Toggle Switch
- Eaton - Arrow Hart - 7810-UD - AH7810UD - Motor Controller, Manual Contactor, 3 Phase, 3 Pole 30 A @ 250VAC, 20A @600VACREADY TO SHIP - ONLY 1 LEFT IN STOCK!
Eaton -Arrow Hart - AH7810-UD - Motor Controller, Manual Contactor
Industrial Grade Manual Motor Controllers
Phase: 3 Phase
Poles: 3 Pole
Amperage: 30 Amps
Voltage: 600 VAC
Termination Style: Front Wired Screw
Max. AWG Wire Size: 10 AWG
HP Rating: 7.5@240VAC, 15@480VAC, 15@60VAC
Dimensions: Height 1.7" X Width 3.7" X Diameter 2.6"
Positive-contact design enhances fast-make/slow-break
Silver-alloy contacts for maximum conductivity and service life
Back and side wire terminals accept up to #10 AWG solid copper wire. For stranded #8 AWG wire, remove terminal clamp and use ring terminal
Oversized #10 triple-combination terminal screws are vibration resistant
All molded parts are thermoplastic to resist impacts, chemicals, temperature, tracking and arcing
Insulating barrier between terminals provide isolation from each phase
Nickel-plated brass mounting yoke for superior corrosion resistance
Large toggle provides positive actuation, even with gloved hand.
Note: Arrow Hart P/N 7810-UD changed to AH7810UD following acquisition by Eaton.
High Quality Commercial - New Old Stock.
UL Class: UL508
Proudly Made in USA
Learn More - ITT - C&K - T301 - Switch, Toggle. Contacts: 3PDT.
ITT C&K - T301 Switch, Toggle.
Contacts: 3PDT.
Contact Ratings: 0.4VA / 5Amp.
Actuator: On-On.
Actuation: Vertical
Connection: 9 Right Angle Terminals.
Mech: PCB.
Note: Non threaded bushing 0.293" long.
Actuator: 0.270" long.
Proudly Made in USA
Alternate: C&K 7000 Series 7301MD9AV2BE
New Old Stock
Learn More - FORD - 3-022 - Switch, Toggle. 4 Position (3 Position + Off), Blower Motor Switch, New.Special Price $14.98 Regular Price $26.50
FORD - 3-022 - Switch, Toggle.
Contacts: 4 Position (3 Position Plus Off).
Connection: 4 Wire, 6".
Mech: Panel.
Body: 34.6mm long x 19.1mm wide behind Panel.
Heavy Duty Bracket & 4 Pin Connector
Above panel 36.4mm long x 20.2mm wide x 45.5mm high (including actuator).
Note: Blower Motor Switch.
Genuine Ford - New Old Stock - Vinatage
Learn More - CHALLENGER - 1122 - 84286-0 - Silent Toggle / Rocker Wall Switch, Double Pole, 20Amp 120/277VAC.Special Price $6.98 Regular Price $9.50READY TO SHIP - ONLY 11 LEFT IN STOCK!
CHALLENGER - 1122 Silent Toggle / Rocker Switch.
Contacts: Double Pole, Grounded.
Coloor: Brown
Contact Ratings: 20Amp 120/277VAC.
Connection: Back wired/Side wired. (Brass Screws)
Mech: For mounting in a wall mounted electrical box (wall switch).
Note: High Quality - New Old Stock.
Listed: CSA.
Learn More - CUTLER-HAMMER - 7163K2 - Switch, Industrial Toggle. Contacts: 3PDT.Special Price $18.98 Regular Price $24.50
CUTLER-HAMMER - 7163K2 Switch, Industrial Toggle.
Contacts: 3PDT.
Contact Ratings: 15Amp 125VAC/10Amp 250VAC.
Connection: Solder Terminals.
Mech: Panel, One hole.
Body: 1.84" long x 1.382" wide x 1.013" below panel, including terminals.
Note: Threaded bushing length: 0.460".
Actuator length: 0.662".
Additional spec's: 1HP 1-2PH 125-480VAC/1HP 3PH 125-600VAC.
New Old Stock
Learn More - Cutler-Hammer / Eaton * - 7600K3 - Switch, toggle. 3PDT 15Amp Center-Off$19.95Switch, toggle. 3PDT-15A. On-Off-On. Two threaded hole front panel mounting, 0.89" spacing. Screw terminals, missing screws. bulk pkg'd. Width 1.37" (34.8mm), Height 1.79" (45.5mm), Length 1.77" (45mm) NSN 5930-002403671, Made in the USA. Learn More
- Cutler-Hammer - Eaton - 7604K3 - Switch, Toggle. Contacts: 3PDT.READY TO SHIP - ONLY 45 LEFT IN STOCK!
Cutler-Hammer - Eaton - 7604K3 - Switch, Toggle. Contacts: 3PDT.
7600 Series
Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2-3PH, 115-575VAC).
Connection: Screw Terminals.
Mech: Panel Mount, Two Hole Mount at 0.873" centers.
Panel Hole: 1.861" long x 1.384" wide x 0.85" deep.
Flush Mount 1.440" long x 1.270" wide hole.
Note: Both Positions Maintained.
Genuine Cutler Hammer - New Old Stock
NSN 5930-00-410-4000
Made in USA
- CUTLER-HAMMER EATON - 7613K2 - Switch, Toggle. 3PDT Center-Off.Special Price $16.98 Regular Price $24.50
CUTLER-HAMMER EATON - 7613K2 - Switch, Toggle.
Contacts: 3PDT.
Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2PH 125-480VAC, 1HP 3PH 125-600VAC).
Actuator: Center-off ( 3 Positions maintained).
Connection: Solder Terminals.
Mech: Panel.
Panel hole: 46.5mm long x 35.1mm wide x 21.3mm high.
Standard bushing 15/32".
Shaft 0.677" long.
Note: Heavy Duty, 1HP up to 3 Phase.
NSN 5930-00-862-4559
Complete with hardware.
Applications: For appliancews,instruments, small motor drive devices.
Genuine Cutler Hammer - New Old Stock
Learn More - Cutler-Hammer / Eaton - 7611K4 - Switch, toggle. 3PDT 15Amp 125V.$19.00Out of stockSwitch, toggle. Contacts: 3PDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2PH 125-480VAC, 1HP 3PH 125-600VAC). Connection: male 1/4" QC terminals. Mech: Panel. Panel hole: 1.841" long x 1.376" wide x 0.808" high. Standard 15/32" threaded bushing x 0.470" long (0.659" long-seated). Note: Listed: CSA. Complete with hardware. Learn More
- C & K Components - 7411SHZBE - Switch, toggle. 4P On-On-On.Special Price $18.98 Regular Price $24.50
C & K Components - 7411SHZBE Switch, toggle.
Contacts: 4P.
Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC).
Actuator: On-On-On.
Connection: Solder.
Mech: PCB, vertical.
Panel hole: 0.845" long x 0.500" wide.
Note: Miniature. Threaded bushing.
Complete with hardware.
Learn More - C & K Components - 7201SY9AV2GE - Switch, toggle. 2 Position On-None-On.$8.95Switch, toggle. DP On-None-On 3A 120VAC, 2A 250VAC. Package: miniature PCB mount, RA 6 terminal, non-threaded shaft. Learn More
- DIALIGHT - 570-22 - Switch, toggle. DP. Miniature.$8.99Out of stockSwitch, toggle. Contacts: DP. Contact Ratings: 5Amp 125VAC, 2Amp 250VAC. Actuator: 3 Position, On-Off-On. Mech: PCB RA Leads, non-threaded bushing. Note: Miniature. Color: blue. Learn More
- CUTLER-HAMMER - 7580K9 - Switch, toggle. 3PDT C.O. 15Amp 125VAC.Special Price $14.98 Regular Price $17.99Out of stockSwitch, toggle. Contacts: 3PDT.C.O. Contact Ratings: 15Amp 125VAC (10Amp 250VAC, 1HP 1-2-3PH, 115-575VAC). Actuator: On-Ctr, Off-On. Connection: solder. Mech: Panel, 2 hole flange at 0.871" centers. Panel hole: 1.864" long x 1.390" wide x 0.819" deep, plus terminals. Note: 3 Position. Actuator extends to 0.800" from front mount flange. Learn More
- C & K Components - 7203SY9AV2GE - Switch, toggle. DP. Miniature.$8.99Switch, toggle. Contacts: DP. Contact Ratings: 5Amp 125VAC, 2Amp 250VAC. Actuator: 3 Position, On-Off-On. Mech: PCB RA Leads, non-threaded bushing. Note: Miniature. Color: red. Learn More
- Carlingswitch - HL250-73XN - Toggle. NEW TOGGLE 3PDT$14.953PDT Toggle Switch Circut Type Back Panel Mount Mounting On-Off Switch Action Bat Switch Type H/I Series 11amp 125vac Learn More
- C & K Components - 7301SYQE - Switch, toggle. 3PDT 5Amp 125VAC. .$4.99Switch, toggle. Contacts: 3PDT. Contact Ratings: 5Amp 125VAC, 2Amp 250VAC. Actuator: On-None-On. Connection: PC leads. Mech: PCB. Body: 0.651" long x 0.503" wide. Note: Miniature. Threaded bushing. Complete with hardware. Learn More
- C & K Components - 7301SCWCGI - Switch, toggle. 3PDT 5A 120V.
C & K Components - 7301SCWCGI Switch, toggle.
Series 7000 Miniature Toggle Switch
Contacts: 3PDT.
Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.
Actuator: On-On.
Connection: pc leads.
Mech: PCB. Panel hole: 12.7mm long x 16.8mm deep x 12.3mm high.
Threaded bushing 9.9mm long (including bushing seat).
Actuator 10.2mm long.
Note: Miniature.
Complete with hardware.
Made in the USA.
Learn More