Pushbutton Switch

Genuine ITT Cannon / Schadow Switch, N30X1A Pushbutton.

Contacts: SPDT Push-On - Push-Oof.

Contact Ratings: 5 Amp 250 VAC.

Actuator: Latching.

Connection: Solder Terminals.

Mechanical Mount: Panel.

Body: Extends 1.83" behind panel x 0.58" wide, 0.94" with bracket.

Panel hole: Two threaded mounting holes on bottom, two more holes in front about 0.72" centers.

Note: Alternate Action. Knob included.

New Old Stock

Learn More

RONG FENG CO LTD - SS-160 - Switch, Latching Pushbutton.

Power Amplifier Box Power Switch

DPST Push-On/Push-Off, Latching, 10Amp 250VAC.

Mount: Panel Mount with 2 holes 20mm apart. SDDF/3Type

Material: PBT

Contacts: (4) 1/4" Male Quick Connect Terminals or Solder. (Silver Plated - Tarnishing) 

Approvals: UL/CSA

Applications: Quality Electrical Power Switch, Amplifier Power Switch 

New Old Stock

Made in Taiwan

 

Learn More

EAO SWITCH - 14-131.025/010 Switch, Pushbutton.

Status: End of Life - Will be discontinued by Manufacturer

Contacts: SPDT.

Contact Ratings: 5Amp 250VAC (300VAC).

Actuator: Illuminated, Red.

Momentary 1NO/1NC.

Mech: Panel mount for hole 0.795" Diameter (22.3mm) with 2 screws at 0.98" centers.

Body: overall 1.384" D x 1.061" in front of panel.

Note: Silver frame around red plunger.

Lamp 60V 1.2 watt.

IP Rating: IP67

Mechanical Life: 2,000,000 Cycles

Listed UL/CSA.

Swiss made.

More info: http://www.eao.com/eus/en/products/condensedcatalogue/byseries//series_14.pdf

Learn More

Matsushita - S-3 TV-3 ESB-702T-671 -Switch, pushbutton, latching.

Contacts: DPST.

Ratings: 3A 250VAC.

Actuator: push-on, push-off.

Connection: solder terminals.

Mech: panel mount 2 threaded holes 0.80" spacing.

Note: Snap switch.

Use knob #4509, 8-431

Learn More

Honeywell Industrial Premium Large Base Switch, BZ Series.

MICRO SWITCH™ Premium Large Basic Switches: BZ Series, Single Pole Double Throw (SPDT), Split Contact Construction Allowing Two Isolated Circuits, 5 A 250 Vac, 5 mm [0.20 in] Diameter Hardened Steel Additional Overtravel Plunger, Binding Head Combination Screw Termination with Integral Washer, Mounting Holes will Accept Pins or Screws, UL, CSA.

Status: Discontinued 

Contacts: SPDT with w/N.O. & N.C. Contacts. 

Split Contacts Allowing Two Isolated Circuits.

Rating: 5A 250VAC.

Contact Material - Silver.

Actuator: Pin Plunger with 0.03" (0.76mm) Pre-Travel and 0.06" (1.52 mm) Overtravel.

Connections: Five Screw Terminals.

Hardened Steel Plunger.

Mech: two 0.13" holes 1" spacing.

Body: 0.69" x 1.95"L x 1"H plus 0.55"H plunger. (49.28 X 17.45 X 44.45mm).

Operating Temp: -67F to +185F (-55 - 85C)

Through Hole Chassis Mounting.

Force to Operate  - 26 oz (7.22 N).

Construction - Phenolic. Split Contact Construction allowing Two Isolated Circuits.

Mechanical Life - 20,000 cycles.  

Weight 1.04 oz.

Alternate/Cross: Allied Signal 71145647, Mouser 785-BZ-3YST, BZ-3YST-ND, BZ3YST, 480-4707

RoHS Compliant, UL, CSA, ENEC

POTENTIAL APPLICATIONS: Building controls and equipment, Doors and lifts, Semi-trucks and trailers, Valves, Industrial timers, Communication systems, Foot switches, Commercial and industrial food service equipment, Agriculture irrigation equipment, Medical instrumentation

Proudly Made in USA

Learn More

Switch, push. Momentary SPDT 250VAC, illuminated 24VDC lamp, locking lever, snap action contact, green lens. Mount: 5/8" (16mm), solder terminals.More info: http://www.idec.com/language/english/catalog/Switches/A6Series.pdf Learn More