 9.8mm long.

Shaft: slotted 1/4" D x 9.3mm long.

Contacts: 3 solder terminals.

Linear Taper.

Made in Japan

Learn More