Proximity Switch

Cutler-Hammer Opcon / Eaton - 9501AS-2005C1 - 108126-008 - 7872001300 - Photoelectric Sensor Control

Photoelectric sensors use light to detect the presence or absence of an object. The main advantages of photoelectric sensors are noncontact sensing of objects and greatly extended sensing ranges.

AGV Sensors – The eyes and ears of mobile robots

Proximity Sensor (Near T0 20-Inches)

WIDE-BEAM 20-32VDC

Open Collector NPN 

Input Voltage: 20-32 VDC

Response Time: 30 mS

Current Sinking

W/ 30" CABLE & 4-Pin MS3106F14S-10S Conn (Removeable)

Detects Light & Dark objects easily

By-OPCON Full Spex with Each Sensor

NEW IN A WHITE NEMA 1 - 4 ENCLOSURE

Overall Dimensions: 4.625" Long, 2.00" Wide, 2.75" Depth

Cable Length: 30"

Operating Temperature: -40 to 140F (-40 C to 60C)

Nema: 1,4

EATON and CUTLER-HAMMER

UPC 1072113905448, 72-1139-0646

Made in USA

New Old Stock in Manufacturer's Packaging

TURCK - Bi15-CP40-AN6X2 - Inductive Switch, Proximity.

10-30VDC 200mA 15mm.

3-Wire DC NPN

Ident Nr.: 16220

NIB.

Note: "Combiprox.

NAMCO CONTROLS DANAHER - EE520-65510 - Proximity Switch.

Dual Sensing - Industive Proximity

115VAC 0.005Amp - 5Amp, Continuous 2Amp Inrush

4 Conductor Power Cord SCP.

Short Circuit Protection

New Old Stock

Made in USA

Promiximity switch 115VAC 50/60HZ 0.5A Cyl Probe 1.295" metal.

NAMCO CONTROLS - EE520-41520 - Switch, Proximity Cylindicator.

Namco is a leader in electro-mechanical and non-contact switching devices for industry, aerospace, defense, marine and nuclear power applications. The product line includes arguably the world's most rugged limit switches for the toughest of environments. For over 25 years, the Cylindicator sensor has been the standard for industrial applications that require end‑of‑stroke indication on Hydraulic and Pneumatic Cylinders.

115VAC 0.5Amp, 1.295" Metal Probe.

Supply Voltage: 95-135.

End Sensing

Cylindicator.

PSI: 300.

Alternate: DANAHER CONTROLS EE520-41520

New Old Stock

UL Listed

Note: Namco, Snap-Lock, Mill-Pack, Hard-Coat, or Dura-Prox, all of which are trade names of NAMCO - a division of Specialty Product Technologies.

Proudly Made in the USA.

NAMCO CONTROLS - EE230-30421 Rotatable Cylindicator Proximity Switch.

Weld Field and Electrical Noise Immunity

3000 PSI Pressure Rating

Standard Latching Short Circuit Protection

Predictable, Consistent Electrical Performance

100% Tested and Burned-in

Purpose-Designed Housings and Materials

Internally Short Circuit Protected

1.0" Plastic Probe

20-140VAC/VDC 0.5A Continuous . - 3Amp inrush.

1.7mA Leakage Current Off State

8 foot 2 Conductor 18AWG SJO Power Cord.

Ready & SCP LED Indicators 

Replacement for EE220-30421.

New Old Stock

Note: Snap-Lock, Mill-Pack, Hard-Coat, and Dura-Prox are all trade names of NAMCO - Specialty Product Technologies. 

Proudly Made in USA

NAMCO CONTROLS - EP150-54200 - Amplifier Control Modules

12-24vdc or 20 vac Enclosed Amplifier Control Modules.

NPN transistor output 100mA max.

Includes 16 pin socket with solder leads

Factory New

TURCK - CKR12-10-5M CORDSET MULTI-FAST

Connector A: M12

Number of conductors: 5

Number of Pins A: 5

Connector A – Style: Straight, Male

Material coupling/housing A: Brass/Nickel

Application: Fieldbus Hazardous location

Fieldbus Protocol: DeviceNet™

Rated voltage: 250 V

Current: 4 A

Cable Jacket Material: PVC

Cable Jacket Color: Gray

M23 5-METER

Made in USA

NAMCO CONTROLS - EE520-30422 - Switch, Proximity, Cylindicator Series.

Hydraulic Cylinder

Plastic Probe

115VAC 50/60Hz 0.5Amp.

Pressure: 3000 PSI

18mm Mounting Kit

New

Proudly Made in USA

ELECTRO - 724868 - 9-196 - Magnetic Sensor, Tubular

With 2-Conductor Cable

New Old Stock 

SKAN-A-MATIC - S28002 - Photoelectric, Sensor / Wafer PhotoDetector Sensor. New

The S28 series skanner is a specially constructed LED Sensor designed to detect wafers for the semiconductor industry. polished and unpolished wafers can be detected from the same sensing point.

Operating Voltage: 30 VDC Max.

Spectra Response: 910 nm peak, filtered to respond to less than 5% at 750 nm and less than 0.1% at 700nm.

4 Conductor, 26 GA, Teflon Covered Cable with shielded photodetector leads and overall shield.

LED Skanner

Operating Distance 0.050".

Bottom Mounted Cable.

Note: LED must be current limited, 40mA max which will result in a forward voltage drop of 1.0-1.6VDC.

New Old Stock in Manufacturer's Packaging

Namco Controls - EE510-53400 - Switch, Proximity.

10-30VDC 100mA.

With LED "Power-On" Indicator.

Max sensing range: 1/2".

Recom sensing range: 1/4".

1/2 - 14 NPSC connection

New.

Prroudly Made in USA

General Electric - CR215DBX03 Threaded Barrel Proximity Switch Accessory

30mm Mounting

General Electric - CR215DBX02 - Threaded Barrel Proximity Switch Accessory

18mm Mounting Bracket

Made in USA

Eaton - Cutler-Hammer - E57-18LU08-D  Switch, Proximity.

Premium Series -Inductive

Output: Normally Open

Sensing Range: 8mm.

Supply: 10-50VDC 200mA.

Max. Load Current: 0.25 Amps

Body Composition: Metallic

Status Indication: LED

Connection: 2-meter 2-conductor unshieded cable.

Body: 18mm diameter, threaded with two nuts.

Non Embedable.

Short Circuit Protected / Reverse Polarity Protection

With Wiring Diagram.

UPC 782113922478

UL, CE Approved.

TURCK - Bi20-G47-AZ3X-B2131 Proximity sensor. Inductive.

Sensing distance 20mm.

Switches 20-250VAC 3-400mA.

Switches 10-300VDC 3-300mA.

Flush 47mm 2Wire.

Housing Material: Brass

Mount: Flush

Operating Temperature:  -25 °C to 70 °C

Operating Supply Voltage:250 V

Switching Frequency: 20 Hz

Termination: Connector

Dimensions: Length 76 mm

Compliance Ratings: IP67

RoHS Compliant

With attached connector.

RED LION CONTROLS - PSAC0000 - Sensor, Proximity.

The Red Lion PSAC0000 is a 3 wire inductive proximity sensor with an operating voltage of 10-30V DC, NPN O.C. output, and a 1.5 mm sensing distance. It has a 304 stainless steel body with a 10 foot shielded cable. Inductive sensors are used with metal targets, as opposed to plastic targets. Works with most Red Lion monitors, counters, and controls.

Features

• Can sense iron metal or non-iron metal to 'zero speed'
• Has 0 to 5 KHz pulse output rate
• Case is epoxy coated to withstand dirt and moisture
• Can be used on targets as small as 12 DP gear teeth
• Perfect for tachometer, counter, and control input

Specifications

• Case Dimensions- 3.5" Length x 0.75" Diameter
• Sensor Diameter- 0.25"
• Overall Dimensions- 4.5" Length x 0.9" Diameter
• Operating Temperature- -25 C to 70 C (-4 F to 158 F)
• Supply Voltage- 10-30V DC @ 20 mA (not reverse polarity protected)
• Max. Switching Frequency- 5 KHz
• Output- NPN Open Collector Transistor, VOH = 30 VDC max.; VOL = 1 V max @ 150 mA.
• Max. Sensing Distance- 1.5 mm (0.059")
• Cable Type- PUR Jacketed 3 wire 24 AWG (Brown - +VDC, Blue - Common, Black - NPN O.C. Output)
• Cable Length- 10 Feet

Used / Removed from New Equipment

Pepperl & Fuchs - UB500-30GM-E0-V15 - Sensor, Ultrasonic. Switch output: NPN NO/NC.

Housing Material: Brass

Number of Pins: 5

Frequency: 380 kHz

Operating Temperature: 1-25C to 70 °C

Max Supply Voltage (DC): 30 V, Min Supply Voltage (DC):20 V

Response Time: 480ms

Switching Current: 200 mA

Termination: Connector

Dimensions: Diameter 30 mm, Length 94 mm, Thread Size M30

Ratings: IP65

RoHS Compliant

New in Manufacturers Packaging

OMRON - E2E-X1B2 2M - Mini Proximity Sensor Inductive NO NPN 1mm 10V to 30V 3-Pin

Sensing Distance: 1 mm  IP67 Rating 

Mounting Style:   Panel  Mini - 2MM Diameter

Operating Supply Voltage: 30 V  Current 100mA

Output Configuration: NPN

Operating Temperature: -20 to + 70 C

Dimensions: Height 8 mm, Length 25 mm, Width 8 mm

Sensing distance: 0 to 1mm.

Sensing face: 2mm 

Body Material: brass, Body Plating Nickel 

Unit Weight:58.752 g

Threaded, 3 Wire.

Alternate/Replacment/Substitution: E2E-C04S12-WC-B2 2M

OMRON - E2E-X1C1 2M - Mini Proximity Sensor Inductive NO NPN 1mm 10V to 30V 3-Pin

Sensing Distance: 1 mm  IP67 Rating 

Mounting Style:   Panel  Mini - 2MM Diameter

Operating Supply Voltage: 30 V  Current 100mA

Output Configuration: NPN

Operating Temperature: -20 to + 70 C

Dimensions: Height 8 mm, Length 25 mm, Width 8 mm

Sensing distance: 0 to 1mm.

Sensing face: 2mm 

Body Material: brass, Body Plating Nickel 

Unit Weight:58.752  g

Threaded, 3 Wire.

OE Packing with Omron Instruction Manual

Alternate/Replacment/Substitution: E2E-S05S12-WC-C1 2M

TURCK - BI5-G18-AN6X 50MM

10-30VDC 200mA

Sn: 5mm = 0.197"

Housing Material: Brass

Mount: Flush

Operating Temperature: -25 °C to 70 °C

Operating Supply Voltage: 30 V

Sensing Method: Inductive

Shielding: Unshielded

Switching Frequency: 1 kHz

Termination: Cable

Dimensions: Length 50 mm

Compliance: Ratings IP67

RoHS Compliant

Made in USA

TURCK - Bi2-Q12-AP6X

Potted switch

40x26x12mm

10-30VDC

200mA

3-conductor cable PNP

TURCK - BI2-M12-AN6X-H1141 Sensor, proximity.  NO HARDWARE

Sensing distance: 2mm.

10-30VDC 200mA.

3 Wire DC NPN.

Housing Material: Brass

Mount: Flush

Max Operating Temperature: -25 °C to 70 °C

Operating Supply Voltage: 30 V

Termination: Connector

Dimensions: Length 52 mm

Compliance: Ratings IP67

RoHS Compliant

Micro-connector 4 Pin male.

Note: ALT P/N 460660000.

OMRON - E2E-X1C1 5M - Proximity Sensor Inductive NO NPN 1mm 10V to 30V 3-Pin

Sensing Distance: 1 mm  IP67 Rating 

Mounting Style:   Panel   5MM Diameter

Operating Supply Voltage: 30 V  Current 100mA

Output Configuration: NPN

Frequency Response: 3kHz 

Operating Temperature: -20 to + 70 C

Dimensions: Height 8 mm, Length 25 mm, Width 8 mm

Sensing distance: 1mm (0.039").

Sensing face: 5mm 

Body Material: brass, Body Plating Nickel 

Unit Weight: 6.172943 oz

Threaded, 3 Wire Case M5.

Alternate: E2E-S05S12-WC-C2 5M