Toggle Switch

TS-81 - Switch, toggle Switch, toggle.

Contacts: SPDT.

Contact Ratings: 5Amp 125VAC, 2Amp 250VAC.

Actuator: On-Off-On.

Connection: PC leads.

Mech: PCB RA.

Body: 12.8mm long x 6.9mm wide x 9.3mm high.

Note: Miniature. Bushing: 7.3mm long. Actuator: 10.8mm long.

Learn More

UNITED SWITCH CORP - MTS-102-C3 Switch, Toggle.

The MTS Series miniature toggle switches offer numerous actuator options and termination options including right angle PC mount. These toggle switches offer up to 4 poles. They are PCB mounted and are available in through whole or right angle termination.

Contacts: SPDT.

Contact Ratings: 6Amp 125VAC/3Amp 250VAC.

Actuator Switch Method: On/On.

Connection: 3 PCB Right Angle Terminals.

Mechanical Mount: PCB.

Short Handle

Epoxy Sealed - Black

Miniature Lever.

Dimensions: Switch Body 0.500" Wide, 0.785" Lone (Minus Toggle), 0.270" Height (12.70mmX19mmx6.86mm) 

Life:>100,000 Cycles

Applications include Telecommunications, Instrumentation, Networking and Medical Equipment. Several families of MTS toggle switches are available, and many people used them in guitar effector.

 

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 2Amp 115VAC 60Hz (Res load), 4Amp 28VDC (Res load), 1Amp 115VAC 60Hz (Inductive load), 1Amp 28VDC (Inductive load). Actuator: On-On. Connection: PC Leads, tarnished, cleanable. Mech: PCB. Note: Military double marked MS21354-231. Military NSN 5930-010433006. New, complete with hardware. Learn More

Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.

G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.

Contacts: DPST. Double Pole,  On-None-Off

Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC

Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465" 

Use .250" Tab Terminations

Note: With Hardware.

Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01

New Old Stock

Learn More

Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC (1/4HP 125-250VAC).

Actuator: Onn-Off (Mom).

Dielectric Strength: 1,000 V RMS (minimum)

Insulation Resistance: 100 megohms (minimum)

Base Material: Phenolic

Actuator Style: Bat Toggle

Connection: Male 1/4" QC terminals.

Mech: Panel, Standard 3/8" D x 0.476" (12.1mm) long, bushing mount.

Panel hole: 1.328" (33.7mm) long x 0.756" (19.2mm) wide x 0.809" (20.5mm) high, plus contacts.

Note: Center off.

Flat bat 0.305" 97.7mm) wide at base x 0.640" (16.2mm) long, from bushing.

New Old Stock

UL Listed, CSA Approved

Learn More

Carlingswitch - DB101-PBB Switch, Paddle.

Contacts: SPDT.

Contact Ratings: 125VAC/10Amp 1/2HP, 250VAC/5Amp.

Actuator: Plastic, black. Mech: Panel.

Body: 0.858" wide x 0.495" deep behind panel.

Panel hole: Overall: 1.002" wide x 0.584" wide.

Bushing length: 0.286" long. Paddle length: 0.686" long.

Contacts: (3) 1/4" male quick connect terminals.

Note: Listed: CSA. 

Learn More

C & K Components - 7103J60ZMI32 Switch, Toggle/Paddle.

Contacts: SPDT.

Contact Ratings: 5Amp 120V, 2Amp 250V.

Contact Material: Silver

Operating Temperature: -30 C to 85 C

Actuator: On-Off-On.

Connection: PC leads.

Mech: Panel, Snap-in.

Panel Hole: 17mm long x 12mm wide x 17mm behind panel plus contacts.

Note: Red Paddle J60 actuator.

Electrical Life: 40,000 Cycles

Complete with black bezel 19.43mm long x 15.62mm wide.

New Old Stock

Learn More

JBT - JMT-123 - 5930-00-027-0247 -Switch, Toggle.

Aircraft Toggle Switches - Panel Mount

Contacts: SPDT.

Contacts: Silver

Contact Ratings: 5Amp 125VAC, 3Amp 250VAC.

Actuator: Both Switches are On-On.

Mounting Faceplate 1.317" wide x 3.150" high.

Right Angle Mountable Edge/Flange with 2 holes at 2.15" centers.

Note: Two SPDT Miniature Toggle Switches with only SPST in use.

Assembly marked HI has three wires, LO has 2 wires from switch, joined to a 3 Position male connector.

Proudly Made in USA

Switch Alternates: A123S1YZQE, 7101SYZQ, 7101SYZQE, MST-105D

UPC 0767842189378

NSN: 5930-00-027-0247

Note: Surplus Assembly for a Discontinued Project - New

 

Learn More

EATON - JBT - 3-627 Switch, Instrument Toggle.

Contacts: SPDT.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.

Actuator: Center-Off, 1 side momentary, ON/OFF/(ON).

Bushing Diameter: 0.24"

Connection: 3 Solder Terminals.

Mech: PCB. Miniature Toggle.

New Old Stock - Made in USA

Learn More

JBT - PFH-4223P Switch, Toggle, Heavy Duty AC Industrial

Contacts: SPDT.

Contact Ratings: 20Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC, 1/2HP 125VAC).

Actuator: Off-On.

Connection: Brass Male 1/4" Quick Connect Terminals.

Mech: Panel, standard 3/8" D x 0.470" (11.9mm) long, bushing mount.

Panel hole: 1.339" (34.0mm) long x 0.750" (19.0mm) wide x 0.811" (20.6mm) high, plus contacts.

Note: Flat Bat 0.362" (9.2mm) wide x 0.653" (16.5mm) long.

Vintage - New Old Stock

Typical Applications: Marine, Food Service, Generator, Industrial Control ,Office Automation

Proudly Made in USA

Learn More

Cutler-Hammer / Eaton - 8906K4919 Switch, Toggle. SPDT Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 10A 125VAC. Mech: Panel, bushing (11.7mm) long. Panel hole: 30.1mm long x 12.4mm wide x 18.4mm deep plus contacts, behind panel. Overall Dimensions: 31.9mm long x 15.0mm wide x 23.9mm deep, plus contacts Connections: Male 1/4" Quick Connect Terminals. Note: Actuator: 17.2mm long. Environmentally Sealed. Factory new, complete with hardware, indiv packaged. Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Actuator: Momentary-both-sides, Must Pull-to-switch One side only. Aircraft-Instrument Military-Purpose Style Learn More

Eaton - Cutler-Hammer - AN3023-9 - 8713K14 Switch, Toggle.

Contacts: DPST.

Contact Ratings: 20Amp.

Actuator: On-Off(Mom).

Normally Closed.

Connection: Screw Terminals.

Mech: Panel with 2 holes 1.85" centers.

Body: Flange 2.123" long x 1.262" wide x 0.046" thick.

Overall 2.123" long x 1.5" wide x 0.953" high plus contacts.

Note: Double marked AN3023-9 and ST55L.

NSN: 5930-00-548-5328

Genuine Vintage Cutler Hammer - New Old Stock

Made in the USA.

Learn More

Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle.

The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications.

Contacts: DPST (2 Position).

Contact Ratings: 6Amp @ 125VAC, 3Amp @ 250VAC, 2Amp 277VAC.

Elect Config: Off - None - On

Terminatuion: Solder Terminals.

Mech: Panel Mount with Threads.

Body: 1.317" long x 0.753" wide x 1" behind panel, including terminals. (33.3X31.8X14.3mm)

Note: Bushing: 3/8" D x 0.50" long.

Actuator: Bat 0.544" long.

Complete with Hardware.

Approvals: CSA, UL, RoHS Compliant

Genuine Cutler Hammer - New Old Stock

Alternate: Newark 04M4782, Allied 70155741, UPC 786685680514

Applications: Industrial

Learn More

Cutler-Hammer / Eaton  - 3-678 Switch, toggle.

Contacts: DPST. Contact

Ratings: 6Amp 125VAC / 3Amp 250VAC (2.5 A L 125VAC 2A 277VAC).

Connection: solder terminals.

Mech: Bushing length: 0.462" D x 0.462" long. Body: 1.339" long x 0.75" wide x 1.198" deep including terminals.

Actuator: plastic, black.

Made in USA

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: Panel. Body: 1.321" long x 0.747" wide x 0.735" high. Standard 15/32" threaded bushing x 0.478" long (seated 0.664" long). Note: No Bat. Learn More

Carling Switch, Toggle, Paddle.

SPDT-8A@125VAC, 4A @250.

Dielectric Strength: 1,000 V RMS (Min)

Insulation Resistance: 100 Megohms (Min.)

Center-off.

Three Position.

Material: Nylon

Mounting Hole Dimensions: .515" x .625"; (13.08mm x 15.87mm)

Termination: Solder Lug Terminals. 

Approvals: UL, CSA

New Old Stock

Learn More

C & K Components - SP-ITI - 7000 Series Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 0.4VA, 20V Max.

Actuator: ON-On.

Connection: Right Angle PCB leads.

Mech: Through hole - PCB.

Note: Non-threaded bushing.

Short bat.

Sealed Miniature switch.

Listed: UL/CSA.

Color: Red.

Learn More

Switch, rocker, paddle. Contacts: SPDT. Contact Ratings: 5Amp. Actuator: (on)-Off-(On), Bat long. Connection: 6 solder terminals, silver contacts. Mech: 1-3/8" mount centers. Note: Cross: 6-1571986-0. Rohs compliant. Learn More

JBT - ST50M - Switch, Toggle.

Contacts: DPST.

Current: 15A @ 125 VAC

Current: 6.0A @250 VAC

Actuator: Off-On(Mom).

Connection: 4 Screw Terminals.

Mech: Single hole mount/bushing.

Dimensions: Width: 0.75 in, Height: 2.2 in, Length: 1.32 in

Note: Threaded bushing: 0.460" D x 0.460" long.

Actuator length: 0.694" long.

NSN 5930-00-615-5364

Made in the USA.

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 48VDC 0.05Amp. Actuator: On-On. Mech: PCB RA miniature. Note: Long flat bat. Learn More

FORD - 3-022 - Switch, Toggle.

Contacts: 4 Position (3 Position Plus Off).

Connection: 4 Wire, 6".

Mech: Panel.

Body: 34.6mm long x 19.1mm wide behind Panel.

Heavy Duty Bracket & 4 Pin Connector

Above panel 36.4mm long x 20.2mm wide x 45.5mm high (including actuator).

Note: Blower Motor Switch.

Genuine Ford - New Old Stock - Vinatage

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15Amp 115VAC. Actuator: On-Off. Mech: Panel, with screw terminals. Threaded bushing. Panel hole: 1.137" long x 0.632" wide x 0.622" high, plus bushing 0.525" long, and actuator. Note: Military double marked MS35058-24. NSN 5930-006551516. All are new individually packaged with hardware. Learn More

Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle.

This line of switches employs a quick-make/quick-break contact mechanism. The resultant high-speed movement eliminates the “teasing” of the switch and reduces the pitting of the contact surfaces due to arcing. Self-cleaning and wiping contact action assures positive contact on switch operation. These switches are especially suited for use in small motor applications.

Contacts: DPST.

Contact Material: Bronze Silver Plated

Contact Mechanism: Quick-make/quick-break wiping action

Contact Ratings: 6Amp 125VAC, 3Amp 250VDC.

Actuator: On-Off.

Mounting means: Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/inch
Keyway—0.068 x 0.035 in (1.73 x.89 mm) deep, provides anti-rotation feature

Connection: Screw terminals, no hardware. #5-40 X 5/32"

Mech: Panel, Standard 15/32-32 threaded bushing seated 0.540" long.

Body: 1.156" long, plus contacts x 0.689" wide x 0.592" deep, plus contacts.

Note: P/N: 8372K7 is 8372K107.

NSN 5930-00-283-8804

Listed UL/CSA. RoHS Compliant

Made in the USA.

Learn More

Cutler-Hammer / Eaton - 3-139 Switch, toggle.

Contacts: DPST.

Contact Ratings: 6Amp 125VAC.

Actuator: On/Off.

Connection: Solder Terminals.

Mech: panel, 0.45" threaded bushing.

New Old Stock

Learn More