Pushbutton Switch

RONG FENG CO LTD - SS-160 - Switch, Latching Pushbutton.

Power Amplifier Box Power Switch

DPST Push-On/Push-Off, Latching, 10Amp 250VAC.

Mount: Panel Mount with 2 holes 20mm apart. SDDF/3Type

Material: PBT

Contacts: (4) 1/4" Male Quick Connect Terminals or Solder. (Silver Plated - Tarnishing) 

Approvals: UL/CSA

Applications: Quality Electrical Power Switch, Amplifier Power Switch 

New Old Stock

Made in Taiwan

ITT Schadow  - 603812 - - PVAH2 - Switch, Pushbutton.

Compact Design & Short Stroke to latch. 

Electrical: Switching Power 3W, Switching voltage 32 VDC, Switching current 100mA

Contacts: DPST. Operating Force: 1.2N

Actuator: Push On/Push Off (Latching).

Connection: Through Hole, PCB terminals, or Solder.

Operating Temperature: -40 to 85C

Mech: PCB. Body: 9.2mm x 9.8mm square x 11mm high which includes the plastic body and the 5.4mm square x 2.3mm high plastic collar.

Includes extended Button: 10.6 mm High x 8.7mm Diameter red pushbutton.

There is a spacing of 3.3mm between top of collar and bottom of pushbutton.

Note: Keyboard switch, each with round red knobs.

Applications: Automotive, Industrial, Control Panel

Customer P/N: 438400000

Similar/Alternates: PVA1EE, CTI 43840

Removable Round Cap (Snap-on)

RoHS Compliant

Made in USA

Package of 4

PRONIC - PS30 SERIES - Switch, Pushbutton. Contacts: DPST.

Switch, Pushbutton.

Actuation: Push ON / Push OFF

Contacts: DPST. Four 1/4" Quick Connect Terminals.

Mount: Panel, 2 Screw  M3x0.5

Contact Ratings: 12Amp 125VAC, 6Amp 250VAC.

Actuator: Latching.

Switch Cap ID: 3.3mm Square

Insulation Resistance: 2,000VAC - 1 Minute

Life Expectancy: 10,000 Cycles

Dimensions: Body Length: 1.222" (31.00mm), Body Width: 0.866" (21.90mm), Body Height: 0.697" (17.7mm)

Screw Hole Spacing ~ center-to-center: 0.787" (20.00mm)

Approvals: UL, CSA

New Old Stock

Applications: Switching Power Supply, TV, Amlifier, Monitor, Audio Component 

Matsushita - S-3 TV-3 ESB-702T-671 -Switch, pushbutton, latching.

Contacts: DPST.

Ratings: 3A 250VAC.

Actuator: push-on, push-off.

Connection: solder terminals.

Mech: panel mount 2 threaded holes 0.80" spacing.

Note: Snap switch.

Use knob #4509, 8-431

Cutler-Hammer / Eaton - 8448K2 Switch, pushbutton.

DPST NO Momentary 15Amp 125VAC/10Amp 250VAC.

Bushing diameter: 0.461".

Threaded bushing length: 0.344".

Actuator length: 0.219".

Mount: panel.

Dimensions: 1.329" long x 0.743" wide x 0.766" high plus contacts.

Termination: 4 screw terminals.

Complete with hardware.

ITW - CTI 42493 Switch, push.

Contacts: DPST momentary.

Mech: PCB 4 pin.

Body: Overall 19.1mm above board.

Note: Sensitive keyboard, each with switch caps.

Eaton Cutler-Hammer - SWITCH100 - Switch, Pushbutton.

Contacts: DPST.

Contact Ratings: 15Amp 125VAC.

Actuator: Momentary, Non-Latching.

Mechanical: 4 Screw Terminal.

Made in USA

Cutler-Hammer / Eaton - 8652K1 Switch, lever.

DPST, Normally Open,

20A 125VAC/10A 250VAC, 1-1/2HP 250V, 1HP 250VAC.

Momentary, with Integral Retain-On pin, Overahanging tool, Metal Delrin Trigger/Actuator.

Dimensions: base 2.250" long x 1.009" wide x 0.751" high.

Overall with lever 3.5" wide x 2-1/16" high.

Terminals: 4 screw contact.

Complete with screws.

Made in USA