Special Switch

LICON – 16-114 w/ Actuator 76-1290 - Roller Switch, Limit & Manual Reset, DPST, 10A, 125/250VAC. ITW Licon Series 16 Snap Action Switch utilizes the Butterfly action for high integrity switching in a compact size. The series 16 Snap Action switch utilizes the Butterfly™ action for high integrity switching in a compact size. Using the Form Z switch circuitry, this switch can be used to control two circuits. Sub-Miniature 10A Double-Break Snap Action switch with Manual Reset. Switch mechanism utilizing a single spring element to provide lost motion. Status: Discontinued Contacts: DPST-DB. Contact Material: Silver Thermoplastic Case and Cover. Contact Ratings: 10A AC/DC, 125/250VAC. Actuator: 76-1290 Two Positions, Switch Roller Lever Maintained. Connections: Four End Solder Terminals. Mechanical: Riveted on Small Plate. Environment: IP40 Meets MIL-PRF-8805/7 Operating Design Life: Electrical – 100,000 Cycles, Mechanical 10,000,000 Cycles Body: 0.25" Width x 1.16" Length x <1.0"H. Temperature: -54C to 125 C (-65F to 275F) Note: Has an unusual mechanical reset once roller/lever is pushed and snaps. UL Recognized and CSA Certified. Applications: Industrial, Military, Aerospace Used / Removed from Equipment. Learn More

Switch, trigger. Contacts: DPST. Contact Ratings: 16Amp 125VAC/8Amp 250VAC. Actuator: Locking. Connection: screw terminals. Body Dim: 1.817" long x 0.824" wide x 0.6" behind panel. Overall with actuator locked 1.623" high. Mech: Panel. Note: Metal actuator. Learn More

Safran - Eaton - CUTLER-HAMMER - 8636K2 - Switch, Trigger.

DPST Momentary 16Amp 125VAC/DC, 8Amp 250VAC/DC.

1HP 125VAC/DC.

Tool Handle, Snap Switch, Lockable.

Trigger: Metal.

Mount: 2 Screw.

Termination: 4 Screw.

Dimensions: Length 1.329"

Type: Military Style

Learn More

Compac Engineering - Erecta Switch - 5-20-PP - 5-20-PP - Angle Body Flow Switch, Prolypropylene

The 5-20-PP Angle Body Flow Switch is the standard in OEM low flow sensor applications. 5-20 flow switches have a built in clean out port allowing the removal of the spring and poppet without dis-assembly of your plumbing. 5-20 flow switches are available in 5 factory flow sensor set points (with titanium spring in), .1 gpm, .25 gpm, .5 gpm, .75 gpm, and 1 gpm. Mount the flow switch vertically without the titanium spring and sense even lower flow rates. Built in 9/16 UNF female bosses are intended to be used with one of  several separately purchased accessory fittings.

Polypropylene version is suitable for water, soaps, and light acid flow sensor applications.

Type: Flow

Material: Polypro

Weight (lb): 0.180

Flow Range: 0.50 gpm

Adjustable: No

120-240VAC PILOT DUTY SERIES 5 PERVASIVE FLOW SWITCH0.8AMP

New Old Stock

Learn More