Toggle Switch
- Unidentified MFG - TS-81 - Switch, toggle. SPDT 5A 125V.IN STOCK - MORE THAN 100 READY TO SHIP!
TS-81 - Switch, toggle Switch, toggle.
Contacts: SPDT.
Contact Ratings: 5Amp 125VAC, 2Amp 250VAC.
Actuator: On-Off-On.
Connection: PC leads.
Mech: PCB RA.
Body: 12.8mm long x 6.9mm wide x 9.3mm high.
Note: Miniature. Bushing: 7.3mm long. Actuator: 10.8mm long.
Learn More - UNITED SWITCH CORP - MTS-102-C3 - Switch, Toggle Miniature. SPDT 6A 125V, Right Angle..IN STOCK - MORE THAN 5,000 READY TO SHIP!
UNITED SWITCH CORP - MTS-102-C3 Switch, Toggle.
The MTS Series miniature toggle switches offer numerous actuator options and termination options including right angle PC mount. These toggle switches offer up to 4 poles. They are PCB mounted and are available in through whole or right angle termination.
Contacts: SPDT.
Contact Ratings: 6Amp 125VAC/3Amp 250VAC.
Actuator Switch Method: On/On.
Connection: 3 PCB Right Angle Terminals.
Mechanical Mount: PCB.
Short Handle
Epoxy Sealed - Black
Miniature Lever.
Dimensions: Switch Body 0.500" Wide, 0.785" Lone (Minus Toggle), 0.270" Height (12.70mmX19mmx6.86mm)
Life:>100,000 Cycles
Applications include Telecommunications, Instrumentation, Networking and Medical Equipment. Several families of MTS toggle switches are available, and many people used them in guitar effector.
- Cutler-Hammer / Eaton - 8866K64 - Switch, toggle. SPDT 1Amp 115VAC inductive. MS21354-231. New.$15.99Switch, toggle. Contacts: SPDT. Contact Ratings: 2Amp 115VAC 60Hz (Res load), 4Amp 28VDC (Res load), 1Amp 115VAC 60Hz (Inductive load), 1Amp 28VDC (Inductive load). Actuator: On-On. Connection: PC Leads, tarnished, cleanable. Mech: PCB. Note: Military double marked MS21354-231. Military NSN 5930-010433006. New, complete with hardware. Learn More
- Carlingswitch - 2GK53-NBL3 - Model XSC1 - Switch, Toggle with Paddle, DPST 15A 125V, 10Amp 250VAC.IN STOCK - MORE THAN 100 READY TO SHIP!
Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.
G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.
Contacts: DPST. Double Pole, On-None-Off
Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC
Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465"
Use .250" Tab Terminations
Note: With Hardware.
Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01
New Old Stock
Learn More - Carling Switch - 3-367 - Switch, toggle. SPDT 6Amp 125VAC.
Switch, Toggle.
Contacts: SPDT.
Contact Ratings: 6Amp 125VAC, 3Amp 250VAC (1/4HP 125-250VAC).
Actuator: Onn-Off (Mom).
Dielectric Strength: 1,000 V RMS (minimum)
Insulation Resistance: 100 megohms (minimum)
Base Material: Phenolic
Actuator Style: Bat Toggle
Connection: Male 1/4" QC terminals.
Mech: Panel, Standard 3/8" D x 0.476" (12.1mm) long, bushing mount.
Panel hole: 1.328" (33.7mm) long x 0.756" (19.2mm) wide x 0.809" (20.5mm) high, plus contacts.
Note: Center off.
Flat bat 0.305" 97.7mm) wide at base x 0.640" (16.2mm) long, from bushing.
New Old Stock
UL Listed, CSA Approved
Learn More - Carlingswitch - DB101-PBB - Switch, Paddle. SPDT. 125VAC 10AmpREADY TO SHIP - ONLY 69 LEFT IN STOCK!
Carlingswitch - DB101-PBB Switch, Paddle.
Contacts: SPDT.
Contact Ratings: 125VAC/10Amp 1/2HP, 250VAC/5Amp.
Actuator: Plastic, black. Mech: Panel.
Body: 0.858" wide x 0.495" deep behind panel.
Panel hole: Overall: 1.002" wide x 0.584" wide.
Bushing length: 0.286" long. Paddle length: 0.686" long.
Contacts: (3) 1/4" male quick connect terminals.
Note: Listed: CSA.
Learn More - C & K Components - 7103J60ZMI32 - Switch, Paddle. SPDT 5A 125V.IN STOCK - MORE THAN 100 READY TO SHIP!
C & K Components - 7103J60ZMI32 Switch, Toggle/Paddle.
Contacts: SPDT.
Contact Ratings: 5Amp 120V, 2Amp 250V.
Contact Material: Silver
Operating Temperature: -30 C to 85 C
Actuator: On-Off-On.
Connection: PC leads.
Mech: Panel, Snap-in.
Panel Hole: 17mm long x 12mm wide x 17mm behind panel plus contacts.
Note: Red Paddle J60 actuator.
Electrical Life: 40,000 Cycles
Complete with black bezel 19.43mm long x 15.62mm wide.
New Old Stock
Learn More - JBT - JMT-123 - NSN 5930-00-027-0247 - Switch, Toggle Assembly. Contacts: SPDT.
JBT - JMT-123 - 5930-00-027-0247 -Switch, Toggle.
Aircraft Toggle Switches - Panel Mount
Contacts: SPDT.
Contacts: Silver
Contact Ratings: 5Amp 125VAC, 3Amp 250VAC.
Actuator: Both Switches are On-On.
Mounting Faceplate 1.317" wide x 3.150" high.
Right Angle Mountable Edge/Flange with 2 holes at 2.15" centers.
Note: Two SPDT Miniature Toggle Switches with only SPST in use.
Assembly marked HI has three wires, LO has 2 wires from switch, joined to a 3 Position male connector.
Proudly Made in USA
Switch Alternates: A123S1YZQE, 7101SYZQ, 7101SYZQE, MST-105D
UPC 0767842189378
NSN: 5930-00-027-0247
Note: Surplus Assembly for a Discontinued Project - New
- EATON - JBT - 3-627 - Switch, Toggle. Contacts: SPDT Center-off. 6A, 125 VACIN STOCK - MORE THAN 100 READY TO SHIP!
EATON - JBT - 3-627 Switch, Instrument Toggle.
Contacts: SPDT.
Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.
Actuator: Center-Off, 1 side momentary, ON/OFF/(ON).
Bushing Diameter: 0.24"
Connection: 3 Solder Terminals.
Mech: PCB. Miniature Toggle.
New Old Stock - Made in USA
Learn More - JBT - PFH-4223P - Switch, Toggle. SPDT 20Amp 125VAC.
JBT - PFH-4223P Switch, Toggle, Heavy Duty AC Industrial
Contacts: SPDT.
Contact Ratings: 20Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC, 1/2HP 125VAC).
Actuator: Off-On.
Connection: Brass Male 1/4" Quick Connect Terminals.
Mech: Panel, standard 3/8" D x 0.470" (11.9mm) long, bushing mount.
Panel hole: 1.339" (34.0mm) long x 0.750" (19.0mm) wide x 0.811" (20.6mm) high, plus contacts.
Note: Flat Bat 0.362" (9.2mm) wide x 0.653" (16.5mm) long.
Vintage - New Old Stock
Typical Applications: Marine, Food Service, Generator, Industrial Control ,Office Automation
Proudly Made in USA
Learn More - Cutler-Hammer / Eaton * - 8906K5367 - Switch, toggle. SPDT 10Amp 115VAC.Special Price $18.98 Regular Price $24.95Cutler-Hammer / Eaton - 8906K4919 Switch, Toggle. SPDT Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 10A 125VAC. Mech: Panel, bushing (11.7mm) long. Panel hole: 30.1mm long x 12.4mm wide x 18.4mm deep plus contacts, behind panel. Overall Dimensions: 31.9mm long x 15.0mm wide x 23.9mm deep, plus contacts Connections: Male 1/4" Quick Connect Terminals. Note: Actuator: 17.2mm long. Environmentally Sealed. Factory new, complete with hardware, indiv packaged. Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Actuator: Momentary-both-sides, Must Pull-to-switch One side only. Aircraft-Instrument Military-Purpose Style Learn More
- Eaton - Cutler-Hammer - AN3023-9 - 8713K14 - Switch, Toggle. DPST 20Amp.
Eaton - Cutler-Hammer - AN3023-9 - 8713K14 Switch, Toggle.
Contacts: DPST.
Contact Ratings: 20Amp.
Actuator: On-Off(Mom).
Normally Closed.
Connection: Screw Terminals.
Mech: Panel with 2 holes 1.85" centers.
Body: Flange 2.123" long x 1.262" wide x 0.046" thick.
Overall 2.123" long x 1.5" wide x 0.953" high plus contacts.
Note: Double marked AN3023-9 and ST55L.
NSN: 5930-00-548-5328
Genuine Vintage Cutler Hammer - New Old Stock
Made in the USA.
Learn More - Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle. Contacts: DPST (2 Position).
Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle.
The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications.
Contacts: DPST (2 Position).
Contact Ratings: 6Amp @ 125VAC, 3Amp @ 250VAC, 2Amp 277VAC.
Elect Config: Off - None - On
Terminatuion: Solder Terminals.
Mech: Panel Mount with Threads.
Body: 1.317" long x 0.753" wide x 1" behind panel, including terminals. (33.3X31.8X14.3mm)
Note: Bushing: 3/8" D x 0.50" long.
Actuator: Bat 0.544" long.
Complete with Hardware.
Approvals: CSA, UL, RoHS Compliant
Genuine Cutler Hammer - New Old Stock
Alternate: Newark 04M4782, Allied 70155741, UPC 786685680514
Applications: Industrial
Learn More - Cutler-Hammer / Eaton - 3-678 - Switch, Toggle. Contacts: DPST 6A 125V.Special Price $4.98 Regular Price $6.95IN STOCK - MORE THAN 100 READY TO SHIP!
Cutler-Hammer / Eaton - 3-678 Switch, toggle.
Contacts: DPST. Contact
Ratings: 6Amp 125VAC / 3Amp 250VAC (2.5 A L 125VAC 2A 277VAC).
Connection: solder terminals.
Mech: Bushing length: 0.462" D x 0.462" long. Body: 1.339" long x 0.75" wide x 1.198" deep including terminals.
Actuator: plastic, black.
Made in USA
Learn More - Cutler-Hammer / Eaton - 7560K53 - Switch, toggle. DPST 15Amp 125VAC.Special Price $4.95 Regular Price $5.95Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: Panel. Body: 1.321" long x 0.747" wide x 0.735" high. Standard 15/32" threaded bushing x 0.478" long (seated 0.664" long). Note: No Bat. Learn More
- Carling Switch - T203 - Switch, toggle. SPDT-8A.
Carling Switch, Toggle, Paddle.
SPDT-8A@125VAC, 4A @250.
Dielectric Strength: 1,000 V RMS (Min)
Insulation Resistance: 100 Megohms (Min.)
Center-off.
Three Position.
Material: Nylon
Mounting Hole Dimensions: .515" x .625"; (13.08mm x 15.87mm)
Termination: Solder Lug Terminals.
Approvals: UL, CSA
New Old Stock
Learn More - C & K Components - 7000 Series - Switch, Toggle, SPDT, 0.4VAIN STOCK - MORE THAN 100 READY TO SHIP!
C & K Components - SP-ITI - 7000 Series Switch, Toggle.
Contacts: SPDT.
Contact Ratings: 0.4VA, 20V Max.
Actuator: ON-On.
Connection: Right Angle PCB leads.
Mech: Through hole - PCB.
Note: Non-threaded bushing.
Short bat.
Sealed Miniature switch.
Listed: UL/CSA.
Color: Red.
Learn More - TYCO/ALCOSWITCH - A105J4ZQ00 - Switch, rocker, paddle. Contacts: SPDT.$2.99Out of stockSwitch, rocker, paddle. Contacts: SPDT. Contact Ratings: 5Amp. Actuator: (on)-Off-(On), Bat long. Connection: 6 solder terminals, silver contacts. Mech: 1-3/8" mount centers. Note: Cross: 6-1571986-0. Rohs compliant. Learn More
- JBT - ST50M - Switch, toggle. Contacts: DPST, 15A 125VAC, 6.0A 250 VAC.Special Price $24.98 Regular Price $32.50
JBT - ST50M - Switch, Toggle.
Contacts: DPST.
Current: 15A @ 125 VAC
Current: 6.0A @250 VAC
Actuator: Off-On(Mom).
Connection: 4 Screw Terminals.
Mech: Single hole mount/bushing.
Dimensions: Width: 0.75 in, Height: 2.2 in, Length: 1.32 in
Note: Threaded bushing: 0.460" D x 0.460" long.
Actuator length: 0.694" long.
NSN 5930-00-615-5364
Made in the USA.
Learn More - FUJISOKU - ATE1D - Switch, toggle. SPDT.$2.00Switch, toggle. Contacts: SPDT. Contact Ratings: 48VDC 0.05Amp. Actuator: On-On. Mech: PCB RA miniature. Note: Long flat bat. Learn More
- FORD - 3-022 - Switch, Toggle. 4 Position (3 Position + Off), Blower Motor Switch, New.Special Price $14.98 Regular Price $26.50
FORD - 3-022 - Switch, Toggle.
Contacts: 4 Position (3 Position Plus Off).
Connection: 4 Wire, 6".
Mech: Panel.
Body: 34.6mm long x 19.1mm wide behind Panel.
Heavy Duty Bracket & 4 Pin Connector
Above panel 36.4mm long x 20.2mm wide x 45.5mm high (including actuator).
Note: Blower Motor Switch.
Genuine Ford - New Old Stock - Vinatage
Learn More - Cutler-Hammer / Eaton - 8801K23 - Switch, toggle. SPST 15Amp 115VAC. MS35058-24. New.$15.99Out of stockSwitch, toggle. Contacts: SPST. Contact Ratings: 15Amp 115VAC. Actuator: On-Off. Mech: Panel, with screw terminals. Threaded bushing. Panel hole: 1.137" long x 0.632" wide x 0.622" high, plus bushing 0.525" long, and actuator. Note: Military double marked MS35058-24. NSN 5930-006551516. All are new individually packaged with hardware. Learn More
- Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle. DPST 6Amp 125VAC.Special Price $9.98 Regular Price $14.50Out of stock
Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle.
This line of switches employs a quick-make/quick-break contact mechanism. The resultant high-speed movement eliminates the “teasing” of the switch and reduces the pitting of the contact surfaces due to arcing. Self-cleaning and wiping contact action assures positive contact on switch operation. These switches are especially suited for use in small motor applications.
Contacts: DPST.
Contact Material: Bronze Silver Plated
Contact Mechanism: Quick-make/quick-break wiping action
Contact Ratings: 6Amp 125VAC, 3Amp 250VDC.
Actuator: On-Off.
Mounting means: Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/inch
Keyway—0.068 x 0.035 in (1.73 x.89 mm) deep, provides anti-rotation featureConnection: Screw terminals, no hardware. #5-40 X 5/32"
Mech: Panel, Standard 15/32-32 threaded bushing seated 0.540" long.
Body: 1.156" long, plus contacts x 0.689" wide x 0.592" deep, plus contacts.
Note: P/N: 8372K7 is 8372K107.
NSN 5930-00-283-8804
Listed UL/CSA. RoHS Compliant
Made in the USA.
Learn More - Cutler-Hammer / Eaton - 3-139 - Switch, toggle. Contacts: DPST.Special Price $4.98 Regular Price $6.50
Cutler-Hammer / Eaton - 3-139 Switch, toggle.
Contacts: DPST.
Contact Ratings: 6Amp 125VAC.
Actuator: On/Off.
Connection: Solder Terminals.
Mech: panel, 0.45" threaded bushing.
New Old Stock
Learn More