Military Switch

Switch, toggle. Contacts: SPDT. Contact Ratings: 2Amp 115VAC 60Hz (Res load), 4Amp 28VDC (Res load), 1Amp 115VAC 60Hz (Inductive load), 1Amp 28VDC (Inductive load). Actuator: On-On. Connection: PC Leads, tarnished, cleanable. Mech: PCB. Note: Military double marked MS21354-231. Military NSN 5930-010433006. New, complete with hardware. Learn More

Cutler-Hammer / Eaton - 8448K2 Switch, pushbutton.

DPST NO Momentary 15Amp 125VAC/10Amp 250VAC.

Bushing diameter: 0.461".

Threaded bushing length: 0.344".

Actuator length: 0.219".

Mount: panel.

Dimensions: 1.329" long x 0.743" wide x 0.766" high plus contacts.

Termination: 4 screw terminals.

Complete with hardware.

Learn More

Vibtage Aircraft Eaton Cutler Hammer AN3023-3, 8710K14 Toggle Switch, Contacts: DPDT. Contact Ratings: 15Amp 115VAC. Actuator: On-On. Connection: Screw terminals. Mech: Panel, 2 hole flange, 2.114" (53.7mm) long x 1.261" (32.0mm) wide) with 1.8" (45mm) centers. Body: 36.7mm long x 37.2mm wide x 34mm deep behind panel. Note: Heavy duty, aircraft switch. Operation: maintained. Double marked:AN3023-3 and ST55N.

Learn More

SAFRAN EATON CUTLER-HAMMER - 8512K15 - Switch, toggle.

Contacts: 4PDT.

Contact Ratings: 15Amp 115VAC.

Actuator: On-On-On.

Connection: Flush terminal screws.

Mech: Panel, bushing 15/32".

Body: 41.8mm long x 33.5mm wide x 32.0mm deep behind panel.

Note: Environmentally sealed switch (watertight). 20,000 Operations at rated load.

Threaded bushing length: 12.1mm.

Actuator length:17.3mm.

Complete with hardware.

New Old Stock- Made in USA

Learn More

EATON CUTLER-HAMMER - 8442K2 Switch, pushbutton.

SPST NO, Round Plunger

6Amp 125VAC/3Amp 250VAC.

Threaded bushing length: 0.751".

Actuator length: 0.50".

Dimensions: 1.140" long x 0.633" wide x 0.605" high.

Contacts: 2, 1/4" male quick connect terminals.

Learn More

Switch, pushbutton. Contacts: SPST. Contact Ratings: 3/4A 125VAC/1/2Amp 250VAC. Actuator: momentary. Connection: screw or solder terminals. Mech: One 1/2" hole mount. Note: Threaded bushing length: 0.473". Black actuator. Learn More

Switch, push. 4PDT 115VAC/28VDC. Enclosed type. Both positions maintained single switch unit, enclosed. Mount: panel. Note: Illumination color: green. Vibration resistant. Contact: 15 solder tabs. Military NSN 5930-01-360-4000. Learn More

Cutler-Hammer / Eaton - 8652K1 Switch, lever.

DPST, Normally Open,

20A 125VAC/10A 250VAC, 1-1/2HP 250V, 1HP 250VAC.

Momentary, with Integral Retain-On pin, Overahanging tool, Metal Delrin Trigger/Actuator.

Dimensions: base 2.250" long x 1.009" wide x 0.751" high.

Overall with lever 3.5" wide x 2-1/16" high.

Terminals: 4 screw contact.

Complete with screws.

Made in USA

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15Amp 115VAC / 28VDC. Actuator: On-(Off). Connection: screw terminals. Mech: Panel. Panel hole: 1.310" long x 0.721" wide x 1.171"deep (overall) or 0.70" if mounted to panel front. Threaded bushing 0.473" long. Environmentally sealed actuator. Note: Military double marked MS25306-292. New, complete with hardware. Military NSN 5930-008221829. Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 18Amp 115VAC. Actuator: On-Off-(Mom). Connection: screw. Mech: panel. Panel hole: 1.332" long x 0.750" wide x 0.80" deep. Threaded bushing: 0.470" long (seated 0.643" long). Note: Double marked Military MS35059-31. Enviormentally sealed switch. Used/Removed from equipment. Learn More