Roller Switch
- CHERRY ELECTRICAL PRODUCTS - D41LR1RA - Switch, Roller. Contacts: SPDT- 0.1A @ 125 VAC, Light Force
CHERRY ELECTRICAL PRODUCTS - D41LR1RA - Switch, Roller.
Status: Discontinued
Circuit: SPDT
Switch Function: On-Mom
Current Rating (Amps) 100mA (AC), 500mA (DC)
Voltage Rating – AC: 125 V
Voltage Rating – DC: 30 V
Actuator Type: Round (Pin Plunger)
Mounting Type: Chassis Mount
Termination Style: Quick Connect - 0.187" (4.7mm)
Features: Explosion Proof
Operating Force : 6gf Light Force
Operating Position: 0.560" (14.2mm)
Pretravel: 0.047" (1.2mm)
Differential Travel: 0.012" (0.3mm)
Overtravel: 0.051" (1.3mm)
Operating Temperature: -40°C ~ 85°C
Electrical Life: 6,000 Cycles
Contacts: SPDT.
Contact Plating: Gold
Actuator: Momentary. Very Light Force Required.
Connection: 3/16" Quick Connect or Solder Terminals.
Body: 38mm long x 28mm x 9.6mm.
Approvals: UL, CSA
Alternates: D419-R1AA-G2, V7-3E17D8, V15T22-CZ200
Learn More - Honeywell Microswitch - BZ2RQ18 - Switch, Snap Action, N.O./N.C. SPDT with Roller Plunger, 15A, 230 VAC.IN STOCK - MORE THAN 100 READY TO SHIP!
Honeywell Microswitch - BZ2RQ18 Switch, Premium Series Limit, Snap Action w/Roller Plunger.
Contacts: SPDT.
Contact Ratings: 15A 125/250/480VAC.
Actuator: High Travel Plunger with Roller.
Connection: Solder Terminals.
Contacts: Silver
Elect Config: Snap Acting.
Operating Temp.: -55 to 85C (-67 to 185F)
Mech: Threaded Bushing with Nuts, 0.46"D x 1"L.
Dimensions: MICRO SWITCH Standard 25,4 mm H x 17,8 mm W x 50,8 mm L (1.0 in H x 0.7 in W x 2.0 in L)
Weight: 0.2 lbs.
Life: Long Mechanical Life up to 20,000,000 cycles at 95% survival
Note: Operating force: 9 - 13 ounces.(2.5 N to 3.61N)
Roller Travel: 0.01" plus 0.2" Overtravel.
Applications: Irrigation systems, Semi-trailer trucks, Timing devices, Office equipment, Test instruments, Medical/dental equipment, HVAC equipment, Manually operated devices, Valves
Made in USA
Learn More - Cherry Electrical Products - E73-47KT - Switch, Micro w/Roller Arm. Normally Closed (NC), Watertight sealed and Weather Proof Miniature.IN STOCK - MORE THAN 500 READY TO SHIP!
Cherry Electrical Products - E73-47KT Switch, Micro w/Roller Arm.
Contact Ratings: 0.1Amp 125VAC, Gold Cross-Point (5V logic) Contacts.
Actuator: Normally Closed Snap-Action.
Long Life Coil Spring Mechanism
High Temperature Thermoplastic Button, cove and Base.
Temperature Rating -40 to +85C
Hydrin Contact Boot
Macromelt Polyamide Potting
Stainless Steel Actuator
Connection: 2 Wire Leads 9.5" long.
Mech: Mounting Holes on about 5/8" centers.
Note: Only requires about 1/3" of movement for actuation.
Life at Rated Load = Min. 6000 operations
IP67 Water-Resistant and Weatherproof.
Specifications
Electrical Temperature Rating: -40°to +85°C
Flammability Rating: UL94V-O Materials
Case: Hi-Temp Thermoplastic Nylon
Boot: Hydrin
Button: HiTemp Thermoplastic Nylon
Actuator: Stainless Steel
Potting: Macromelt Polyamide
Contacts: Gold Crosspoint (E73)
Characteristics inches (mm)
Max. Rest Position: 1.041 (26.44)
Max. Pre-travel: 0.240 (6.10)
Operating Point: 0.762 ± 0.125 (19.36± 3.18)
Min. Over-travel: 0.125 (3.18)
Max. Movement Differential: 0.025 (0.635)
Max. Operating Force : 75 gms.
Learn More - C & K Components - 3TMA-4A - TMCJ4A -Switch, Micro. with Roller. 15A 125V
C & K Components - 3TMA-4A Switch, Micro. with Roller.
SPDT NC/NC
15Amp 1/2HP 125, 250VAC/ 0.25Amp 250VDC/ 0.5Amp 125VDC/3Amp 125VAC.
Operating temperature: 67 Deg F to 302 deg F (55 Deg C to 150 Deg C).
Double marked: TMCJ4A.
Listed: UL/CSA.
Note: Cam Rotary.
New Old Stock
Learn More - LICON – 16-114 w/ Actuator 76-1290 - Roller Switch, Limit & Manual Reset, DPST, 10A, 125/250VAC.Special Price $5.98 Regular Price $12.95LICON – 16-114 w/ Actuator 76-1290 - Roller Switch, Limit & Manual Reset, DPST, 10A, 125/250VAC. ITW Licon Series 16 Snap Action Switch utilizes the Butterfly action for high integrity switching in a compact size. The series 16 Snap Action switch utilizes the Butterfly™ action for high integrity switching in a compact size. Using the Form Z switch circuitry, this switch can be used to control two circuits. Sub-Miniature 10A Double-Break Snap Action switch with Manual Reset. Switch mechanism utilizing a single spring element to provide lost motion. Status: Discontinued Contacts: DPST-DB. Contact Material: Silver Thermoplastic Case and Cover. Contact Ratings: 10A AC/DC, 125/250VAC. Actuator: 76-1290 Two Positions, Switch Roller Lever Maintained. Connections: Four End Solder Terminals. Mechanical: Riveted on Small Plate. Environment: IP40 Meets MIL-PRF-8805/7 Operating Design Life: Electrical – 100,000 Cycles, Mechanical 10,000,000 Cycles Body: 0.25" Width x 1.16" Length x <1.0"H. Temperature: -54C to 125 C (-65F to 275F) Note: Has an unusual mechanical reset once roller/lever is pushed and snaps. UL Recognized and CSA Certified. Applications: Industrial, Military, Aerospace Used / Removed from Equipment. Learn More
- Honeywell/Microswitch - BZ2RW826 - Roller Micro Switch SPDT-15A Snap Action Lever
Honeywell/Microswitch - BZ2RW826 -
Description: Switch Snap Action N.O./N.C. SPDT Roller Lever 15A 250VAC 1.67N Screw Mount Screw Automotive
Contact Material: Silver
Housing Material: Phenolic
Mechanical Life: 20 Mcycles
Mount: Chassis Mount, Screw
Weight: 3.401 kg
Contact Current Rating: 15 A
Differential Travel: 508 µm
Electrical Life: 100,000 Cycles
Operating Temperature: -55 °C to 85 °C
Number of Positions: 2
Operating Force : 167 N
Operating Position: 4.134 m
Orientation: Straight
Overtravel: 239 mm
Switch Function : On-Mom
Termination: Screw
Throw Configuration: SPDT
Voltage Rating AC/DC: 125 V
Dimensions: Depth 17.5 mm, Length 49.3 mm, Width 49.3 mm
Compliance: Approvals CE, CS
Moveable Roller Lever
Roller swings back down to 90-degrees - Unique
UL/CSA
Made in USA
NEW
Learn More - Cutler-Hammer / Eaton.... - E47BCC07S5 - Switch, Limit. Roller Plunger SPDT-5A$39.88Out of stock
Switch, Limit. SPDT-5A. Actuator: Roller Plunger. Connection: 5-meter 4-conductor cable. Mech: 2-hole 25mm spacing. Body: 40 x 67 x 16mm. Enclosure: NEMA 4, 6 and 13. IEC IP67. Weight: 1.5 lb. Pkg of 1. Note: Mechanical life: 10,000,000 operations. Series A1.
Learn More - CUTLER-HAMMER - SS12FT30-102L4 - Switch, micro. 1 NO, 1 NC.$7.50Out of stockSwitch, micro. With roller. Two (2) position, one NO, one NC, 10Amp 125/250VAC. Learn More
- EATON CUTLER-HAMMER - SS12EV10-102L4 - Switch, Micro with Roller. One Normally Open 15A 125/250VAC.Special Price $7.98 Regular Price $12.50Out of stock
EATON CUTLER-HAMMER - SS12EV10-102L4 - Switch, Micro with Roller.
High Quality Snap Switch
Contacts: Normally Open
Current: 15A
Voltage:125/250VAC.
Made in USA
Learn More - Telemecanique - XCKJ10541H7 - Switch Limit with Adjustable Roller 1NO 1NC, 10A, 240VSpecial Price $89.98 Regular Price $115.00READY TO SHIP - ONLY 1 LEFT IN STOCK!
Telemecanique - XCKJ10541H7 Switch, limit, with adjustable roller.
Contacts: 1 NO, 1 NC.
Lamp Voltage: AC15, 240VAC (250VDC) 3Amp (10Amp max).
Note: Roller head: ZCK-E05. Ui: 500V,
Operating Temperature: -25 C to 70 C
Uimp: 6kV. ENC type 4.
Listed: UL/CSA.
Learn More - Honeywell/Microswitch - V7-2B17D8-207 - Switch, Micro, Roller. SPDT 11Amp 125V.READY TO SHIP - ONLY 23 LEFT IN STOCK!
Honeywell/Microswitch - V7-2B17D8-207 Switch, Micro, Roller.
Honeywell’s MICRO SWITCH™ V7 miniature switches are designed for long term-reliability in a rugged switch packaged with a thermoplastic housing. These switches may be installed in a wide range of applications from simple or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies.
Contacts: SPDT.
Contact Ratings: 11Amp 125, 250, 277VAC 1/3HP (1/2Amp 125VDC, 1/4Amp 250VDC, L156 4Amp 125VAC).
Connection: (3) 0.187" Male QC Terminals.
Mech: Two Holes at 0.975".
Panel hole: 1.133" long x 0.396" wide x 0.623" high, plus terminals and roller/arm.
Basic Snap Action.
Maximum Operating Force: 0,44 N [21.6 oz].
Approvals: Certified with CSA, ENEC, and UL for global acceptability
Learn More - Honeywell/Microswitch - BZ-2RQ18 - Switch, Micro Roller Plunger. SPDT 15Amp 125VAC.
Honeywell/Microswitch - BZ-2RQ18 - Switch, Micro Roller Plunger.
Contacts: SPDT.
Contact Ratings: 15Amp 125, 250, 480VAC, 1/8HP 125VAC, 1/4HP 250VAC, 1/2Amp 125VDC, 1/4Amp 250VDC.
Contact Material: Silver
Housing Material: Phenolic
Material: ThermoPlastic
Mechanical Life: 20 Mcycles
Mount: Panel
Weight: 635 g
Current Rating: 15 A
Differential Travel: 50.8 µm
Operating Temperature: -55 °C to 85 °C
Max Voltage Rating (AC):250 V
Operating Force: 361 N
Operating Position: 1.143 mm
Overtravel: 356 mm
Pretravel: 38 mm
Switch Function : On-Mom
Termination: Solder (Up to 14 AWG)
Voltage Rating (AC):125 V, Voltage Rating (DC) 125 V
Dimensions: Depth 17.5 mm, Length 49.3 mm,
RoHS Compliant, UL CSA
Made in USA
Alternate: Newark 72K2371
New Old Stock
- Honeywell/Microswitch - 6PA1 - Microswitch, roller & spring only.Special Price $28.98 Regular Price $36.50
Honeywell/Microswitch - 6PA1 - Microswitch, Roller & Spring Only.
Actuator (Roller lever).
For limit switches.
Learn More - Honeywell/Microswitch - 1LS6 - Microswitch with Roller Arm.Special Price $189.98 Regular Price $268.95
Honeywell/Microswitch - 1LS6 - Microswitch with Roller Arm.
Enclosed Limit Switch, PT 20 degrees.
Rotary Lever Arm, Side
10 Amps
Contact Form 1NC/1NO
SPDT, Snap Action
Double Break
Voltage Rating 480VAC
NEMA Rating 1, 3, 4, 6, 13, 1/2 In.
NPT Wiring Entry
Electrical Connection Screw Terminals
IP Rating No IP Rating
Movement Rotary
Travel Maximum Pretravel 20 Degrees
Minimum Over Travel 30 Degrees
Differential Travel 12 Degrees
Series LS
Operating Temp. Range -20 Degrees to 160 Degrees F
Actuator Length 1.50 In., Roller Dia. 0.75 In.
10Amp 120, 240VAC or 480VAC, 1/3HP 120VAC, 3/4HP 240VAC, 0.8Amp 115VDC, 4Amp 230VDC, 0.1Amp 550VDC.
Pilot duty: 600VAC Max.
Factory New
Made in USA
Learn More - Honeywell/Microswitch - 1LS1 - Microswitch Precision Limits Switch with Roller Arm.Special Price $118.98 Regular Price $128.50
Honeywell/Microswitch - 1LS1 - Microswitch Precision Limits Switchwith Roller Arm.
The Honeywell MICRO SWITCH™ Compact LS Limit Switch Series offers products that have a long record of successful performance in a diverse range of industrial applications. Under severe conditions, its durable and dependable design provides longevity, precision, and consistent repeatability over millions of operations.
The compact size and adjustable features propel the LS Series to flourish in a variety of settings under space constraint without sacrificing reliability. Its construction is oil-tight, water-tight and dust tight, and includes die-cast housing, heads and actuators.
Housing Material: Zinc
Mount: Chassis Mount, Screw
Current Rating: 10 A
Max Voltage Rating (DC): 550 V
Number of Poles: 2
Number of Positions: 2:
Operating Force: 51 N
Orientation: Right Angle
Switch Function : On-Mom
Termination: Conduit
Operating Temperature : -29 C to 71 C
Throw Configuration: SPDT
Voltage Rating (AC): 120 V
Voltage Rating (DC): 115 V
Dimensions: Depth 28.7 mm, Diameter 7.2 mm, Length 102.9 mm, Width 30.2 mm
Compliance: Ratings Dust Tight, IP67, Waterproof
RoHS: Compliant
Current Rating: 10Amp 120
Pilot Duty: 600VAC Max.
Made in USA - Factory New in Manufactures' Packaging
Learn More