Toggle Switch
- Honeywell/Micro Switch - 104TL226-5 - Switch, Toggle / Rocker. 4PDT, 3 Position Military GradeSpecial Price $189.98 Regular Price $250.00
Honeywell/Micro Switch - 104TL226-5 Switch, Toggle.
4PDT (Mom) On/None/Off.
125VAC 7.5Amp/250VAC 6Amp.
Resistive DC: 125V 0.75Amp/250V 0.5Amp/28VDC 7.5Amp.
Inductive load: 125VAC 7.5Amp/28VDC 7.5Amp.
Termination IWTS (16-20AWG) MIL-S-3950.
Threaded bushing length: 0.432".
Actuator length: 0.643".
Operating temperature: -85 to 160 Deg F.
Terminals accept pins M39029/1-101, not included.
Note: Military. Environmentally sealed shaft.
Learn More - Honeywell - Micro Switch - 104TL1-72 - Switch, Toggle / Rocker. Contacts: 4PDT. /MS27724-3Special Price $48.98 Regular Price $55.00READY TO SHIP - ONLY 40 LEFT IN STOCK!
Honeywell - Micro Switch - 104TL1-72 -Switch, Toggle / Rocker
Contacts: 4PDT.
Contact Ratings: 0.75 A at 115 Vdc,0.5 A at 250 Vdc,0.5 A to 20 A at 0.5 Vdc to 28 Vdc,0.5 A to 15 A at 0.5 Vac to 277 Vac.
Actuator: (On) On (On) = (Mom) On (Mom).
Mech: Bushing 15/32 in.
Operating temperature: -85degF to +160degF.
Note: Environmentally sealed switch, completely sealed switching chamber, high strength, temperature resistant, non-tracking case, material and silver cadmium oxide contacts.
Military qualified MS27724-3.
Contacts: IWTS (14-16AWG) termination.
Double listed as MS27724-3 SKU 133204
Learn More - C & K Components - 7401T1ZQE - Switch, toggle. Contacts: 4PDT.
C & K Components - 7401T1ZQE Switch, Toggle.
Contacts: 4PDT.
Contact Ratings: 5Amp.
Actuator: On/On.
Connection: Solder Terminals.
Mech: Panel Mount 0.5" D.
Note: Miniature.
Silver Plated Contacts.
Epoxy sealed. SS case.
Learn More - ITT - C&K - T301 - Switch, Toggle. Contacts: 3PDT.
ITT C&K - T301 Switch, Toggle.
Contacts: 3PDT.
Contact Ratings: 0.4VA / 5Amp.
Actuator: On-On.
Actuation: Vertical
Connection: 9 Right Angle Terminals.
Mech: PCB.
Note: Non threaded bushing 0.293" long.
Actuator: 0.270" long.
Proudly Made in USA
Alternate: C&K 7000 Series 7301MD9AV2BE
New Old Stock
Learn More - FORD - 3-022 - Switch, Toggle. 4 Position (3 Position + Off), Blower Motor Switch, New.Special Price $14.98 Regular Price $26.50
FORD - 3-022 - Switch, Toggle.
Contacts: 4 Position (3 Position Plus Off).
Connection: 4 Wire, 6".
Mech: Panel.
Body: 34.6mm long x 19.1mm wide behind Panel.
Heavy Duty Bracket & 4 Pin Connector
Above panel 36.4mm long x 20.2mm wide x 45.5mm high (including actuator).
Note: Blower Motor Switch.
Genuine Ford - New Old Stock - Vinatage
Learn More - CUTLER-HAMMER - 7163K2 - Switch, Industrial Toggle. Contacts: 3PDT.Special Price $18.98 Regular Price $24.50
CUTLER-HAMMER - 7163K2 Switch, Industrial Toggle.
Contacts: 3PDT.
Contact Ratings: 15Amp 125VAC/10Amp 250VAC.
Connection: Solder Terminals.
Mech: Panel, One hole.
Body: 1.84" long x 1.382" wide x 1.013" below panel, including terminals.
Note: Threaded bushing length: 0.460".
Actuator length: 0.662".
Additional spec's: 1HP 1-2PH 125-480VAC/1HP 3PH 125-600VAC.
New Old Stock
Learn More - Cutler-Hammer / Eaton * - 7600K3 - Switch, toggle. 3PDT 15Amp Center-Off$19.95Switch, toggle. 3PDT-15A. On-Off-On. Two threaded hole front panel mounting, 0.89" spacing. Screw terminals, missing screws. bulk pkg'd. Width 1.37" (34.8mm), Height 1.79" (45.5mm), Length 1.77" (45mm) NSN 5930-002403671, Made in the USA. Learn More
- Cutler-Hammer / Eaton * - 7665K4 - Switch, toggle. 4PDT 15A 115VAC.$17.50Switch, toggle. Contacts: 4PDT. Contact Ratings: 15A 115VAC (20Amp Resistive) 400Hz. Actuator: On-On. Connection: 12 solder contacts. Mech: Panel. Body: 1.442" (36.6mm) long x 1.332" (33.8mm) wide x 0.977" (24.8mm) high, plus contacts. Note: Threaded bushing: standard 3/8" D x 11.7mm long. Actuator: 17.1mm long. Complete with hardware. Alt P/N: MS25068-23. Learn More
- Cutler-Hammer - Eaton - 7604K3 - Switch, Toggle. Contacts: 3PDT.READY TO SHIP - ONLY 45 LEFT IN STOCK!
Cutler-Hammer - Eaton - 7604K3 - Switch, Toggle. Contacts: 3PDT.
7600 Series
Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2-3PH, 115-575VAC).
Connection: Screw Terminals.
Mech: Panel Mount, Two Hole Mount at 0.873" centers.
Panel Hole: 1.861" long x 1.384" wide x 0.85" deep.
Flush Mount 1.440" long x 1.270" wide hole.
Note: Both Positions Maintained.
Genuine Cutler Hammer - New Old Stock
NSN 5930-00-410-4000
Made in USA
- SAFRAN EATON CUTLER-HAMMER - 8512K15 - Switch, toggle. 4PDT 15A 115V.Special Price $42.98 Regular Price $56.00
SAFRAN EATON CUTLER-HAMMER - 8512K15 - Switch, toggle.
Contacts: 4PDT.
Contact Ratings: 15Amp 115VAC.
Actuator: On-On-On.
Connection: Flush terminal screws.
Mech: Panel, bushing 15/32".
Body: 41.8mm long x 33.5mm wide x 32.0mm deep behind panel.
Note: Environmentally sealed switch (watertight). 20,000 Operations at rated load.
Threaded bushing length: 12.1mm.
Actuator length:17.3mm.
Complete with hardware.
New Old Stock- Made in USA
Learn More - CUTLER-HAMMER EATON - 7613K2 - Switch, Toggle. 3PDT Center-Off.Special Price $16.98 Regular Price $24.50
CUTLER-HAMMER EATON - 7613K2 - Switch, Toggle.
Contacts: 3PDT.
Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2PH 125-480VAC, 1HP 3PH 125-600VAC).
Actuator: Center-off ( 3 Positions maintained).
Connection: Solder Terminals.
Mech: Panel.
Panel hole: 46.5mm long x 35.1mm wide x 21.3mm high.
Standard bushing 15/32".
Shaft 0.677" long.
Note: Heavy Duty, 1HP up to 3 Phase.
NSN 5930-00-862-4559
Complete with hardware.
Applications: For appliancews,instruments, small motor drive devices.
Genuine Cutler Hammer - New Old Stock
Learn More - Cutler-Hammer / Eaton - 7611K4 - Switch, toggle. 3PDT 15Amp 125V.$19.00Out of stockSwitch, toggle. Contacts: 3PDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2PH 125-480VAC, 1HP 3PH 125-600VAC). Connection: male 1/4" QC terminals. Mech: Panel. Panel hole: 1.841" long x 1.376" wide x 0.808" high. Standard 15/32" threaded bushing x 0.470" long (0.659" long-seated). Note: Listed: CSA. Complete with hardware. Learn More
- C & K Components - 7401SY9CBE - Switch, toggle. 4PDT 5Amp 120VAC.$9.95Switch, toggle. Contacts: 4PDT. Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC). Actuator: On-None-On. Connection: PC terminals. Mech: PCB, vertical. Panel hole: 0.845" long x 0.500" wide. Note: Miniature. Non-threaded bushing. Learn More
- CUTLER-HAMMER - 7580K9 - Switch, toggle. 3PDT C.O. 15Amp 125VAC.Special Price $14.98 Regular Price $17.99Out of stockSwitch, toggle. Contacts: 3PDT.C.O. Contact Ratings: 15Amp 125VAC (10Amp 250VAC, 1HP 1-2-3PH, 115-575VAC). Actuator: On-Ctr, Off-On. Connection: solder. Mech: Panel, 2 hole flange at 0.871" centers. Panel hole: 1.864" long x 1.390" wide x 0.819" deep, plus terminals. Note: 3 Position. Actuator extends to 0.800" from front mount flange. Learn More
- Cutler-Hammer / Eaton - 7692K63 - Switch, Toggle. Contacts: 4PDT.Special Price $18.98 Regular Price $24.50
Cutler-Hammer / Eaton - 7692K63 - Switch, Toggle.
Contacts: 4PDT.
Contact Ratings: 15Amp 125VAC / 10Amp 250VAC, 3/4HP 250VAC.
Actuator: On-Off-On, no bat.
Connection: 12 screw terminals.
Panel hole: 1.436" x 1.331" x 0.971" high plus threaded bushing 0.5".
Note: Center off.
New Old Stock - Made in USA
Learn More - Cutler-Hammer / Eaton - 8887K5 - AN3227-5 - Switch, Toggle. 4PDT 15Amp 125VAC.Special Price $38.98 Regular Price $48.50
Cutler-Hammer / Eaton - 8887K5 - AN3227-5 - Switch, Toggle.
Mil spec series of switches made by both Cutler-Hammer and also Arrow Hart. These switches were used in military spec equipment and aircraft from the 1940's, 1950's up to the 1960's.
Contacts: 4PDT.
Contact Ratings: 15A 125VAC/10A 250VAC.
Actuator: On-Off-Mom.
Connection: 12 Screw Terminals.
Mech: Panel, Aircraft Flange with 1.8" centers.
Flange: 1.008" wide x 2.214" high.
Body: 1.445" long x 1.338" wide x 1.338" behind panel.
Insulation Resistance: 100 MegOhms
Note: Rubber gasket/Environmentally sealed.
Double marked AN3227-5.
Alternate: 8884K5
Genuine Cutler Hammer - New Old Stock - Made in USA
Application: Aviation, Vintage World War 2 Military Grade
Learn More - C & K Components - 8946K-1079 - Switch, toggle. 4PDT Center-off.Special Price $41.95 Regular Price $59.00Switch, toggle. Contacts: 4PDT. Contact Ratings: Center-off. Connection: 1/4" male QC terminals. Mech: Panel, bushing mount. Panel hole: 1.449" long x 1.305" wide x 0.992" high, plus all contacts, bushing and actuator. Overall 2.555" long. Note: Heavy duty. Learn More
- C & K Components - 7401SYW3BE - Switch, toggle. 4PDT 5Amp 120VAC.Special Price $4.98 Regular Price $11.99Out of stockSwitch, toggle. Contacts: 4PDT. Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC). Actuator: On-None-On. Connection: Wirewrap terminals. Mech: PCB, vertical. Panel hole: 0.845" long x 0.500" wide. Note: Miniature. Threaded bushing. Complete with hardware. Learn More
- C & K Components - 7413SH3ZQE - Switch, toggle. 4PDT 5Amp 125VAC. Miniature.Special Price $4.50 Regular Price $6.00Switch, toggle. Contacts: 4PDT. Contact Ratings: 5Amp 125VAC, 2Amp 250VAC. Actuator: On-On-(Mom). Connection: solder. Mech: PCB or Panel. Panel hole: 0.844" long x 0.5" wide. Note: Miniature. Threaded 1/4" bushing. Learn More
- Cutler Hammer - SF24STW191 - Switch, Toggle, min. 4PDT 6A 125V.
Cutler Hammer - SF24STW191 - Switch, Toggle, Miniature.
Contacts: 4PDT- Special Circuitry.
Contact Ratings: 6A-125VAC.
Actuator: 3-Positions.
Connection: Silver-Plated Solder Terminals. 12 Solder Terminals
Mech: Panel mount, 0.25" threaded bushing x 7.7mm long. Body: 0.51" x 0.88" x 0.68" behind panel.
Note: Center-On, Alternating on: Poles 1&2, Poles 2&3, Poles 3&4 work in the three positions.
Genuine Cutler Hameer - New Old Stock
Alternate: APEM 5266AB
Learn More - Cutler-Hammer / Eaton - 7695K5 - Switch, toggle. 4PDT 15Amp 125VAC.$19.00Switch, toggle. Contacts: 4PDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC). Connection: solder. Mech: Panel. Body: 1.440" long x 1.338" wide x 0.967" high. Standard 15/32" threaded bushing x 0.481" long. Note: Listed: CSA. Complete with hardware. Made in the USA. Learn More
- Carlingswitch - HL250-73XN - Toggle. NEW TOGGLE 3PDT$14.953PDT Toggle Switch Circut Type Back Panel Mount Mounting On-Off Switch Action Bat Switch Type H/I Series 11amp 125vac Learn More
- C & K Components - 7415SH3ZQE - Switch, toggle. 4PDT 5A 125VAC.$19.00Switch, toggle. Contacts: 4PDT. Contact Ratings: 5Amp 125VAC/ 2Amp 250VAC. Actuator: Mom-On-Mom. Connection: solder terminals. Body: 0.842" long x 0.502" wide x 0.592" high including terminals. Note: Miniature. With 0.315" keyway threaded. Made in the USA. Learn More
- C & K Components - 7301SYQE - Switch, toggle. 3PDT 5Amp 125VAC. .$4.99Switch, toggle. Contacts: 3PDT. Contact Ratings: 5Amp 125VAC, 2Amp 250VAC. Actuator: On-None-On. Connection: PC leads. Mech: PCB. Body: 0.651" long x 0.503" wide. Note: Miniature. Threaded bushing. Complete with hardware. Learn More