Rotary Encoder

Electroswitch - OAK INDUSTRIES - LCE1N-2G09-36-3 Encoder, Rotary, 700 Series.

Electroswitch Electronic Products acquired OakGrigsby. 

Manual 2 Bit, 9-cycle, 36-Position with detents.

Gray code.

Housing material: Plastic, Gray.

Operating Temperature: -40C to 85C

Mount: Panel, Threaded-bushing.

Rotatiopn Life: 50,000 Cycles.

Max Operting Speed: 30 RPM

Dimensions: 0.890" (22.6mm) long x 0.830" (21.0 mm) wide plus 3 PC leads x 0.336" (8.5mm) high. Bushing length: (3/3-32), 6.3mm long. Shaft: 0.250" (6.35mm) D x 0.500" (12.7mm) long.

Note: Marked OAK 700. (0.830" x 0.343").700 encoder

Additional Information: https://www.electro-nc.com/oak/p0710.pdf

Electroswitch OAK-GRIGSBY INC. - 94Q100-40-00 - Rotary Encoder.

The 900 Series offers a full line of low cost, rugged optical encoders with incremental output. Well suited for industrial motion and position sensing, their low profile and high resolution also make them ideal for panel mounted applications. A two-channel quadrature code allows the encoder to detect the direction and magnitude of the input motion applied to its shaft.

Optical. 100PPR, 3,000RPM max.

Two Channel Quadrature Output.

Style 2 Output: NC + A B.

Mount: Panel, 1/2" bushing and 1/4" SS shaft, ball bearing type, spins freely.

Package: Die Cast Housing, 1" Square.

Standard 4" 4-pin Ribbon Cable and Connector.

Note: Compact, Robust, Economical. 100 million+ operations.

DISC INSTRUMENTS - Honeywell - PC62D-40-5 OPTICAL ENCODER

Made in USA

Used / As removed from Equipment

DYNAPAR / DANAHER - E1103601200 - Encoder, Rotary.

The Series E12 is a ultra-miniature incremental optical encoder packaged for commercial and lighter-duty industrial applications. Its small size is ideal for confined spaces with a resolution from 100 - 1024 PPR with an optional index.

Rugged Metal Housing - Sub-Compact 1.2” Diameter - Up to 1024 PPR with Optional Index

Incremental 360-PPR.

Input: TTL (+5VDC): 135mA max.

CMOS (+12 or +15VDC): 100mA max.

Rugged all Metal Housing.

Mount: Servo Face, 1/8" Stainless Steel Shaft. 5V STD.

Dimensions: 1.2" OD x 1.2" Body Length.

4 Wire plus Braid Shield.

Miniature Size 12.

Factory New Complete with Manufactures Wiring Instructions and Guidelines.

DYNAPAR / DANAHER - 3200100000 - Encoder, Rotary.

Dual shaft 7406 OC.

MFG CD: 867413. DAT CD: 0136.

Each shaft: 3/8" D.

Dimensions: 2.25" blue cube with 6-pin male MS connector.

New Old Stock

ACCU-CODER INCREMENTAL SHAFT ENCODER60 PULSES PER REVOLUTIONModel 721 - AC Powered Unidirectional EncoderDesigned for use where DC power is unavailable. It is essentially a 711 with a built-in 120 VAC power supply. MATING CONNECTOR INCLUDED

Made in USA - New Old Stock

BEI - Sensata - XH25D-SS-300-ABZC-4469-LED-EM18 - 924-01002-7459 - Optical Encoder, Incremental. Absolute.

The H25 ASeries Optical encoder is the flagship of the BEI Sensors product line. It was designed from the ground up for the industrial marketplace. The H25 offers features such as EMI shielding, 40 lb. ABEC 7 bearings, matched thermal coefficients on critical components, and custom high efficiency optics.

Sensing: Optical

Shaft type: Single ended - 3/8" sealed 416 Stainless Steel with flat

Termination: 10-pin MS connector rear exit.

Input Voltage: 5-15 VDC

Nema Rating: NEMA 4, NEMA13

IP Ratong: IP66

Bearing: Yes

Signal Direction: Bidirectional

Line driver, 100mA source/sink. 5-15VDC 90mA-Input.

Heavy duty, square flange encoder, 2.5" Diameter 

Note: BEI Sensors & Systems Co.

Weight: 1 lb.

Applications: Machine control, process control, the wood processing industry, oil well logging, industrial weighing,
agricultural machinery, textile equipment, web process control, robotics, and food processing.